From wasted polymers to N/O co-doped partially graphitic carbon with hierarchical porous architecture as a promising cathode for high performance Zn-ion hybrid supercapacitors

文献情報

出版日 2023-11-30
DOI 10.1039/D3TA06393C
インパクトファクター 12.732
著者

Huan Liu, Xiuli Huang, Lei Ding, Yiming Ren, Zongcheng Miao, Maodong Xu


原文を見る

要旨

Zn-ion hybrid supercapacitors (ZIHSCs) inheriting the superiorities of high power and energy densities from supercapacitors and batteries are considered as a prospective competitor in renewable energy storage systems. However, their development suffers from the impediments of sluggish reaction kinetics and inadequacy of cathode materials. The conversion of recycled carbon precursors into low cost porous carbon-based cathodes is a wise strategy to pursue high performance ZIHSCs. Herein, a N/O co-doped partially graphitic carbon with hierarchical porous scaffolding architecture is constructed via an effective and scalable method by using wasted polymers of spent disposable blue nitrile gloves as a carbon source. The coordination of these features affords extensive active sites for charge capture and a rapid mass/charge transfer route for fast kinetics, thus bringing out high electrochemical performance for the aqueous ZIHSC device (an ultrahigh specific capacity of 257.9 mA h g−1 at 0.1 A g−1 with a significant capacity retention of 117.4 mA h g−1 at 50 A g−1, marvelous energy and power densities of 226.5 W h kg−1 and 47.1 kW kg−1, and a reliable cyclability of 97.8% after 15 000 cycles at a high current density of 20 A g−1). Importantly, the as-assembled quasi-solid ZIHSC device also displays superb Zn2+ storage capability of 219.0 mA h g−1 at 0.1 A g−1 with a capacity conservation of 61.2 mA h g−1 at 20 A g−1 and a high energy density of 186.7 W h kg−1, together with low self-discharge and good mechanical flexibility. These data in this work indicate the rational design of advanced carbon materials from wasted carbon sources can turn trash into treasure in the energy storage field.

関連文献

Correlations of nanoscale film morphologies and topological confinement of three-armed cage block copolymers

Brian J. Ree, Yusuke Satoh, Takuya Isono, Toshifumi Satoh

2021-05-25 Paper

DOI: 10.1039/D1PY00421B

A pillar[5]arene-based 3D polymer network for efficient iodine capture in aqueous solution

Jiajun Cao, Huangtianzhi Zhu, Liqing Shangguan, Yuezhou Liu, Peiren Liu, Qi Li, Yitao Wu

2021-05-27 Communication

DOI: 10.1039/D1PY00535A

Toughened PLA-b-PCL-b-PLA triblock copolymer based biomaterials: effect of self-assembled nanostructure and stereocomplexation on the mechanical properties

Neha Mulchandani, Kazunari Masutani, Sachin Kumar, Hideki Yamane, Yoshiharu Kimura, Vimal Katiyar

2021-06-18 Paper

DOI: 10.1039/D1PY00429H

Nitroreductase-responsive polymeric micelles based on 4-nitrobenzyl and AIE moieties for intracellular doxorubicin release

Xue-Yi Sun, Ya-Xuan Liang, Cheng-Yan Wu, Quan Tang, Rui Liu, Zhong-Lin Lu, Lan He

2021-04-05 Paper

DOI: 10.1039/D1PY00232E

Introducing a 1,1-diphenylethylene analogue for vinylpyridine: anionic copolymerisation of 3-(1-phenylvinyl)pyridine (m-PyPE)

Marcel Fickenscher, Tom Reimers, Holger Frey

2021-05-31 Paper

DOI: 10.1039/D1PY00302J

Regulation of tectonic sequences in chain-folding-directed monodisperse isomeric oligomers precisely tailored by Ugi-hydrosilylation orthogonal cycles

Chao Li, Li Han, Xiping Chen, Xinyu Bao, Qi Sun, Hongwei Ma, Yang Li

2021-05-25 Communication

DOI: 10.1039/D1PY00416F

Facile construction of noncovalent graft copolymers with triple stimuli-responsiveness for triggered drug delivery

Lei Xu, Hairong Wang, Hongrui Tian, Mingzu Zhang, Jinlin He, Peihong Ni

2021-03-12 Paper

DOI: 10.1039/D1PY00135C

Back cover

2021-04-13 Cover

DOI: 10.1039/D1PY90053F

こちらもおすすめ

化合物よくある質問

噻奈普汀乙酯の物理化学的性質は何ですか?

