Electrokinetic generation of iron-rich barriers in soils: realising the potential for nuclear site management and decommissioning
文献情報
Jamie M. Purkis, Frances Burrell, James R. Brydie, James Graham, Laurence Hopkinson, Andrew B. Cundy
Following earlier field-scale pilot work on nuclear site materials in the late 2000s, there has recently been renewed research and industry interest in the application of electrokinetic technologies for nuclear site management and remediation in the UK. One relatively novel application of electrokinetics is the use of sacrificial steel electrodes (coupled with an in situ generated pH–Eh gradient in the treated material) to precipitate sub-surface iron-rich barriers for groundwater and/or leachate containment, which could be used to grout or contain contaminated fluids in the sub-surface on working nuclear sites or sites undergoing decommissioning. Here, we report previously unpublished data from two work programmes exploring the higher Technology Readiness Level (TRL) application of this electrokinetic iron-barrier approach to materials typical of those found in the subsurface of the Sellafield nuclear licensed site, UK. The first programme, funded by the UK National Nuclear Laboratory (NNL), assessed the electrokinetic generation of iron-rich barriers at metre + scale in simulated Sellafield materials, while the second programme, funded under the current UK TRANSCEND consortium project, examined electrokinetic iron-barrier formation at smaller (<1 m) scale, but in real site materials. Both programmes indicate that iron-rich barriers can be conveniently and electrokinetically grown in different geometries over reasonable timescales (months) in realistic site subsurface materials (sands), in electrolytes similar to natural waters found in the environment. Voltage requirements are low (<1 V cm−1) with energy and consumables costs of no more than single-digit or tens of US dollars at the metre-plus scale. Further work is needed however to assess the longevity of the iron precipitates forming the subsurface barrier, and to explore barrier generation at the geometries and scales required for (site specific) field application.
関連文献
Describing the light intensity dependence of polymer:fullerene solar cells using an adapted Shockley diode model
L. H. Slooff, J. M. Kroon, W. Verhees, L. J. A. Koster, Y. Galagan
DOI: 10.1039/C3CP55293D
Development and understanding of cobaloxime activity through electrochemical molecular catalyst screening
David W. Wakerley, Erwin Reisner
DOI: 10.1039/C4CP00453A
Understanding the photothermal heating effect in non-lamellar liquid crystalline systems, and the design of new mixed lipid systems for photothermal on-demand drug delivery
Wye-Khay Fong, Tracey L. Hanley, Benjamin Thierry, Adam Tilley, Nigel Kirby, Lynne J. Waddington
DOI: 10.1039/C4CP03635B
The influence of charge on the structure and dynamics of water encapsulated in reverse micelles
Animesh Patra, Trung Quan Luong, Rajib Kumar Mitra, Martina Havenith
DOI: 10.1039/C4CP00386A
Interaction of crystal water with the building block in Y2Mo3O12 and the effect of Ce3+ doping
Xiansheng Liu, Yongguang Cheng, Erjun Liang, Mingju Chao
DOI: 10.1039/C4CP00144C
Iron based photoanodes for solar fuel production
Prince Saurabh Bassi, Gurudayal, Lydia Helena Wong
DOI: 10.1039/C3CP55174A
Molecular dynamics study of the effect of alkyl chain length on melting points of [CnMIM][PF6] ionic liquids
Yong Zhang, Edward J. Maginn
DOI: 10.1039/C4CP01048E
Micropore engineering of carbonized porous aromatic framework (PAF-1) for supercapacitors application
Yanqiang Li, Soumyajit Roy, Teng Ben, Shixian Xu, Shilun Qiu
DOI: 10.1039/C4CP00550C
Probing the microenvironment of unimicelles constituted of amphiphilic hyperbranched polyethyleneimine using 1-methyl-8-oxyquinolinium betaine
Agustín S. Picco, Gustavo F. Silbestri, R. Darío Falcone, Omar Azzaroni, Marcelo Ceolín, N. Mariano Correa
DOI: 10.1039/C4CP01333F
こちらもおすすめ
1-{3-[5-(エチルカルボンイル)-2,4-ジメチル-1H-ピロロール-3-基]プロパニル}ピペリジン-4-カルボン酸について、適用される法規ガイドラインは何ですか?
この化合物はCAS番号1142209-81-1であり、GHS分類では corrosive (腐食性物質) と classified (分類物質) として指定され...
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸とは何ですか?
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸は、CAS番号656-46-2の化合物で、化学式はC8H4F2O4です。この化合物は白色の結晶性粉...
8-氯-4-色原酮の代替品はありますか?
8-氯-4-色原酮(CAS番号: 49701-11-3)の代替品には、他の色原酮類似物や、構造が似ている化合物があります。例えば、8-メチル-4-色原酮や、他の...
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートとは何ですか?
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートは、CAS番号1233243-56-5を有する化合物です。これは有...
4-叔丁基-6-氯-嘧啶に適用される法規ガイドラインは何ですか?
4-叔丁基-6-氯-嘧啶はCAS番号3435-24-3で、GHS分類では毒性物質とみなし、GHSの危険性分類が適用されます。REACH規則では登録が必要で、Eu...
維库溴铵杂质Bはどのように合成されますか?
維库溴铵杂质Bは、アンドロステンデンから始まり、一連の合成反応、包括的な選択性と高い収率で合成されます。具体的には、ブロミド化、酸化、ジマーゼ反応、アミド化など...
2-(4-氟苄基)-吡咯烷の物理化学的性質は何ですか?
CAS番号350017-04-8の2-(4-氟苄基)-吡咯烷は、結晶性の白色粉末です。分子量は199.17 g/molで、水に溶けにくいです。化学反応では比較的...
3-喹啉甲醛(2-チロール-8-エチル)は安全ですか?
3-喹啉甲醛(2-チロール-8-エチル)は一定の毒性を持つため、取扱には注意が必要です。使用する際は適切な防護具を着用し、密閉容器で保管・搬送し、直接的な接触を...
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートはどのように保存すればよいですか?
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートは、室温(25℃)以下で保存し、直射日光を避け、乾燥した環境で保管することが推奨されます。ま...












![2-Bromodibenzo[b,d]furan structure 2-Bromodibenzo[b,d]furan structure](https://static.chemtradehub.com/structs/86-/86-76-0-1814.webp)


