Regulation of transport properties by polytypism: a computational study on bilayer MoS2
文献情報
Swastika Banerjee, Cheol Seong Hwang, Jung-Hae Choi, Seung-Cheol Lee
Being a member of the van der Waals class of solids, bilayer MoS2 exhibits polytypism due to different possible stacking arrangements, namely, 2Hc, 2Ha and 3R-polytypes. Unlike monolayer MoS2, these bilayers exhibit indirect band gaps. Band extrema states originate from a linear combination of Mo-(d) and S-(p) orbitals which are sensitive to the interlayer interactions. We have studied the impact of stacking pattern on the electronic structure and electron/hole transport properties of these polytypes. Based on first-principles computations coupled with the Boltzmann transport formalism, we found that a strong electron–hole anisotropy can be realised in the 2Ha-MoS2 polytype unlike in a monolayer which is isotropic in nature. A staggered arrangement between two layers results in a higher relaxation time for electrons compared to holes leading to anisotropy which is of importance in device engineering.
関連文献
Synthesis of well-defined epoxy-functional spherical nanoparticles by RAFT aqueous emulsion polymerization
Fiona L. Hatton, Joseph R. Lovett, Steven P. Armes
DOI: 10.1039/C7PY01107E
Chemoenzymatic synthesis of a peptide containing nylon monomer units for thermally processable peptide material application
Kenjiro Yazawa, Joan Gimenez-Dejoz, Takaaki Hikima, Keiji Numata
DOI: 10.1039/C7PY00770A
Thiophene-benzothiadiazole based D–A1–D–A2 type alternating copolymers for polymer solar cells
Quoc Viet Hoang, Mohammad Afsar Uddin, Han Young Woo
DOI: 10.1039/C7PY00696A
A high mobility DPP-based polymer obtained via direct (hetero)arylation polymerization
Jean-Rémi Pouliot, Bin Sun, Mikaël Leduc, Ahmed Najari, Yuning Li, Mario Leclerc
DOI: 10.1039/C4PY01222D
The origin of bisignate circularly polarized luminescence (CPL) spectra from chiral polymer aggregates and molecular camphor: anti-Kasha's rule revealed by CPL excitation (CPLE) spectra
Sang Thi Duong, Michiya Fujiki
DOI: 10.1039/C7PY00958E
Enhanced stability of conductive polyacetylene in ladder-like surface-grafted brushes
Michał Szuwarzyński, Karol Wolski, Szczepan Zapotoczny
DOI: 10.1039/C6PY00977H
Self-assembly and functionalization of alternating copolymer vesicles
Chuanlong Li, Chuanshuang Chen, Shanlong Li, Tahir Rasheed, Ping Huang, Tong Huang, Yinglin Zhang, Wei Huang, Yongfeng Zhou
DOI: 10.1039/C7PY00908A
Polymer grafted recyclable magnetic nanoparticles
Lei Wang, Marcus Cole, Junting Li, Yang Zheng, Yung Pin Chen, Kristen P. Miller
DOI: 10.1039/C4PY01134A
Synthesis and characterization of bead-like poly(N-isopropylacrylamide) copolymers with double decker silsesquioxane in the main chains
Kun Wei, Lei Wang, Lei Li, Sixun Zheng
DOI: 10.1039/C4PY00786G
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![(3R,5R)-1-[(Benzyloxy)carbonyl]-5-methyl-3-piperidinecarboxylic acid structure (3R,5R)-1-[(Benzyloxy)carbonyl]-5-methyl-3-piperidinecarboxylic acid structure](https://static.chemtradehub.com/structs/126/1269757-29-0-c552.webp)

![(2E)-3-(3-Chlorophenyl)-N-{2-[4-(methylsulfonyl)-1-piperazinyl]-2-oxoethyl}acrylamide structure (2E)-3-(3-Chlorophenyl)-N-{2-[4-(methylsulfonyl)-1-piperazinyl]-2-oxoethyl}acrylamide structure](https://static.chemtradehub.com/structs/250/2505001-54-5-c1e9.webp)