The synthesis and combined electrical–magnetic and toxic dye sequestration properties of a Cr(iii)-metallogel
文献情報
Krishna Sundar Das, Mainak Das, Sayan Saha, Amit Adhikary, Sukhen Bala, Partha Pratim Ray, Raju Mondal
Materials based on typical inorganic compounds, along with their embodied metal-specific features like redox, magnetic, catalytic and spectroscopic properties, in their as-synthesized economical, end-user friendly and commercially viable gel states, have manifold practical and strategic advantages. Along these lines, the work presented herein aims to explore the usefulness of porous gel-based inorganic compounds, in their original as-synthesized states, for probing their combined electrical, magnetic and adsorption properties. Accordingly, we have synthesized and thoroughly characterized a benzene dicarboxylic acid based Cr(III)-metallogel for magnetic and electrical device fabrication. The metallogel shows an interesting NMOP morphology and is thoroughly characterized using various microscopic and spectroscopic techniques. Furthermore, rheological studies on the resultant metallogel reveal its interesting thixotropic behaviour. The Cr-gel has been successfully utilized for fabricating an electrical Schottky barrier diode with a befitting conductivity value of 1.61 × 10−2 S cm−1. Moreover, the free immobilized azide group, featuring in-built charge-separated resonance structures, acts as a proton carrier facilitator-cum-transporter and shows an impressive proton conductivity value of 3.3 × 10−4 S cm−1 at 95% relative humidity and 85 °C. The presence of paramagnetic chromium ions also renders a special physicochemical property, namely magnetism, to the system. The porous and magnetic nature of the as-synthesized metallogel was also evaluated. DC magnetic susceptibility data confirm the antiferromagnetic nature of the material. Gas sorption studies, on the other hand, confirm the porous nature and show the selective CO2 uptake ability of the xerogel. Subsequently, the as-synthesized, by default porous, magnetic metallogel was utilized as an adsorbent for removing toxic organic dyes like methylene blue, rhodamine B and crystal violet. Interestingly, the as-prepared metallogel also enables the substantial release of the adsorbed dye molecules for re-use. To the best of our knowledge, this kind of electrical–magnetic Cr-gel based wastewater treatment technique was not reported hitherto in the literature but has a huge potential application in adsorbent based environmental remediation as well as in magnetic or electrical device fabrication.
関連文献
High-performance asparagine-modified graphene oxide membranes for organic dyes and heavy metal ion separation
Ashique Hussain Jatoi, Ahmed Nadeem, Shah Nawaz Phulpoto, Muzaffar Iqbal, Ayaz Ali Memon, Khalid Hussain Thebo
DOI: 10.1039/D3NJ04552H
Novel and rapid approach for benzanthrone synthesis: BBr3-promoted annulation of 8-aryl-1-naphthoic acid derivatives
Xinkun An, Haoyun Ma, Guoen Cui, Tingting Zhang, Leichuan Xu, Mingan Wang
DOI: 10.1039/D3NJ03905F
Facile preparation of physically crosslinked hydrogel based on the glassy state with high strength
Qiurui Lin, Tao Rao, Xinyu Ma, Pan Du, Yuhan Liu, Die Luo, Xianru He
DOI: 10.1039/D3NJ05118H
A terbium-functionalized ZIF-8 nanosensor for rapid and sensitive detection of an anthrax spore biomarker
Xurong Zuo, Pengfei Liu, Qinhao Sun, Jiahui Huang, Yuwei Zhang, Xuecheng Zhu, Runqi Chen
DOI: 10.1039/D3NJ04760A
Visible light-mediated direct C8–H arylation of quinolines and C2–H arylation of quinoline-N-oxides and pyridines under organic photocatalysis
DOI: 10.1039/D3NJ04956F
Aquatic photolysis of strobilurin fungicide kresoxim-methyl: kinetics, pathways, and effects of adjuvants
Xuewei Zhang, Jing Ye, Zhigang Ni, Xuerui Yang, Yuefei Ji, Jean-Marc Chovelon
DOI: 10.1039/D3NJ05471C
Core–shell structured microneedles with programmed drug release functions for prolonged hyperuricemia management
Yanfang Sun, Han Wang, Amin Shavandi, Lei Nie, Khaydar E. Yunusov
DOI: 10.1039/D3TB02607H
A new era in cancer treatment: harnessing ZIF-8 nanoparticles for PD-1 inhibitor delivery
Farangis Rastin, Mahsa Akbari Oryani, Sonia Iranpour, Alireza Hashemzadeh
DOI: 10.1039/D3TB02471G
こちらもおすすめ
N-乙酰基-L-精氨酸はどのように合成されますか?
