153Sm-labeled Fe3O4@lapatinib nanoparticles as a potential therapeutic agent for breast cancer: synthesis, quality control, and in vivo evaluation
文献情報
Thanh Minh Pham, Dong Vu Cao, Ho Hong Quang Dang, Phuoc Minh Thanh Mai, Thanh Binh Nguyen, Ngoc Bao Nam Dinh, Thi Khanh Giang Nguyen, Thi Mai Huong Le, Van Dat Doan, Duc Thuan Nguyen
The present study introduces Fe3O4-coated lapatinib-labeled 153Sm nanoparticles (denoted as Fe3O4@lapatinib-153Sm) as a promising avenue for advancing breast cancer treatment. The radiolabeled nanoparticles combine various attributes, offering enhanced therapeutic precision. The integration of lapatinib confers therapeutic effects and targeted delivery. The inherent magnetic characteristics of Fe3O4 nanoparticles contribute to improved imaging contrast and targeted localization. Incorporating the gamma-emitting 153Sm isotope permits single-photon emission computed tomography imaging and radiation dose evaluation, while its beta-emitting nature ensures targeted cancer cell eradication. The synthesis of Fe3O4@lapatinib-153Sm was meticulously optimized by investigating the effects of parameters on radiolabeling efficiency. Physicochemical attributes were scrutinized using several analytical techniques. In-depth in vivo assessment evaluated the biocompatibility, toxicity, and biodistribution in a murine model, illuminating clinical utility. Optimal conditions (153SmCl3 concentration of 10 mCi mL−1, pH 7.4, a reaction time of 30 min, and a temperature of 25 °C) achieved >99% labeling efficiency and radiochemical purity. The TEM analysis indicated that the diameter of Fe3O4@lapatinib-153Sm nanoparticles ranged from 10 to 40 nm. Vibrating-sample magnetometry verified their superparamagnetic behaviour with a saturation magnetization of 41.4 emu g−1. The synthesized radiopharmaceutical exhibited high sterility and in vitro stability. Acute toxicity studies showed the mild effects of Fe3O4@lapatinib-153Sm at a dose of 20 mCi kg−1, with no observed mortality. Notably, lesions from Fe3O4@lapatinib-153Sm use recovered naturally over time. Radiation doses below 20 mCi kg−1 were recommended for clinical trials. The biodistribution study in BT474 xenograft mice revealed rapid clearance of Fe3O4@lapatinib-153Sm within 48 h. Significant accumulation occurred in the liver, spleen, and tumor tissue, while minimal accumulation was found in other tissues. Future steps involve studying biocorona formation and therapeutic efficacy on tumour models, refining its clinical potential.
関連文献
Optimization of the RAFT polymerization conditions for the in situ formation of nano-objects via dispersion polymerization in alcoholic medium
Wei Zhao, Guillaume Gody, Siming Dong, Per B. Zetterlund
DOI: 10.1039/C4PY00855C
Correction: Synergistic effects of hydrophobicity and gas barrier properties on the anticorrosion property of PMMA nanocomposite coatings embedded with graphene nanosheets
Kung-Chin Chang, Wei-Fu Ji, Mei-Chun Lai, You-Rong Hsiao, Chien-Hua Hsu, Tsao-Li Chuang, Yen Wei, Jui-Ming Yeh, Wei-Ren Liu
DOI: 10.1039/C4PY90078B
Branched polythiophenes by Ni-catalyzed Kumada coupling
Martin Scheuble, Thomas V. Richter, Miriam Goll, Steffen Link, Juan T. López Navarrete, Adrian Ruff, M. Carmen Ruiz Delgado, Sabine Ludwigs
DOI: 10.1039/C4PY00899E
Nonvolatile transistor memory devices based on high-k electrets of polyimide/TiO2 hybrids
Ying-Hsuan Chou, Chia-Liang Tsai, Guey-Sheng Liou
DOI: 10.1039/C4PY00825A
Synthesis of highly reactive polyisobutylene with FeCl3/ether complexes in hexane; kinetic and mechanistic studies
Rajeev Kumar, Priyadarsi De, Bin Zheng, Kuo-Wei Huang, Jack Emert, Rudolf Faust
DOI: 10.1039/C4PY01039F
Suzuki–Miyaura catalyst-transfer polycondensation with Pd(IPr)(OAc)2 as the catalyst for the controlled synthesis of polyfluorenes and polythiophenes
Xincui Shi, Hongkun Tian, Yanhou Geng, Fosong Wang
DOI: 10.1039/C4PY00917G
Design of polyhedral oligomeric silsesquioxane (POSS) based thermo-responsive amphiphilic hybrid copolymers for thermally denatured protein protection applications
Zibiao Li, Beng H. Tan, Guorui Jin, Kai Li
DOI: 10.1039/C4PY00936C
Dual stimuli-responsive supramolecular hydrogel of bionanoparticles and hyaluronan
Limin Chen, Xia Zhao, Yuan Lin, Zhaohui Su
DOI: 10.1039/C4PY00819G
Synthesis and properties of CO2-switchable Dex-g-PAHMA copolymers
Hongliang Kang, Ruigang Liu, Zhuang Li, Xiaozhong Qu
DOI: 10.1039/C4PY00987H
A side-chain engineering approach to solvent-resistant semiconducting polymer thin films
Zi-Hao Guo, Na Ai, Connor Ryan McBroom, Yen-Hao Lin, Michael Roders, Congzhi Zhu, Alexander L. Ayzner, Jian Pei
DOI: 10.1039/C5PY01669J
こちらもおすすめ
3-(5-フェニル-2-ファイル)-プロパン酸の市場動向や研究トレンドはどうですか?
