Investigation of ECD conformational transition mechanism of GLP-1R by molecular dynamics simulations and Markov state model

文献情報

出版日 2019-03-25
DOI 10.1039/C9CP00080A
インパクトファクター 3.676
著者

Qifeng Bai, Horacio Pérez-Sánchez, Shuxia Shang, Xiaoli An, Xiaojun Yao


原文を見る

要旨

As a member of the class B G protein-coupled receptors (GPCRs), the glucagon-like peptide-1 (GLP-1) can regulate the blood glucose level by binding to the glucagon-like peptide-1 receptor (GLP-1R). Since the extracellular domain (ECD) of GLP-1R is considered as one of the binding sites of GLP-1, the open and closed states of ECD play an important role in the binding process of GLP-1. To investigate the transition path of GLP-1R ECD, the crystal structures of GLP-1R in its bound and unbound states (apo-state) are chosen to perform a total of 1.6 μs of molecular dynamics simulations. The simulated results show that the ECD of GLP-1R closes in the GLP-1 bound state and opens in the GLP-1 unbound state. To determine the critical role that GLP-1 played in regulating the open and closed states of the ECD, we applied the independent gradient model (IGM) to the simulation trajectories. We found that the “hand-like” N-terminal of the GLP-1R ECD plays an important role in the GLP-1 binding. In contrast, the apo-state GLP-1R ECD opens and exposes the two ligand binding domains of GLP-1 after 200 ns of simulations. To elucidate the open and closed mechanisms of GLP-1R ECD in the apo-state and GLP-1 bound state, the Markov state model (MSM) is performed on the MD simulation trajectories. Our results provide possible transition pathways from the closed state to open state of the apo-state GLP-1R ECD. Each pathway contains several intermediate states that correspond to different local minima in deep wells. The dynamical relationships and the most possible conversion pathway between two states are detailed through the MSM analysis. Our results profile the conformation transition mechanism of the GLP-1R ECD and will help in hypoglycemic peptide design of GLP-1R.

関連文献

Salt-induced reentrant hydrogel of poly(ethylene glycol)–poly(lactide-co-glycolide) block copolymers

Ting Li, Tianyuan Ci, Liang Chen, Lin Yu, Jiandong Ding

2013-09-26 Paper

DOI: 10.1039/C3PY01107K

Facile preparation and cell imaging applications of fluorescent organic nanoparticles that combine AIE dye and ring-opening polymerization

Xiqi Zhang, Xiaoyong Zhang, Bin Yang, Junfeng Hui, Meiying Liu, Zhenguo Chi, Siwei Liu, Jiarui Xu, Yen Wei

2013-09-10 Communication

DOI: 10.1039/C3PY01143G

A comparative study of polymers containing naphthodifuranone and benzodifuranone units in the main chain

Haichang Zhang, Jun Zhang, Bernd Tieke

2013-09-30 Paper

DOI: 10.1039/C3PY01101A

Preparation of a D–A polymer with disilanobithiophene as a new donor component and application to high-voltage bulk heterojunction polymer solar cells

Joji Ohshita, Makoto Nakashima, Daiki Tanaka, Yasushi Morihara, Hiroyuki Fueno, Kazuyoshi Tanaka

2013-10-17 Communication

DOI: 10.1039/C3PY01157G

Precise evaluation of the block copolymer nanoparticle growth in polymerization-induced self-assembly under dispersion conditions

Yang Su, Xin Xiao, Shentong Li, Meihan Dan, Xiaohui Wang, Wangqing Zhang

2013-08-30 Paper

DOI: 10.1039/C3PY00995E

Synthesis and volume phase transition of concanavalin A-based glucose-responsive nanogels

Ting Ye, Suting Yan, Yumei Hu, Li Ding, Weitai Wu

2013-08-07 Paper

DOI: 10.1039/C3PY00778B

Microporous organic polymers with acetal linkages: synthesis, characterization, and gas sorption properties

Li-Min Zhang, Tao Wang, Bao-Hang Han

2013-08-22 Paper

DOI: 10.1039/C3PY00854A

Click chemistry as a powerful and chemoselective tool for the attachment of targeting ligands to polymer drug carriers

Robert Pola, Alena Braunová, Richard Laga, Michal Pechar, Karel Ulbrich

2013-10-29 Paper

DOI: 10.1039/C3PY01376F

On the effect of using RAFT and FRP for the bulk synthesis of acrylic and methacrylic molecularly imprinted polymers

Carlo Gonzato, Pamela Pasetto, Fahmi Bedoui, Pierre-Emmanuel Mazeran, Karsten Haupt

2013-10-24 Paper

DOI: 10.1039/C3PY01246H

こちらもおすすめ

化合物よくある質問

S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?

取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...

84682-36-02-Amino-7,7-dimethox...
化合物よくある質問

8-硝基-咪唑并[1,2-a]吡啶とは何ですか?

8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...

52310-46-08-Nitroimidazo[1,2-a...
化合物よくある質問

4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?

4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...

1454849-84-3(4-Bromo-5-methoxy-2...
化合物よくある質問

全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?

全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...

306-98-91,1,2,2,3,3,4,4,5,6-...
化合物よくある質問

3-(溴甲基)苯乙酸の主な用途は何ですか?

3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。

118647-53-32-(3-(Bromomethyl)ph...
化合物よくある質問

5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?

5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...

23368-84-55-Iodo-4-methoxy-6-m...
化合物よくある質問

1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?

実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...

380225-68-31-(2-Bromo-6-methoxy...
化合物よくある質問

5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?

5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...

1352037-60-55-(4,4,5,5-Tetrameth...
化合物よくある質問

4-溴萘-1-甲酸の代替品はありますか?

4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...

16650-55-84-Bromo-1-naphthoic ...
化合物よくある質問

ε-白藜芦醇脱氢二聚体の代替品はありますか?

ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...

62218-08-05-{(2R,3R)-6-Hydroxy...

掲載誌

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自己引用率: 10.3%
年間論文数: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。