Towards experimental determination of conical intersection properties: a twin state based comparison with bound excited states
文献情報
Shmuel Zilberg, Yehuda Haas
The energy and approximate structure of certain S0/S1 conical intersections (CI) are shown computationally to be deducible from those of two bound states: the first triplet (T1), which is iso-energetic with the CI, and the second excited singlet state (S2). This is demonstrated for acepentalene (I) and its perfluoro derivative (II) using the twin state concept for three states systems and based on the fact that the triplet T1 is almost degenerate with the CI. The stable S2 (C3v configuration) state exhibits unusual exaltation of Jahn–Teller active degenerate mode—νJT = 2058 cm−1 (∼500 cm−1 higher than analogous e-mode of the symmetric (C3v) T1 and the dianion I−2 or any C–C vibration of the Jahn–Teller distorted (Cs) ground state minimum). The acepentalene molecule, whose rigid structure and possibility to attain the relatively high symmetry C3v configuration, is a particularly suitable candidate for this purpose.
関連文献
Development and prospects of microfluidic platforms for sperm inspection
DOI: 10.1039/C9AY01641D
Calcium stannyl formation by organostannane dehydrogenation
Louis J. Morris, Michael S. Hill, Ian Manners, Claire L. McMullin, Mary F. Mahon, Nasir A. Rajabi
DOI: 10.1039/C9CC07289F
A differential extended gate-AlGaN/GaN HEMT sensor for real-time detection of ionic pollutants
Bin Miao, Jian Zhang, Bin Zeng, Jiadong Li
DOI: 10.1039/C9AY01019J
Voltammetric behavior of mycotoxin zearalenone at a single walled carbon nanotube screen-printed electrode
Abd-Elgawad Radi, Alsayed Eissa, Tarek Wahdan
DOI: 10.1039/C9AY01400D
A fluorescent molecular probe for the identification of zinc and cadmium salts by excited state charge transfer modulation
Kizhmuri P. Divya, Sivaraman Savithri, Ayyappanpillai Ajayaghosh
DOI: 10.1039/C4CC00379A
Quantitative analysis of toxic elements in polypropylene (PP) via laser-induced breakdown spectroscopy (LIBS) coupled with random forest regression based on variable importance (VI-RFR)
Ke Liu, Di Tian, Heyi Xu, Hongxia Wang, Guang Yang
DOI: 10.1039/C9AY01796H
Solvent pulse desorption on-line solid-phase extraction combined with high-performance liquid chromatographic determination of 14 sulfonamides in environmental water samples
Feng-Chun Hsieh, Jia-Lin Wang, Youn-Yuen Shu
DOI: 10.1039/C9AY01142K
Preparation and application of molecularly imprinted polymers for the selective extraction of naringin and genistein from herbal medicines
Zhimin Luo, Aiping Xiao, Guoning Chen, Qi Guo, Chun Chang, Aiguo Zeng, Qiang Fu
DOI: 10.1039/C9AY01503E
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














![N-[(9H-Fluoren-9-ylmethoxy)carbonyl]serine structure N-[(9H-Fluoren-9-ylmethoxy)carbonyl]serine structure](https://static.chemtradehub.com/structs/737/73724-45-5-b0dc.webp)