Unraveling the interactions in fast co-pyrolysis of microalgae model compounds via pyrolysis-GC/MS and pyrolysis-FTIR techniques

文献情報

出版日 2018-12-10
DOI 10.1039/C8RE00227D
インパクトファクター 4.239
著者

Ribhu Gautam, R. Vinu


原文を見る

要旨

A fundamental understanding of reaction chemistry and pathways in fast pyrolysis of microalgae is hindered by the complex structure of proteins, lipids and carbohydrates that constitute them and the interactions among the intermediates at short timescales. In this study, bovine serum albumin (BSA), sunflower oil (SO) and potato starch (PS) were chosen as microalgae model compounds representing proteins, lipids, and carbohydrates, respectively. Fast pyrolysis of individual and binary mixtures of the model compounds was investigated at 500 °C using an analytical pyrolysis reactor interfaced with a gas chromatograph/mass spectrometer (GC/MS) and a Fourier transform infrared spectrometer (FTIR) to investigate the composition of pyrolysates and their time evolution. The composition of BSA, SO and PS was chosen to be 1 : 2, 1 : 1 and 2 : 1 (wt. basis) to emulate the microalgae composition. Fast pyrolysis of BSA : SO mixtures promoted esterification of carboxylic acids and alcohols, whereas BSA : PS and SO : PS mixtures promoted the formation of carboxylic acids via syn-elimination of esters, while inhibiting the decarboxylation pathway. The presence of SO and PS altered the pyrolysis mechanism of BSA by inhibiting the formation of aromatic hydrocarbons and nitrogen-containing compounds. The time evolution of C–H (aromatic and aliphatic), N–H, O–H, and CO stretching vibrations was monitored up to 60 s using in situ FTIR. The maximum vapor evolution time for fast pyrolysis of SO (50 s) was higher than that for BSA and PS (both 8–10 s). The addition of BSA and PS to SO increased the rate of evolution of volatiles, with the maximum vapor evolution occurring at shorter time periods. The first order apparent rate constants of fast pyrolysis followed the trend: 0.294 s−1 (PS) > 0.162 s−1 (BSA) > 0.107 s−1 (BSA : PS (2 : 1)) > 0.073 s−1 (BSA : SO (2 : 1)) > 0.048 s−1 (SO : PS (2 : 1)). Fast pyrolysis char was characterized by FTIR and GC/MS, and it contained polycyclic nitrogen compounds. The plausible reactions including the interactions among the various intermediates were unraveled, and a tentative mechanism was proposed.

関連文献

Axial chirality control of troposBIPHEP–Rh complexes by chiral dienes: synergy effect in catalytic asymmetric hydrogenation‡

Kohsuke Aikawa, Yūki Takabayashi, Susumu Kawauchi, Koichi Mikami

2008-09-30 Communication

DOI: 10.1039/B809683J

DNA-embedded Au/Ag core–shell nanoparticles

Dong-Kwon Lim, In-Jung Kim, Jwa-Min Nam

2008-09-15 Communication

DOI: 10.1039/B810195G

Ruthenium polypyridyl peptide conjugates: membrane permeable probes for cellular imaging

Ute Neugebauer, Yann Pellegrin, Marc Devocelle, William Signac, Niamh Moran

2008-09-12 Communication

DOI: 10.1039/B810403D

Identification of oligo(p-phenylene vinylene)–naphthalene diimide heterocomplexes by scanning tunneling microscopy and spectroscopy at the liquid–solid interface

Inge De Cat, Cornelia Röger, Cameron C. Lee, Freek J. M. Hoeben, Maarten J. Pouderoijen, Albertus P. H. J. Schenning, Frank Würthner, Steven De Feyter

2008-10-07 Communication

DOI: 10.1039/B811961A

Deprotonative cadmation of functionalized aromatics

Jean-Martial L’Helgoual’ch, Floris Chevallier, Mitsuhiro Yonehara, Masanobu Uchiyama, Aïcha Derdour, Florence Mongin

2008-09-17 Communication

DOI: 10.1039/B809543D

Molecularly imprinted cavities template the macrocyclization of tetrapeptides

Dar-Fu Tai, Yee-Fung Lin

2008-09-29 Communication

DOI: 10.1039/B813439A

Design of chiral bifunctional secondary amine catalysts for asymmetric enamine catalysis

Taichi Kano, Keiji Maruoka

2008-09-10 Feature Article

DOI: 10.1039/B809301F

Contents and Chemical Biology

Front/Back Matter

DOI: 10.1039/B817178P

Back cover

Front/Back Matter

DOI: 10.1039/B817550K

こちらもおすすめ

化合物よくある質問

アエポキシアビレーターONE酢酸エステルを含む廃棄物はどのように処理すべきですか?

