Voltammetric behavior of mycotoxin zearalenone at a single walled carbon nanotube screen-printed electrode
文献情報
Abd-Elgawad Radi, Alsayed Eissa, Tarek Wahdan
Zearalenone (ZEA) is a mycotoxin produced by a range of Fusarium fungi that infect cereals. ZEA may accumulate in cereals before the time of harvest. This paper describes the electrochemical behavior of zearalenone (ZEA) at a single-walled carbon nanotube screen-printed electrode (SWCNT-SPCE) using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). A single irreversible oxidation peak was observed. The DPV peak current of ZEA at a SWCNT-SPCE was noticeably enhanced due to ZEA adsorption on the electrode surface. Interestingly, the electrode showed no surface fouling by the oxidation products of ZEA and the repeated use of the electrode is feasible. The electrodeposited film was examined in an Fe(CN)63−/4− redox probe using CV and EIS measurements. A differential pulse adsorptive stripping voltammetric (DPASV) method for the determination of ZEA was developed. Under the optimized conditions, the anodic peak current of ZEA varies linearly with the ZEA concentration in the range 2.5 × 10−8 − 1.0 × 10−6 M with a detection limit (LOD) of 5.0 × 10−9 M. The method was applied for the quantitative analysis of ZEA in cornflake samples.
関連文献
C6h-Hexa-azahexaborine, [(CH)BN]6: structure and magnetic properties of a proposed 18-electron aromatic ring
A. Soncini, P. W. Fowler, I. Černušak, E. Steiner
DOI: 10.1039/B103929F
Investigation of guanine-rich DNA telomeric structure by a covalently linked BODIPY dye
DOI: 10.1039/A901361J
The structure of zeolite Na-MAP: Aiding Rietveld refinement by density functional calculations
Jörg-Rüdiger Hill, John A. Stuart, Alan R. Minihan, Erich Wimmer, Chris J. Adams
DOI: 10.1039/B003770M
Ab initio calculation of experimental structure factors for Ni(NH3)4(NO2)2
DOI: 10.1039/B003222K
Nearside-farside analysis of differential cross sections: The reaction I + HI → IH + I
C. Noli, J. N. L. Connor, N. Rougeau, C. Kubach
DOI: 10.1039/B104099P
Ab initio and kinetic calculations for the reactions of H with SiH(4−n)Fn (n = 1–3)
Qingzhu Zhang, Shaokun Wang, Chunsheng Wang, Yueshu Gu
DOI: 10.1039/B104107J
Study of the isomerization of 13C labelled methylpentanes on oxygen modified bulk tungsten carbides
V. Keller, F. Garin, G. Maire
DOI: 10.1039/B000635L
Adsorption and diffusion of repulsively interacting particles on a triangular lattice
F. Nieto, A. A. Tarasenko
DOI: 10.1039/B002575P
Hydride shift in substituted phenyl glyoxals: Interpretation of experimental rate data using electronic structure and variational transition state theory calculations
Gary Tresadern, Julie Willis, Ian H. Hillier, C. Ian F. Watt
DOI: 10.1039/B102330F
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Analytical Methods

Analytical Methods welcomes early applications of new analytical and bioanalytical methods and technology demonstrating the potential for societal impact. We require that methods and technology reported in the journal are sufficiently innovative, robust, accurate, and compared to other available methods for the intended application. Developments with interdisciplinary approaches are particularly welcome. Systems should be proven with suitably complex and analytically challenging samples. We encourage developments within, but not limited to, the following technologies and applications: global health, point-of-care and molecular diagnostics biosensors and bioengineering drug development and pharmaceutical analysis applied microfluidics and nanotechnology omics studies, such as proteomics, metabolomics or glycomics environmental, agricultural and food science neuroscience biochemical and clinical analysis forensic analysis industrial process and method development












![N-[(9H-Fluoren-9-ylmethoxy)carbonyl]serine structure N-[(9H-Fluoren-9-ylmethoxy)carbonyl]serine structure](https://static.chemtradehub.com/structs/737/73724-45-5-b0dc.webp)

