Probe dependent anomalies in the solvation dynamics of coumarin dyes in dimethyl sulfoxide–glycerol binary solvent: confirming the local environments are different for coumarin dyes
文献情報
Somnath Koley, Harveen Kaur, Subhadip Ghosh
The solvation dynamics of coumarin dyes in dimethyl sulfoxide (DMSO)–glycerol (GLY) binary mixtures were studied across the GLY concentrations. Three coumarin dyes with widely different hydrophobicities were used for probing the entire polarity regions of this solvent mixture. Multiple anomalous concentration regions with significantly slow solvation times were detected from all three coumarin dyes. However, their precise positions were found to be probe molecule dependent. The solvation dynamics of the moderately hydrophobic dye coumarin 480 (C480) maintain a plateau region with a similar solvation time (∼550 ps) with the increase in GLY concentration until XGLY (the mole fraction of glycerol) reaches 0.5. This plateau region is followed by a sudden slowdown (to ∼975 ps) on the addition of more GLY to the DMSO–GLY mixture, and then this slow region persists from XGLY ∼ 0.55 to 0.65 (peak at 0.6). On further addition of GLY (XGLY > 0.7), the solvation dynamics again become slower to ∼828 ps (at XGLY ∼ 0.8) from ∼612 ps (at XGLY ∼ 0.7). For very high GLY-content samples (XGLY > 0.85), the solvation times remain similar on further changes of the GLY concentrations. In contrast to C480, the most hydrophobic dye coumarin 153 (C153) shows a linear increase of solvation time in the DMSO–GLY mixture, from 102 ps (at XGLY ∼ 0.1) to 946 ps (at XGLY ∼ 0.9) with increase in GLY concentration, except for the concentration region, XGLY ∼ 0.45–0.55 (peak at 0.5), where a substantial slowdown of the solvation time is observed. The highly hydrophilic probe coumarin 343 (C343) demonstrates multiple concentration regions (XGLY ∼ 0.05–0.10, 0.25–0.35 and 0.55–0.65) where the solvation dynamics are significantly retarded. The presence of probe dependent anomalies in the DMSO–GLY mixture is a clear indication of there being different locations of probe molecules within this solvent mixture. We assume that the slowing-down of the solvation time could be a reflection of several aspects, including the inherit inhomogeneity, intriguing structural transformations in the DMSO–GLY mixture, percolation among DMSO molecules and network structure formation, where DMSO:GLY complexes contribute to the dynamical features.
関連文献
Composite membranes based on polyvinyl alcohol and lamellar solids for water decontamination
Maria Bastianini, Michele Sisani, Annarita Petracci, Irene Di Guida, Riccardo Narducci
DOI: 10.1039/D3NJ04942F
Cartilage-inspired rapid in situ fabrication of seamless interlocked electrolyte–electrode interface for high-performance flexible supercapacitors
Yu Guo, Yinghui Shang, Bingqian Jiao, Yuting Guo, Yujing Tang, Saiji Shen, Dongbei Wu, Xia Wang, Wenju Li, Qigang Wang
DOI: 10.1039/D3TA04985J
Tailoring the Pt/ionomer interface for enhancing the local oxygen transport in proton exchange membrane fuel cells
DOI: 10.1039/D3TA03720G
Natural ten-membered lactones: sources, structural diversity, biological activity, and intriguing future
Vsevolod Dubovik, Anna Dalinova, Alexander Berestetskiy
DOI: 10.1039/D3NP00013C
Selective production of γ-valerolactone from biomass-derived levulinic acid over a Ni/CMK-3 catalyst
Rui Zhang, Xishang Song, Han Wu, Yunqi Zhai, Yina Qiao, Zhihao Yu, Jian Xiong, Xuebin Lu
DOI: 10.1039/D3NJ04771G
A strongly coupled 3D SnS2@Ti3C2Tx heterojunction with vacancies for high-efficiency sodium storage
DOI: 10.1039/D3NJ05137D
Cathode interface materials based on perylene-diimide derivatives for thickness insensitivity and high fill factor heterojunction organic solar cells
Lei Li, Jie Xu, Wenli Luo, Ke Zhong, Xiaohong Zhao, Yu Hu, Zhongyi Yuan, Yiwang Chen
DOI: 10.1039/D3TA04833K
Development of highly sensitive/durable porous carbon nanotube–polydimethylsiloxane sponge electrode for wearable human motion monitoring sensor
Sung-Jun Lee, Yoon-Gyung Sung, Santhia Kesavan, Chang-Lae Kim
DOI: 10.1039/D3NJ04802K
こちらもおすすめ
2-メトキシ-4-(メチルスルフィニル)アミンの主な用途は何ですか?
2-メトキシ-4-(メチルスルフィニル)アミンは、主に医薬品および農薬の製造に使用されます。また、合成化学の一部として研究用材料としても利用されます。
4,6-二氯-N-甲基ピラミジンアミンの代替品はありますか?
代替品としては、4,6-二クロロピラミジンアミンや他のピラミジン系化合物が考えられます。ただし、目的と用途によって最適な代替品は異なります。
6-氯-4-甲基-1H-吲哚を含む廃棄物はどのように処理すべきですか?
6-氯-4-甲基-1H-吲哚の廃棄物は、適切な容器に収集し、密閉して保管します。温度は常温、湿度は低く、直射日光を避けて保管することを推奨します。廃棄処理は専門...
2-フローユロ-4-(トリフルオロメチル)ベンゾイドについて「に適用される法規ガイドラインは何ですか」
2-フローユロ-4-(トリフルオロメチル)ベンゾイドのCAS番号は207974-08-1です。この化合物はGHS分類で毒性物質と有害な反応物質として分類されます...
4-ニトロフェニルN-[(ベンゼルオキシルカーボンイル]グリシングリシングリシン酸はどのように保存すればよいですか?
4-ニトロフェニルN-[(ベンゼルオキシルカーボンイル]グリシングリシングリシン酸は、室温で暗所に保管し、乾燥した環境で保存することを推奨します。容器は密閉性の...
イソデスロラタドリンの代替品はありますか?
イソデスロラタドリンの代替品としては、デスロラタドリンや他の抗ヒスタミン薬が挙げられます。具体的には、デスロラタドリン、ラセカミド、フェルタドリンなどが、症状や...
5-甲氧基-1,2,3,4-四氢异喹啉盐酸盐はどのように合成されますか?
5-甲氧基-1,2,3,4-四氢异喹啉盐酸盐の一般的な合成方法は、メタノール中で5-メトキシ-1,2,3,4-四ヒュドロイソキシンを塩酸で塩化します。この反応で...
4-アミノ-5-メトキシ-2-トルエンサルホニック酸についての法規ガイドラインは何ですか?
CAS番号6471-78-9の4-アミノ-5-メトキシ-2-トルエンサルホニック酸は、GHS分類では corrosive(腐食性)と識別されます。EUのREAC...
甲基孕酮を取り扱う際の実験室安全事項は何ですか?
甲基孕酮の取り扱いは、PPE(個人保護具)の使用が必要な重要な安全事項を伴います。防塵マスク、ゴーグル、手袋を着用することが推奨されます。ドラフトチャンバーを使...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













