α-Ag2S nanoparticles: low-temperature syntheses, crystallisation pathway, and first operando luminescence measurements for sodium-ion battery applications
文献情報
J. Ströh, L. Ohrt, A. Harder, Y. Collette, L. Liers, D. Novikov, A. Khadiev, C. L. Teske
Ag2S nanoparticles (NPs) are attractive materials for wide application in catalysis, solar cells, and energy storage, owing to their low toxicity, tunable electronic properties, narrow bandgap, and light emission. However, in situ and operando studies are required for a deeper understanding of the crystallisation pathways that govern their structural-related properties and changes during operation, for example, during galvanostatic discharge–charge (GDC) in sodium-ion batteries (SIBs), to improve their cycling performance. This work presents new strategies for the synthesis of α-Ag2S NPs applying aqueous or polyol-assisted methods, and using double- or single-source based approaches. Double-source polyol synthesis was used to demonstrate the effect of reaction time, capping agent, and reaction temperature on the Ag2S particle size. Insights into Ag2S formation processes were obtained by in situ analysis of changes in turbidity and of infrared or UV/vis transmittance spectroscopy, in addition to synchrotron-based X-ray diffraction. After testing the application of Ag2S NPs as SIB electrodes, a proof-of-principle experiment is presented, demonstrating the feasibility of measuring operando luminescence spectra to monitor changes in the electrode structure during GDC cycling. The in situ results showed the influence of synthesis parameters on the nucleation process, resulting in compact and hollow NPs of ∼5–400 nm. Ag2S NPs showed an initial capacity of 520 mA h g−1 in SIBs. Despite an expected large capacity loss due to e.g. the solid electrolyte interphase (SEI) formation, the capacity was found to be stable, and operando luminescence measurements indicated the formation of Na(Ag3S2) and elemental Ag during cycling. Since several battery-electrode materials are optically active, operando luminescence measurements during cycling significantly impact the monitoring of structural changes owing to their high availability and independence from synchrotron radiation.
関連文献
Facile synthesis of novel poly(α-aminonitrile) networks through one-pot Strecker reactions
Jiacheng Wang, Yoichi Masui, Makoto Onaka
DOI: 10.1039/C2PY00002D
Synthesis of microporous polymers by Friedel–Crafts reaction of 1-bromoadamantane with aromatic compounds and their surface modification
Ho Lim, Min Chul Cha, Ji Young Chang
DOI: 10.1039/C2PY00511E
Modular oxime functionalization of well-defined alkoxyamine-containing polymers
Soma Mukherjee, Philip J. Costanzo
DOI: 10.1039/C1PY00451D
Influence of polymer conformations on the aggregation behaviour of alternating dialkylsilylene-[4,4′-divinyl(cyanostilbene)] copolymers
Chih-Hsien Chen, Shern-Long Lee, Tsong-Shin Lim, Chun-hsien Chen, Tien-Yau Luh
DOI: 10.1039/C1PY00259G
Design and preparation of porous polybenzoxazole films using the tert-butoxycarbonyl group as a pore generator and their application for patternable low-k materials
Takahiro Fukumaru, Tsuyohiko Fujigaya
DOI: 10.1039/C1PY00470K
