Etching of electrodeposited Cu2O films using ammonia solution for photovoltaic applications
文献情報
Changqiong Zhu, Matthew J. Panzer
Impurities at the surface of electrodeposited p-Cu2O films have been efficiently removed through the use of concentrated aqueous ammonia solution as a wet etching agent. The performance of the Cu2O homojunction photovoltaic devices incorporating etched p-Cu2O as the bottom layer is higher compared to devices with as-deposited p-Cu2O layers due to an improvement of the homojunction interface quality. Reducing the density of defect states that act as carrier recombination centers led to larger open circuit voltages. The ammonia etchant has been found to preferentially interact with the {100} facets of Cu2O and expose a greater number of {111} facets, resulting in increased interface area for etched homojunction devices, which also improved short circuit current density values.
関連文献
Synthesis of amidoxime functionalized cellulose derivatives as a reducing agent and stabilizer for preparing gold nanoparticles
Ruigang Liu, Hongliang Kang, Yunming Sun, Fengying Dong
DOI: 10.1039/C3PY00052D
Well-defined graft copolymers of tert-butyldimethylsilyl methacrylate and poly(dimethylsiloxane) macromonomers synthesized by RAFT polymerization
Marlène Lejars, André Margaillan, Christine Bressy
DOI: 10.1039/C3PY00196B
Catalytic Y-tailed amphiphilic homopolymers – aqueous nanoreactors for high activity, low loading SCS pincer catalysts
Joseph P. Patterson, Pepa Cotanda, Elizabeth G. Kelley, Adam O. Moughton, Annhelen Lu, Thomas H. Epps, III, Rachel K. O'Reilly
DOI: 10.1039/C3PY21137A
Synthesis and characterization of fluorinated polyionomers. Part I: polyperfluoro-sulfonylethoxy propylene vinyl ether sulfonimides containing aryl sulfonic acids
Anna M. Flach, Frederick E. Johnson, Israel Cabasso
DOI: 10.1039/C3PY00315A
Folate-conjugated poly(N-(2-hydroxypropyl)methacrylamide-co-methacrylic acid) nanohydrogels with pH/redox dual-stimuli response for controlled drug release
Yuan-Jia Pan, Dian Li, Sha Jin, Chuan Wei, Ke-Yi Wu, Jia Guo, Chang-Chun Wang
DOI: 10.1039/C3PY00249G
Rate enhanced nitroxide-mediated miniemulsion polymerization: effect of nitroxide water solubility
Yi Guo, Mary E. Tysoe, Per B. Zetterlund
DOI: 10.1039/C3PY00305A
Activation of homogenous polyolefin catalysis with a machine-assisted reactor laboratory-in-a-box (μAIR-LAB)
Benjamin A. Rizkin, Ryan L. Hartman
DOI: 10.1039/D0RE00139B
Fully bio-based poly(l-lactide)-b-poly(ricinoleic acid)-b-poly(l-lactide) triblock copolyesters: investigation of solid-state morphology and thermo-mechanical properties
Benoit Gadenne, Carine Alfos
DOI: 10.1039/C3PY00300K
A one component methodology for the fabrication of honeycomb films from biocompatible amphiphilic block copolymer hybrids: a linear–dendritic–linear twist
Marie V. Walter, Pontus Lundberg, Daniel Hult, Anders Hult, Michael Malkoch
DOI: 10.1039/C3PY00053B
Fluorescence turn-on detection of DNA based on the aggregation-induced emission of conjugated poly(pyridinium salt)s
Jingfen Sun, Yan Lu, Lei Wang, Dandan Cheng, Yujiao Sun, Xianshun Zeng
DOI: 10.1039/C3PY00350G
こちらもおすすめ
2,5-二羧基氟苯の市場動向や研究トレンドはどうですか?
2,5-二羧基氟苯の市場は、主に医薬品および農薬の研究開発において伸長しています。一方、環境への影響や安全性の懸念から、その使用は一定の制限が置かれています。今...
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物はどのように処理すべきですか?
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物は専門的な廃棄処理が必要です。具体的には、廃棄物は密閉の容器に収集し、適切な危険物対策を講じて専門業者に引...
2-(1,3-二氧杂烷-2-基)噻唑の物理化学的性質は何ですか?
CAS番号24295-04-3の2-(1,3-二氧杂烷-2-基)噻唑は、結晶形態により白色粉末を呈します。分子量は208.23 g/molであり、水に溶けにくい...
L-beta-高酪氨酸塩酸塩は安全ですか?
L-beta-高酪氨酸塩酸塩自体は毒性は低く、しかし使用する際は適切な個人保護具を使用し、誤飲や皮膚への接触を避けることが推奨されます。
睡茄灯笼草素Cはどのように合成されますか?
睡茄灯笼草素Cは、シクラメンケチャナfromaceaeから抽出する方法や、化学合成法で合成することができます。典型的な化学合成法では、3β,22-二オキシエクス...
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯はどのように保存すればよいですか?
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯は直射日光を避けて、室温で保存するのが良いです。湿度を避けて密閉容器に入れて保管し、未使用の状態で長期保存することができ...
NBI-74330の主な用途は何ですか?
NBI-74330は主に薬理学研究および医療用途に使用されています。その主な用途は抗がん作用を有するため、がん治療の研究に使用されています。
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸はどのように合成されますか?
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸は、6-トリフルオロメチル-2-クロロピリジンとボリルリチウムを触媒なしで反応させることで合成するこ...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.










![1,1',1'',1'''-[Disulfanediylbis(carbonothioylnitrilo)]tetraethane structure 1,1',1'',1'''-[Disulfanediylbis(carbonothioylnitrilo)]tetraethane structure](https://static.chemtradehub.com/structs/97-/97-77-8-f3e4.webp)



