Integrated chemical and biochemical technology to produce biogas with a reduced ammonia content from municipal biowaste. Validating lab-scale research in a real operational environment
文献情報
Enzo Montoneri, Michalis Koutinas, Elio Padoan, Viviana Negro, Carlo Licignano, Stefano Leone, Panagiota Photiou, Michalis Kallis, Ioannis Vyrides, Freddy Liendo, Michéle Negre, Simone Solaro, Massimiliano Antonini, Davide Mainero, Anestis Vlysidis, Viktoras Konstantinidis, Dimitrios Ladakis, Sofia Maina, Apostolis Koutinas
The current paper reports the scientific, technical, environmental, economic and social impacts of two integrated chemical and biochemical processes that employed a novel virtuous biowaste cycle under real operational conditions of three industrial sites in Italy, Greece and Cyprus. The work was based on previous laboratory research pertinent to the valorisation of municipal biowastes (MBWs) as a feedstock to obtain value added soluble biobased (SBO) products. The research pointed out that the site-specific nature of MBW was the main criticality, which could potentially hinder the industrialisation of the MBW-SBO paradigm. The present work demonstrates the feasibility of a new scenario for a conventional waste treatment plan collecting and processing MBWs by anaerobic and aerobic fermentation. In essence, the virtuous biowaste cycle is realised by producing SBO from the plant MBW (process 1) and recirculating it to the MBW feed of the anaerobic fermentation reactor to reduce the ammonia content in the digestate (process 2). This mitigates the digestate's environmental impact. Life cycle sustainability assessment demonstrates that the use of SBO produced from local MBW allowed reducing the ammonia content of the digestate generated from the local anaerobic fermentation facilities in the three different countries by 21–68% as well its eutrophication potential. Process 2 allowed at least 86% OPEX cost saving compared to conventional digestate post-treatment technologies for ammonia abatement, while paying off the CAPEX cost in less than one year. Socio-economic analysis evaluated the impacts on workers and local community stakeholders, potentially stemming from the implementation of processes 1 and 2 at European level. The analysis of SBO composition and performances in each operational site investigated showed that improved performance of process 2 might be achieved by isolating the active principles in raw SBO prior to their use in process 2. Chemical and biochemical catalysis by SBO active principles in process 2 support the specific perspective.
関連文献
A novel photoelectrochemical flow cell with online mass spectrometric detection: oxidation of formic acid on a nanocrystalline TiO2 electrode
Robert Reichert, Zenonas Jusys, R. Jürgen Behm
DOI: 10.1039/C4CP03320E
Sodium uptake in cell construction and subsequent in operando electrode behaviour of Prussian blue analogues, Fe[Fe(CN)6]1−x·yH2O and FeCo(CN)6
James C. Pramudita, Siegbert Schmid, Thomas Godfrey, Thomas Whittle, Moshiul Alam, Tracey Hanley, Helen E. A. Brand, Neeraj Sharma
DOI: 10.1039/C4CP02676D
Surface defects and their impact on the electronic structure of Mo-doped CaO films: an STM and DFT study
Yi Cui, Xiang Shao, Stefano Prada, Livia Giordano, Gianfranco Pacchioni, Hans-Joachim Freund
DOI: 10.1039/C4CP01565G
Fracture mechanism of amorphous polymers at strain fields
Lan Huang, Xiaoping Yang, Xiaolong Jia, Dapeng Cao
DOI: 10.1039/C4CP03120B
Oxygen-evolving complex of photosystem II: correlating structure with spectroscopy
Ravi Pokhrel, Gary W. Brudvig
DOI: 10.1039/C4CP00493K
Aqueous solutions of tetraalkylammonium halides: ion hydration, dynamics and ion–ion interactions in light of steric effects
Debsindhu Bhowmik, Natalie Malikova, Guillaume Mériguet, Olivier Bernard, José Teixeira, Pierre Turq
DOI: 10.1039/C4CP01164C
Mechanical properties of mesoporous ceria nanoarchitectures
Thi X. T. Sayle, Beverley J. Inkson, Günter Möbus, Stephen C. Parker, Dean C. Sayle
DOI: 10.1039/C4CP03526G
Controlled synthesis, photoluminescence, and the quantum cutting mechanism of Eu3+ doped NaYbF4 nanotubes
Xiangfu Wang, Chun-sheng Liu, Tonghui Yu
DOI: 10.1039/C4CP01263A
Structure, ligands and substrate coordination of the oxygen-evolving complex of photosystem II in the S2 state: a combined EPR and DFT study
Thomas Lohmiller, Vera Krewald, Montserrat Pérez Navarro, Marius Retegan, Leonid Rapatskiy, Marc M. Nowaczyk, Alain Boussac, Frank Neese, Wolfgang Lubitz, Dimitrios A. Pantazis, Nicholas Cox
DOI: 10.1039/C3CP55017F
Enhanced photocatalytic activity of Co doped ZnO nanodisks and nanorods prepared by a facile wet chemical method
Sini Kuriakose, Biswarup Satpati, Satyabrata Mohapatra
DOI: 10.1039/C4CP01315H
こちらもおすすめ
1-{3-[5-(エチルカルボンイル)-2,4-ジメチル-1H-ピロロール-3-基]プロパニル}ピペリジン-4-カルボン酸について、適用される法規ガイドラインは何ですか?
この化合物はCAS番号1142209-81-1であり、GHS分類では corrosive (腐食性物質) と classified (分類物質) として指定され...
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸とは何ですか?
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸は、CAS番号656-46-2の化合物で、化学式はC8H4F2O4です。この化合物は白色の結晶性粉...
8-氯-4-色原酮の代替品はありますか?
8-氯-4-色原酮(CAS番号: 49701-11-3)の代替品には、他の色原酮類似物や、構造が似ている化合物があります。例えば、8-メチル-4-色原酮や、他の...
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートとは何ですか?
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートは、CAS番号1233243-56-5を有する化合物です。これは有...
4-叔丁基-6-氯-嘧啶に適用される法規ガイドラインは何ですか?
4-叔丁基-6-氯-嘧啶はCAS番号3435-24-3で、GHS分類では毒性物質とみなし、GHSの危険性分類が適用されます。REACH規則では登録が必要で、Eu...
維库溴铵杂质Bはどのように合成されますか?
維库溴铵杂质Bは、アンドロステンデンから始まり、一連の合成反応、包括的な選択性と高い収率で合成されます。具体的には、ブロミド化、酸化、ジマーゼ反応、アミド化など...
2-(4-氟苄基)-吡咯烷の物理化学的性質は何ですか?
CAS番号350017-04-8の2-(4-氟苄基)-吡咯烷は、結晶性の白色粉末です。分子量は199.17 g/molで、水に溶けにくいです。化学反応では比較的...
3-喹啉甲醛(2-チロール-8-エチル)は安全ですか?
3-喹啉甲醛(2-チロール-8-エチル)は一定の毒性を持つため、取扱には注意が必要です。使用する際は適切な防護具を着用し、密閉容器で保管・搬送し、直接的な接触を...
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートはどのように保存すればよいですか?
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートは、室温(25℃)以下で保存し、直射日光を避け、乾燥した環境で保管することが推奨されます。ま...















