An assessment of nanosponges for intravenous and oral drug delivery of BCS class IV drugs: Drug delivery kinetics and solubilization
文献情報
Kelly A. Gilmore
Polyester nanosponges were prepared with varied degrees of crosslinking densities of ∼4%, ∼7% and ∼10% and an average nanoscopic size of 100 nm. The crosslinking density and the influence towards the release kinetics of paclitaxel, a BCS class IV drug, for individual particles and a mixture of particles with two different crosslinking densities are investigated in buffer and gastrointestinal fluid to show fully adjustable release rates suitable for intravenous and oral delivery.
おすすめジャーナル
関連文献
Glycopolymer–peptidebioconjugates with antioxidant activity via RAFT polymerization
Haiting Shi, Li Liu, Xiaobei Wang, Jingyi Li
DOI: 10.1039/C2PY20021J
Preparation and characterization of semiconducting polymeric blends. Photochemical synthesis of poly(3-alkylthiophenes) using host microporous matrices of poly(vinylidene fluoride)
Maria Beny Pinto Zakia, José Godoy Filho, João Sinezio de Carvalho Campos
DOI: 10.1039/C2PY00003B
One-step RAFT synthesis of well-defined amphiphilic star polymers and their self-assembly in aqueous solution
Christoph Herfurth, Paula Malo de Molina, Christoph Wieland, Sarah Rogers, Michael Gradzielski
DOI: 10.1039/C2PY20126G
2-(2,3,4,5,6-Pentafluorophenyl)-1H-benzo[d]imidazole, a fluorine-rich building block for the preparation of conjugated polymer donors for organic solar cell applications
Marios Neophytou, Heraklidia A. Ioannidou, Christos L. Chochos, Solon P. Economopoulos, Panayiotis A. Koutentis, Grigorios Itskos, Stelios A. Choulis
DOI: 10.1039/C2PY20198D
Cyclopenta[c]thiophene oligomers based solution processable D–A copolymers and their application as FET materials
Anjan Bedi, Satyaprasad P. Senanayak, Soumyajit Das, K. S. Narayan, Sanjio S. Zade
DOI: 10.1039/C2PY20032E
The scope for synthesis of macro-RAFT agents by sequential insertion of single monomer units
Shadi Houshyar, Daniel J. Keddie, Graeme Moad, Roger J. Mulder, Simon Saubern, John Tsanaktsidis
DOI: 10.1039/C2PY00529H
A new story of cyclodextrin as a bulky pendent group causing uncommon behaviour to random copolymers in solution
Fuji Sakai, Guosong Chen, Ming Jiang
DOI: 10.1039/C2PY00614F
Formation of spherical nanoparticles in poly(amic acid) films
Tomohito Ogura, Yuta Saito, Tomoya Higashihara, Mitsuru Ueda
DOI: 10.1039/C2PY20093G
こちらもおすすめ
6- bromo-1-cyclopropyl-1H-benzimidazoleの市場動向や研究トレンドはどうですか?
6- bromo-1-cyclopropyl-1H-benzimidazoleは、抗炎症、抗ウイルス作用を持つことが報告されており、新薬開発の研究対象として注目...
環氧プロpanol-d5を取り扱う際の実験室安全事項は何ですか?
取り扱う際には、防護眼鏡と手袋を使用し、ドラフトチャンバー内で操作することを推奨します。漏洩時には適切な手順で処理し、安全データシートを常に参照してください。
2,2’-ジメチル-3,3’-ビピリジンはどのように合成されますか?
2,2’-ジメチル-3,3’-ビピリジンは、ピリジンと2-メチルアクリルアミドを有機合成反応で合成します。この反応では、ピリジンと2-メチルアクリルアミドを含有...
6-甲基ピリジン-2-ボリック酸の主な用途は何ですか?
6-甲基ピリジン-2-ボリック酸は、合成化学、医薬品合成、以及研究用途などに広く使用され、特に組換えDNA技術や分子生物学の研究において重要な役割を果たします。
(R)-3-(1-甲基-2-氧環己基)プロpano酸メチルは安全ですか?
(R)-3-(1-甲基-2-氧環己基)プロpano酸メチルは一定の安全性がありますが、直接的な皮膚接触や吸入は避けるべきです。使用する際は適切な個々の安全データ...
ketorolacはどのように保存すればよいですか?
ketorolacは、密封して遮光容器に保管し、直射日光や高温を避けて保存してください。温度は常温で保存し、湿度をなるべく低く保つことが推奨されます。
L-2,3-二氨基丙酸二盐酸盐を取り扱う際の実験室安全事項は何ですか?
L-2,3-二氨基丙酸二盐酸盐は腐食性が強く、皮膚や粘膜に刺激を与える可能性があります。取り扱う際は、防塵マスク、ゴーグル、手袋を使用し、適切な排気設備を使用し...
2-(4-溴ピリジン-2-基)乙腈の物理化学的性質は何ですか?
2-(4-溴ピリジン-2-基)乙腈のCAS番号は312325-73-8です。主に結晶形態で存在し、分子量は159.01 g/molです。この化合物は水に溶けやす...
3-フローロ-[1,1-ベンジレン]-3,4-ジカルボン酸を取り扱う際の実験室安全事項は何ですか?
この化合物は毒性は低いですが、直接的な接触や吸入に注意が必要です。PPE(個人防護具)を着用し、ドラフトチャンバーを使用して操作することを推奨します。また、漏洩...
3-(1-氧代-1,3-二氢-2H-2-异吲哚)丙酸の主な用途は何ですか?
3-(1-氧代-1,3-二氢-2H-2-异吲哚)丙酸は、薬理学研究や医薬品製造において広く用いられる化合物です。また、工業的な用途でも一部の化学反応の触媒や助剤...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.












![6-Bromo-2,3-dihydro-1H-pyrido[2,3-b][1,4]oxazine structure 6-Bromo-2,3-dihydro-1H-pyrido[2,3-b][1,4]oxazine structure](https://static.chemtradehub.com/structs/120/1203499-17-5-b4d1.webp)