Temperature-sensitive nanogels: poly(N-vinylcaprolactam) versus poly(N-isopropylacrylamide)
Jose Ramos, Ainara Imaz, Jacqueline Forcada
DOI: 10.1039/C2PY00485B
From a benzodiazaborole-based compound to donor–acceptor polymervia electropolymerization
Shotaro Hayashi, Toshio Koizumi
DOI: 10.1039/C2PY00563H
ω-Dimethyl ammonium tetrakis-pentafluorophenyl borate polyisoprene as an organic template for alkylated metallocenes toward the synthesis of polyethylene beads
DOI: 10.1039/C2PY00588C
An isoindigo and dithieno[3,2-b:2′,3′-d]silole copolymer for polymer solar cells
Romain Stalder, Caroline Grand, Jegadesan Subbiah, Franky So, John R. Reynolds
DOI: 10.1039/C1PY00402F
Hyperbranched polyethylenes by chain walking polymerization: synthesis, properties, functionalization, and applications
Zhongmin Dong, Zhibin Ye
DOI: 10.1039/C1PY00368B
こちらもおすすめ
N-乙酰基-L-精氨酸はどのように合成されますか?
N-乙酰基-L-精氨酸は、L-精氨酸をエタノールと酸化アクリル酸で反応させて得られます。この合成過程では、酸化アクリル酸がL-精氨酸のN-アミノグループに結合す...
カウウェルパリミタートを含む廃棄物はどのように処理すべきですか?
カウウェルパリミタートの廃棄物は、化学廃棄物として適切に収集し、専門的な廃棄処理業者に委託します。処理には、有害物質の除去と環境への影響最小化が重要です。温度は...
タテライル1,4,8,11-テトラエチルアセートの代替品はありますか?
タテライル1,4,8,11-テトラエチルアセートの代替品として、他のエチルエステル化合物や、有機窒素化合物が考えられます。ただし、代替品の選択は目的や使用条件に...
異丁卡因を取り扱う際の実験室安全事項は何ですか?
異丁卡因は毒性があり、皮膚や目を刺激する可能性があります。作業中は保護目鏡、防護手袋、防護マスクを使用し、ドラフトチャンバーで扱うべきです。漏えいした場合、その...
4-氯-2-丙基吡啶を取り扱う際の実験室安全事項は何ですか?
4-氯-2-丙基吡啶は有毒で、吸入や皮膚接触を避けることが重要です。PPEとしてゴーグル、マスク、長袖のガウン、手袋を使用し、ドラフトチャンバーを用いて操作しま...
9,10-脱水阿霉素について適用される法規ガイドラインは何ですか?
CAS番号80996-23-2の9,10-脱水阿霉素は、GHS分類においては第3類毒性物質に分類され、REACH規則においてはカテゴリー1の急性毒性物質とされて...
4-(3-溴苯基)噻唑-2-甲酸の物理化学的性質は何ですか?
4-(3-溴苯基)噻唑-2-甲酸の分子量は265.01です。この化合物は水に微溶です。反応性は中程度で、酸性やアルカリ性の条件下で分解する可能性があります。
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩はどの業界で使用されていますか?
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩は、医薬業界、ポリマー業界、センサー業界、半導体業界などで使用されています。この化合物は薬物開発の一部として...
氮卓斯汀杂质Eを取り扱う際の実験室安全事項は何ですか?
氮卓斯汀杂质E(CAS番号: 20526-97-0)を扱う際は、ゴーグルとシールド付きの手袋を使用し、漏洩がある場合はドラフトチャンバーを使用して処理することを...
デシシボチル-n-ブチルボルテゾミブはどのように保存すればよいですか?
デシシボチル-n-ブチルボルテゾミブは室温で保管し、直日光から遠ざけて密栓容器に保管することが推奨されます。
掲載誌
New Journal of Chemistry

NJC (New Journal of Chemistry) is a broad-based primary journal encompassing all branches of chemistry and its sub-disciplines. It contains full research articles, communications, perspectives and focus articles. This well-established journal, owned by the Centre National de la Recherche Scientifique (CNRS) of France, has been co-published with the Royal Society of Chemistry since January 1998. NJC is the forum for the publication of high-quality, original and significant work that opens new directions in chemistry or other scientific disciplines. In addition to having a significant chemical component, work published in NJC must demonstrate that it will have an impact on areas of research other than that of the reported work.










![4-[(2-Oxo-1,2,3,4-tetrahydroquinolin-7-yl)oxy]butanoic acid structure 4-[(2-Oxo-1,2,3,4-tetrahydroquinolin-7-yl)oxy]butanoic acid structure](https://static.chemtradehub.com/structs/588/58899-27-7-1f86.webp)


![N-[2-Bromo-4-(trifluoromethoxy)phenyl]formamide structure N-[2-Bromo-4-(trifluoromethoxy)phenyl]formamide structure](https://static.chemtradehub.com/structs/941/941294-53-7-f783.webp)