アエポキシアビレーターONE酢酸エステルを含む廃棄物は、焼却や専門廃棄処理が一般的です。具体的には、廃棄物は密閉容器に収集し、適切な温度と湿度の下で保存します。...

2484719-11-9a-Epoxyabiraterone A...
化合物よくある質問

4-ヒドロキシ但線を取り扱う際の実験室安全事項は何ですか?

取り扱いには化学製品安全管理データシート(SDS)を参照してください。温度10℃以下で保存し、密閉容器に保管してください。漏れ時にはドラフトチャンバーを使用し、...

25714-71-04-Hydroxybutanal
化合物よくある質問

4-(3-環戊基尿素)フェノールボロネートはどの業界で使用されていますか?

4-(3-環戊基尿素)フェノールボロネートは主に医薬品産業で使用されています。この化合物は抗炎症薬や抗うつ薬の候補物質として研究されています。また、ポリマー産業...

874297-80-01-Cyclopentyl-3-[4-(...
化合物よくある質問

N~1~-[3-氯-5-(三氟甲基)-2-吡啶]-1,2-乙二胺の市場動向や研究トレンドはどうですか?

市場では、安全性と効果性を基にした化学物質の需要が高まっています。研究分野では、環境に優しい代替品の開発が進んでおり、その結果、この化合物の市場需要は減少傾向に...

219478-19-0N'-[3-chloro-5-(trif...
化合物よくある質問

6-硝基苯并二氢吡喃-4-酮についての法規ガイドラインは何ですか?

6-硝基苯并二氢吡喃-4-酮(CAS番号: 68043-53-8)は、GHS(統一化された化学品の危険性的分類と標識)で急性毒性第4クラスに分類されます。EUで...

68043-53-86-Nitro-2,3-dihydro-...
化合物よくある質問

5-(肼甲基)-2-甲基吡啶の主な用途は何ですか?

5-(肼甲基)-2-甲基吡啶は、主に医薬品の合成材料や農薬、及び一部の化学試薬として使用されています。

1016705-16-05-(Hydrazinomethyl)-...
化合物よくある質問

6-乙酰基-2(3H)-苯并噻唑酮は安全ですか?

安全性は化合物の使用方法によります。適切な取扱いと防護措置を講じれば、一定の安全性があります。ただし、吸入や皮膚への接触は避けてください。

133044-44-76-Acetyl-1,3-benzoth...
化合物よくある質問

3-メチル-6-(1-メチルヒドラジニル)ピリジジンはどの業界で使用されていますか?

3-メチル-6-(1-メチルヒドラジニル)ピリジジンは主に医薬品、ポリマー、センサー製造業界で使用されています。特に、医薬品産業では抗がん剤や抗真菌剤の候補物質...

175135-44-13-Methyl-6-(1-methyl...
化合物よくある質問

tert-butyl 5-oxo-2,6-diazaspiro[3.4]octane-2-carboxylateの物理化学的性質は何ですか?

tert-butyl 5-オキソ-2,6-ジアザスパイロ[3.4]オクタネ-2-カルボキサongyangはCAS番号1330765-39-3で、分子量は334....

1330765-39-32-Methyl-2-propanyl ...
化合物よくある質問

3-塩素メチルフェニル-4,4,5,5-テトラメチル-1,3,2-ジオキソボロラノールは安全ですか?

3-塩素メチルフェニル-4,4,5,5-テトラメチル-1,3,2-ジオキソボロラノールは、毒性が低いと考えられていますが、直接的な皮膚接触や吸入は避けるべきです...

1073353-44-22-[3-(Chloromethyl)p...

掲載誌

Reaction Chemistry & Engineering

Reaction Chemistry & Engineering
CiteScore: 0
自己引用率: 8.8%
年間論文数: 284

Reaction Chemistry & Engineering is an interdisciplinary journal reporting cutting-edge research focused on enhancing the understanding and efficiency of reactions. Reaction engineering leverages the interface where fundamental molecular chemistry meets chemical engineering and technology. Challenges in chemistry can be overcome by the application of new technologies, while engineers may find improved solutions for process development from the latest developments in reaction chemistry. Reaction Chemistry & Engineering is a unique forum for researchers whose interests span the broad areas of chemical engineering and chemical sciences to come together in solving problems of importance to wider society. All papers should be written to be approachable by readers across the engineering and chemical sciences. Papers that consider multiple scales, from the laboratory up to and including plant scale, are particularly encouraged.

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。