Investigation of the surface plasmon polariton and electrochemical properties of covalent and non-covalent functionalized reduced graphene oxide
文献情報
The surface electronic properties of graphene oxide (GO) were modified through reduction and functionalization. Non-covalent functionalization was found to be superior compared to covalent functionalization due to the formation of few-layer graphene with a low defect content and average crystalline length. Because of the restoration of sp2 hybridization, non-covalently functionalized reduced graphene oxide (rGO) showed a better plasmonic response compared to GO, rGO and covalently functionalized rGO. Due to the available π electrons from the sp2 network of graphene as well as surface functionality, non-covalent functionalized rGO exhibited elevated donor density. Furthermore, due to the synergistic effect of surface electronic properties as well as adsorption and recombination at the barrier, superior charge transfer was achieved at the electrode–electrolyte interface for non-covalent functionalized rGO.
関連文献
Spiro[fluorene-9,9′-xanthene]-based hole shuttle materials for effective defect passivation in perovskite solar cells
Bommaramoni Yadagiri, Sanjay Sandhu, Ashok Kumar Kaliamurthy, Francis Kwaku Asiam, Jongdeok Park, Appiagyei Ewusi Mensah, Jae-Joon Lee
DOI: 10.1039/D3TA05915D
Optimizing dense particles for efficient thermochemical fuel generation through a unified particle-level model
Shuai Deng
DOI: 10.1039/D3TA05437C
Adjustable oil adhesion on superamphiphobic copper surfaces for controlled oil droplet transport
Wen Si, Xin Dai, Shiping He
DOI: 10.1039/D3TA05800J
Industrial-scale efficient alkaline water electrolysis achieved with sputtered NiFeV-oxide thin film electrodes for green hydrogen production
Quoc-Nam Ha, Chen-Hao Yeh, Noto Susanto Gultom
DOI: 10.1039/D3TA05699F
Microwave-assisted synthesis of ZIF-9@xGO composites as cooperative electrocatalysts for electro-oxidation of benzyl alcohols coupled with H2 production
Sayantan Chongdar, Anirban Ghosh, Asim Bhaumik
DOI: 10.1039/D3TA04894B
rGO coated cotton fabric and thermoelectric module arrays for efficient solar desalination and electricity generation
Amrit Kumar Thakur, Wayesh Qarony, Md Shamim Ahamed, Y. Ma
DOI: 10.1039/D3TA04715F
Correction: Achieving highly efficient CO2 to CO electroreduction exceeding 300 mA cm−2 with single-atom nickel electrocatalysts
Hui-Yun Jeong, Mani Balamurugan, Eun-suk Jeong, Uk Sim
DOI: 10.1039/D3TA90261G
Adsorptive separation of saccharides and polyols over materials functionalized with boronate groups
Irina Delidovich, Valérie Toussaint
DOI: 10.1039/D3GC04049F
Expression of concern: Interfacial adsorption study of nitrogen based inhibitors in silane nanocontainers as anticorrosive and self-healing material for steel in strong acid solution
DOI: 10.1039/D3TA90267F
こちらもおすすめ
噻奈普汀乙酯の物理化学的性質は何ですか?
CAS番号66981-77-9の噻奈普汀乙酯は、結晶性白色粉末であり、分子量は476.9 g/molです。この化合物は水に溶けにくく、一般的には有機溶媒で溶解し...
アミピシリン不純物Fとは何ですか?
アミピシリン不純物Fは、CAS番号124774-48-7の化合物です。これは、抗生物質アミピシリンの生産過程で生成される不純物の一つであり、(4S)-2-({[...
イリジウム(I)ヘキサフルオロフォスファートの代替品はありますか?
イリジウム(I)ヘキサフルオロフォスファートの代替品として、他の有機金属化合物や非有機金属化合物が使用されることがあります。具体的には、ダイゾニウム塩や他の金属...
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物はどのように処理すべきですか?
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物は、安全な方法で処理する必要があります。まず、廃棄物を適切な容器に収集し、避けて保管します。次に、専門の廃棄処理業者...
2-甲基辛-1-醇を取り扱う際の実験室安全事項は何ですか?
取り扱う際は、密閉のゴーグルと手袋を着用することが推奨されます。ドラフトチャンバーを使用し、漏洩時には速やかに取り扱いを中止し、適切な排気設備を使用してください...
3α-アセトキノイドコレステロールエステルはどのように保存すればよいですか?
3α-アセトキノイドコレステロールエステルは、常温から低温(0-5℃)の暗所で保存し、密閉容器に入れることで安定性を保つことが推奨されます。また、湿気や酸素から...
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸の主な用途は何ですか?
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸は、化学合成の触媒としての使用や、医薬品の合成材料としての役割があります。また、特定の合成路線で使用...
(2S,3R)-2-氨基-3-甲基丁二酸はどのように合成されますか?
(2S,3R)-2-氨基-3-甲基丁二酸は、2-ヒドロキシ-3-メチル丁酸とアミノ化反応を行うことで合成されます。触媒としてジクロロメタンが使用され、選択性と収...
1-Benzyl-2-phenyl-1H-imidazoleはどのように保存すればよいですか?
この化合物は常温で避けてください。直射日光を避け、密閉容器で保存し、湿気を防水の容器に入れて保管してください。
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![4-(4-{4-[4-Fluoro-3-(trifluoromethyl)phenyl]-1-methyl-1H-imidazol-2-yl}-1-piperidinyl)-1H-pyrazolo[3,4-d]pyrimidine 4-methylbenzenesulfonate (1:1) structure 4-(4-{4-[4-Fluoro-3-(trifluoromethyl)phenyl]-1-methyl-1H-imidazol-2-yl}-1-piperidinyl)-1H-pyrazolo[3,4-d]pyrimidine 4-methylbenzenesulfonate (1:1) structure](https://static.chemtradehub.com/structs/108/1082949-68-5-00b6.webp)