CAS番号66981-77-9の噻奈普汀乙酯は、結晶性白色粉末であり、分子量は476.9 g/molです。この化合物は水に溶けにくく、一般的には有機溶媒で溶解し...

66981-77-9Ethyl 7-[(3-chloro-6...
化合物よくある質問

アミピシリン不純物Fとは何ですか?

アミピシリン不純物Fは、CAS番号124774-48-7の化合物です。これは、抗生物質アミピシリンの生産過程で生成される不純物の一つであり、(4S)-2-({[...

124774-48-7Ampicillin impurity ...
化合物よくある質問

イリジウム(I)ヘキサフルオロフォスファートの代替品はありますか?

イリジウム(I)ヘキサフルオロフォスファートの代替品として、他の有機金属化合物や非有機金属化合物が使用されることがあります。具体的には、ダイゾニウム塩や他の金属...

870077-94-43-Di-i-propylphosphi...
化合物よくある質問

含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物はどのように処理すべきですか?

含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物は、安全な方法で処理する必要があります。まず、廃棄物を適切な容器に収集し、避けて保管します。次に、専門の廃棄処理業者...

912569-68-74,4,5,5-Tetramethyl-...
化合物よくある質問

2-甲基辛-1-醇を取り扱う際の実験室安全事項は何ですか?

取り扱う際は、密閉のゴーグルと手袋を着用することが推奨されます。ドラフトチャンバーを使用し、漏洩時には速やかに取り扱いを中止し、適切な排気設備を使用してください...

818-81-52-Methyl-1-octanol
化合物よくある質問

高氯酸钪の代替品はありますか?

高氯酸钪の代替品としては、沈殿剤としてのアルミニウム塩や鉄塩が挙げられます。また、沈殿反応を促進するための助剤としては、硫酸や硝酸が使用されます。

14066-05-8Scandium triperchlor...
化合物よくある質問

3α-アセトキノイドコレステロールエステルはどのように保存すればよいですか?

3α-アセトキノイドコレステロールエステルは、常温から低温(0-5℃)の暗所で保存し、密閉容器に入れることで安定性を保つことが推奨されます。また、湿気や酸素から...

30365-63-0Methyl (3alpha,5beta...
化合物よくある質問

2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸の主な用途は何ですか?

2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸は、化学合成の触媒としての使用や、医薬品の合成材料としての役割があります。また、特定の合成路線で使用...

1701435-39-3[2-(Benzyloxy)-4-(tr...
化合物よくある質問

(2S,3R)-2-氨基-3-甲基丁二酸はどのように合成されますか?

(2S,3R)-2-氨基-3-甲基丁二酸は、2-ヒドロキシ-3-メチル丁酸とアミノ化反応を行うことで合成されます。触媒としてジクロロメタンが使用され、選択性と収...

121570-10-3(2S,3R)-2-amino-3-me...
化合物よくある質問

1-Benzyl-2-phenyl-1H-imidazoleはどのように保存すればよいですか?

この化合物は常温で避けてください。直射日光を避け、密閉容器で保存し、湿気を防水の容器に入れて保管してください。

37734-89-71-Benzyl-2-phenyl-1H...

掲載誌

Journal of Materials Chemistry A

Journal of Materials Chemistry A
CiteScore: 19.5
自己引用率: 4.7%
年間論文数: 2211

Journal of Materials Chemistry A, B & C cover high quality studies across all fields of materials chemistry. The journals focus on those theoretical or experimental studies that report new understanding, applications, properties and synthesis of materials. The journals have a strong history of publishing quality reports of interest to interdisciplinary communities and providing an efficient and rigorous service through peer review and publication. The journals are led by an international team of Editors-in-Chief and Associate Editors who are all active researchers in their fields. Journal of Materials Chemistry A, B & C are separated by the intended application of the material studied. Broadly, applications in energy and sustainability are of interest to Journal of Materials Chemistry A, applications in biology and medicine are of interest to Journal of Materials Chemistry B, and applications in optical, magnetic and electronic devices are of interest to Journal of Materials Chemistry C. More than one Journal of Materials Chemistry journal may be suitable for certain fields and researchers are encouraged to submit their paper to the journal that they feel best fits for their particular article. Example topic areas within the scope of Journal of Materials Chemistry A are listed below. This list is neither exhaustive nor exclusive. Artificial photosynthesis Batteries Carbon dioxide conversion Catalysis Fuel cells Gas capture/separation/storage Green/sustainable materials Hydrogen generation Hydrogen storage Photocatalysis Photovoltaics Self-cleaning materials Self-healing materials Sensors Supercapacitors Thermoelectrics Water splitting Water treatment

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。