この化合物の市場動向は不明ですが、類似化合物の需要は化学繊維、医薬品、農薬分野で安定しています。研究トレンドとしては、該当化合物の生物学的活性の評価や、その他の...
3- Chloro-1H-indazol-5-olはどのように保存すればよいですか?
3- チロロ-1H-吲唑-5-醇は遮光し、直射日光を避けて、温度は室温を推奨し、密閉容器に保存してください。
L-(1-~13~C)メチオニンの市場動向や研究トレンドはどうですか?
L-(1-~13~C)メチオニンは、医薬品やバイオテクノロジー分野での研究が増加しており、その価格は安定しています。新興研究分野では、代謝解析や遺伝子機能解析で...
1,3-フェニレンビスメチレンビスアクリレートは安全ですか?
1,3-フェニレンビスメチレンビスアクリレートは一般的に安全ですが、直接皮膚に触れる場合は保護用具を使用することを推奨します。高濃度の蒸気が吸入された場合は呼吸...
丹参醇Aはどのように保存すればよいですか?
丹参醇Aは、直射日光を避けて室温で保存し、密栓容器に入れることをお勧めします。適切な保存条件は、安定性を保ち、安全性を確保する上で重要です。
4-メチル-2-(1,1,1-三フロロ-2-メチルプロパニル)ピリドインとは何ですか?
CAS番号1378865-93-0の4-メチル-2-(1,1,1-三フロロ-2-メチルプロパニル)ピリドインは、合成化学分野で用いられる有機化合物の一種です。こ...
N-フェニルベンジル-2-クロロ酢氨を取り扱う際の実験室安全事項は何ですか?
N-フェニルベンジル-2-クロロ酢氨は毒性があり、皮膚や粘膜に刺激を与えます。取り扱う際には、保護眼鏡、手袋、ゴーグルを着用することを強く推奨します。ドラフトチ...
UCN-02を取り扱う際の実験室安全事項は何ですか?
UCN-02は毒性は低いですが、人体への直接的な接触は避けるべきです。PPE要件はグローブと顔面保護具を着用することです。ドラフトチャンバーを使用して漏洩を処理...
N-[3-[2-(二甲基氨基)乙氧基]-4-甲氧基苯基]-2'-甲基-4'-(5-甲基-1,2,4-恶二唑-3-基)-[1,1'-联苯]-4-甲酰胺を取り扱う際の実験室安全事項は何ですか?
手袋と保護眼鏡を着用し、漏洩時には吸気防止装置を使用してください。室温、乾燥した場所に保管し、直日光から隔離してください。SDS(安全データシート)を参照してく...
掲載誌
Journal of Materials Chemistry B

Journal of Materials Chemistry A, B & C cover high quality studies across all fields of materials chemistry. The journals focus on those theoretical or experimental studies that report new understanding, applications, properties and synthesis of materials. The journals have a strong history of publishing quality reports of interest to interdisciplinary communities and providing an efficient and rigorous service through peer review and publication. The journals are led by an international team of Editors-in-Chief and Associate Editors who are all active researchers in their fields. Journal of Materials Chemistry A, B & C are separated by the intended application of the material studied. Broadly, applications in energy and sustainability are of interest to Journal of Materials Chemistry A, applications in biology and medicine are of interest to Journal of Materials Chemistry B, and applications in optical, magnetic and electronic devices are of interest to Journal of Materials Chemistry C. More than one Journal of Materials Chemistry journal may be suitable for certain fields and researchers are encouraged to submit their paper to the journal that they feel best fits for their particular article. Example topic areas within the scope of Journal of Materials Chemistry B are listed below. This list is neither exhaustive nor exclusive. Antifouling coatings Biocompatible materials Bioelectronics Bioimaging Biomimetics Biomineralisation Bionics Biosensors Diagnostics Drug delivery Gene delivery Immunobiology Nanomedicine Regenerative medicine & Tissue engineering Scaffolds Soft robotics Stem cells Therapeutic devices image block All articles published in Journal of Materials Chemistry B from 2019 onwards will be indexed in MEDLINE®. Articles that primarily focus on providing insight into the underlying science and performance of biomaterials within a biological environment are more suited to our companion journal, Biomaterials Science.














