Correction: Thermoresponsive gels directly obtained via visible light-mediated polymerization-induced self-assembly with oxygen tolerance
文献情報
Kaixuan Ren
Correction for ‘Thermoresponsive gels directly obtained via visible light-mediated polymerization-induced self-assembly with oxygen tolerance’ by Kaixuan Ren et al., Polym. Chem., 2017, DOI: 10.1039/c7py00558j.
関連文献
Conjugated microporous copolymer networks with enhanced gas adsorption
Miao Yu, Xiaoyan Wang, Xiao Yang, Yang Zhao, Jia-Xing Jiang
DOI: 10.1039/C5PY00295H
Synthesis of polymer-silica hybrid microparticles with defined geometry using surface initiated atom transfer radical polymerization
F. del Monte, D. P. Finn, W. Wang, A. Pandit
DOI: 10.1039/C5PY00228A
Copolymerization of propylene with Si-containing α,ω-diolefins: how steric hindrance of diolefins affects long chain branch formation
Bin Wang, Yi-Ming Zhang, Zhe Ma, Li Pan, Shi-Jun Yu
DOI: 10.1039/C6PY00333H
A study on tunable AIE (AIEE) of boron ketoiminate-based conjugated polymers for live cell imaging
Chunhui Dai, Dongliang Yang, Xiao Fu, Qingmin Chen, Chengjian Zhu, Yixiang Cheng, Lianhui Wang
DOI: 10.1039/C5PY00733J
Disk-like micelles with cylindrical pores from amphiphilic polypeptide block copolymers
Xue Lin, Xiaohua He, Chaoqun Hu, Yuxiang Chen, Yiyong Mai, Shaoliang Lin
DOI: 10.1039/C6PY00152A
A novel porphyrin-containing polyimide for memory devices
Ming-Chi Tsai, Chin-Li Wang, Ching-Yao Lin, Chia-Liang Tsai, Hung-Ju Yen, Huei-Chi You, Guey-Sheng Liou
DOI: 10.1039/C6PY00158K
Real time quantification of the chemical cross-link density of a hydrogel by in situ UV-vis spectroscopy
Xiaomin Kang, You Yu, Yu Bao, Wanhao Cai, Shuxun Cui
DOI: 10.1039/C5PY00513B
Synthesis of highly porous poly(tert-butyl acrylate)-b-polysulfone-b-poly(tert-butyl acrylate) asymmetric membranes
Yihui Xie, Nicolas Moreno, Hong Cheng, Pei-Ying Hong, Rachid Sougrat, Ali R. Behzad, Russell Tayouo, Suzana P. Nunes
DOI: 10.1039/C6PY00215C
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.










phosphoryl}methyl 4-methylbenzenesulfonate structure {[3-(Hexadecyloxy)propoxy](hydroxy)phosphoryl}methyl 4-methylbenzenesulfonate structure](https://static.chemtradehub.com/structs/864/864068-45-1-ba7c.webp)
![1-[(4-Methylphenyl)sulfonyl]-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrrolo[2,3-b]pyridine-5-carbonitrile structure 1-[(4-Methylphenyl)sulfonyl]-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrrolo[2,3-b]pyridine-5-carbonitrile structure](https://static.chemtradehub.com/structs/143/1434747-57-5-fc0d.webp)


