Molecular simulation of hydrogen adsorption in graphitic nanofibres
文献情報
Rodriguez, Baker and co-workers (A. Chambers, C. Park, R. T. K. Baker and N. M. Rodriguez, J. Phys. Chem. B, 1998, 102, 4253; C. Park, C. D. Tan, R. Hidalgo, R. T. K. Baker and N. M. Rodriguez, Proc. 1998 US DOE Hydrogen Program Reiew, (http://www.eren.doe.gov/hydrogen/docs/25315toc.html); C. Park, P. E. Anderson, A. Chambers, C. D. Tan, R. Hidalgo and N. M. Rodriguez, J. Phys. Chem. B, 1999, 103, 10572) have reported uptake of hydrogen in graphitic nanofibres (GNFs) of 40% by weight. If these results are confirmed, then this class of material could be a suitable storage medium for hydrogen for use in fuel cell vehicles. In order to test whether these results are feasible, we report results for grand canonical Monte Carlo simulation of hydrogen adsorption in graphitic pores. A classical technique was employed but the results obtained were shown to be consistent with previous path integral Monte Carlo calculations of Wang and Johnson (Q. Wang and J. K. Johnson, J. Chem. Phys., 1999, 110, 577; Q. Wang and J. K. Johnson, J. Phys. Chem. B, 1999, 103, 277). The interaction between hydrogen and the graphitic surface was modelled initially by dispersion forces. The predicted uptake (up to 1.5%) was much lower than the Baker–Rodriguez results. The results were found to be fairly insensitive as to whether the hydrogen molecule was modelled as a Lennard-Jones sphere or a dumbbell fluid with two Lennard-Jones sites. Two models for a hypothetical potential for chemisorption were also used in the simulation. The potential was based on calculation of the interaction between atomic hydrogen and a graphitic surface. Adsorption of up to 17 wt.% was measured with the stronger model potential but there was negligible desorption at ambient pressure, making it impractical. A more plausible, though still hypothetical, potential gave loadings of up to 8 wt.% in the model system. These results are still much lower than the Baker–Rodriguez data in spite of the fact that there is no evidence to suggest that chemisorption actually occurs in a real system.
おすすめジャーナル

Colloid Journal

Biocatalysis and Biotransformation

Topics in Catalysis

Chinese Journal of Chemistry

Medicinal Chemistry Research

Polycyclic Aromatic Compounds

Critical Reviews in Solid State and Materials Sciences

Main Group Chemistry

Acta Metallurgica Sinica-English Letters

Bioorganic & Medicinal Chemistry Letters
関連文献
Reversible fluorescence modulation through energy transfer with ABC triblock copolymer micelles as scaffolds
Jian Chen, Fang Zeng, Shuizhu Wu, Jianqing Zhao, Qiming Chen, Zhen Tong
DOI: 10.1039/B810677K
Synthesis, characterization and oxidizing properties of a diorgano tellurone carrying bulky aromatic substituents
Makoto Oba, Yasunori Okada, Kozaburo Nishiyama, Shigeru Shimada, Wataru Ando
DOI: 10.1039/B811112J
A genetic selection system for evolving enantioselectivity of enzymes
Manfred T. Reetz, Horst Höbenreich, Pankaj Soni, Layla Fernández
DOI: 10.1039/B814538E
Ruthenium polypyridyl peptide conjugates: membrane permeable probes for cellular imaging
Ute Neugebauer, Yann Pellegrin, Marc Devocelle, William Signac, Niamh Moran
DOI: 10.1039/B810403D
Highly enantioselective carbon–carbon bond formation by Cu-catalyzed asymmetric [2,3]-sigmatropic rearrangement: application to the syntheses of seven-membered oxacycles and six-membered carbocycles
Gullapalli Kumaraswamy, Kadivendi Sadaiah, Duggirala Subrahmanya Ramakrishna, Naresh Police, Balasubramanian Sridhar, Jagadeesh Bharatam
DOI: 10.1039/B810770J
Highly enantio- and diastereoselective organocatalytic cascade aza-Michael–Michael reactions: a direct method for the synthesis of trisubstituted chiral pyrrolidines
Hao Li, Liansuo Zu, Hexin Xie, Jian Wang, Wei Wang
DOI: 10.1039/B812464G
Interaction of lithium hydride and ammonia borane in THF
Yong Shen Chua, Guotao Wu, Weiliang Xu, Wendy Shaw, Abhi Karkamkar, John Linehan, Tricia Smurthwaite, Thomas Autrey
DOI: 10.1039/B812576G
Binding enhancement of antigen-functionalized PEGylated gold nanoparticles onto antibody-immobilized surface by increasing the functionalized antigen using α-sulfanyl-ω-amino-PEG
Yuki Hoshino, Takehiko Ishii
DOI: 10.1039/B811818C
Greatly reduced amino acid alphabets in directed evolution: making the right choice for saturation mutagenesis at homologous enzyme positions
Manfred T. Reetz, Sheng Wu
DOI: 10.1039/B813388C
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.