N-乙酰基-L-精氨酸は、L-精氨酸をエタノールと酸化アクリル酸で反応させて得られます。この合成過程では、酸化アクリル酸がL-精氨酸のN-アミノグループに結合す...
カウウェルパリミタートを含む廃棄物はどのように処理すべきですか?
カウウェルパリミタートの廃棄物は、化学廃棄物として適切に収集し、専門的な廃棄処理業者に委託します。処理には、有害物質の除去と環境への影響最小化が重要です。温度は...
タテライル1,4,8,11-テトラエチルアセートの代替品はありますか?
タテライル1,4,8,11-テトラエチルアセートの代替品として、他のエチルエステル化合物や、有機窒素化合物が考えられます。ただし、代替品の選択は目的や使用条件に...
異丁卡因を取り扱う際の実験室安全事項は何ですか?
異丁卡因は毒性があり、皮膚や目を刺激する可能性があります。作業中は保護目鏡、防護手袋、防護マスクを使用し、ドラフトチャンバーで扱うべきです。漏えいした場合、その...
4-氯-2-丙基吡啶を取り扱う際の実験室安全事項は何ですか?
4-氯-2-丙基吡啶は有毒で、吸入や皮膚接触を避けることが重要です。PPEとしてゴーグル、マスク、長袖のガウン、手袋を使用し、ドラフトチャンバーを用いて操作しま...
9,10-脱水阿霉素について適用される法規ガイドラインは何ですか?
CAS番号80996-23-2の9,10-脱水阿霉素は、GHS分類においては第3類毒性物質に分類され、REACH規則においてはカテゴリー1の急性毒性物質とされて...
4-(3-溴苯基)噻唑-2-甲酸の物理化学的性質は何ですか?
4-(3-溴苯基)噻唑-2-甲酸の分子量は265.01です。この化合物は水に微溶です。反応性は中程度で、酸性やアルカリ性の条件下で分解する可能性があります。
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩はどの業界で使用されていますか?
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩は、医薬業界、ポリマー業界、センサー業界、半導体業界などで使用されています。この化合物は薬物開発の一部として...
氮卓斯汀杂质Eを取り扱う際の実験室安全事項は何ですか?
氮卓斯汀杂质E(CAS番号: 20526-97-0)を扱う際は、ゴーグルとシールド付きの手袋を使用し、漏洩がある場合はドラフトチャンバーを使用して処理することを...
デシシボチル-n-ブチルボルテゾミブはどのように保存すればよいですか?
デシシボチル-n-ブチルボルテゾミブは室温で保管し、直日光から遠ざけて密栓容器に保管することが推奨されます。











![Methyl 5-iodo-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-2-thiophenecarboxylate structure Methyl 5-iodo-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-2-thiophenecarboxylate structure](https://static.chemtradehub.com/structs/100/1007171-35-8-177e.webp)



![7-Amino-5-methyl-5,7-dihydro-6H-dibenzo[b,d]azepin-6-one hydrochloride (1:1) structure 7-Amino-5-methyl-5,7-dihydro-6H-dibenzo[b,d]azepin-6-one hydrochloride (1:1) structure](https://static.chemtradehub.com/structs/209/209984-32-7-9912.webp)