Self-assembled systems for artificial photosynthesis
文献情報
Sebastiano Campagna, Francesco Nastasi, Giuseppina La Ganga, Scolastica Serroni, Antonio Santoro, Antonino Arrigo, Fausto Puntoriero
The last few decades have seen an impressive development in molecular-based artificial photosynthesis, thanks to the design of integrated light-harvesting antennae, charge separation systems, and catalysts for water oxidation or hydrogen production based on covalently linked subunits. However, in recent years, self-assembly and spontaneous aggregation of components emerged – sometimes also through serendipity – for the preparation of multicomponent systems aimed to perform the basic processes needed for artificial photosynthesis. Here we critically discuss some key articles that have recently shown the potential of self-assembly for artificial photosynthesis, ranging from self-assembly of antennae and charge separation systems to integrated antenna/catalyst assemblies, to planned co-localization of various components into restricted environments. It is evident that self-assembly can generate emerging properties with respect to the non-aggregated species, and such emerging properties can be quite convenient for designing efficient photocatalytic systems.
関連文献
All-thiophene-based conjugated porous organic polymers
Peng-Fei Wang, Hua Wang, Bao-Hang Han
DOI: 10.1039/C6PY00725B
Ring-opening polymerization of donor–acceptor cyclopropanes catalyzed by Lewis acids
Kosuke Hayakawa, Shin-ichi Matsuoka, Masato Suzuki
DOI: 10.1039/C7PY00794A
Quantitative end-group functionalization of PNIPAM from aqueous SET-LRP via in situ reduction of Cu(ii) with NaBH4
Mikhail Gavrilov, Zhongfan Jia, Virgil Percec, Michael J. Monteiro
DOI: 10.1039/C6PY00968A
Site-selective enzymatic chemistry for polymer conjugation to protein lysine residues: PEGylation of G-CSF at lysine-41
A. Mero, A. Grigoletto, K. Maso, H. Yoshioka, A. Rosato
DOI: 10.1039/C6PY01616B
A novel copper catalyst containing a hydroxyl functional group: a facile strategy to prepare block copolymers of vinyl monomer and ε-caprolactone via tandem reverse ATRP and ROP
Xiao-hui Liu, Qiu-yan Zhang, Wen-li Di, Yan-guang Zhang, Chen Ding
DOI: 10.1039/C7PY01040K
Synthesis of a glucose oxidase-conjugated, polyacrylamide-based, fluorescent hydrogel for a reusable, ratiometric glucose sensor
Ho Namgung, Taek Seung Lee
DOI: 10.1039/C6PY01120A
Synthesis and field-effect transistor properties of a diseleno[3,2-b:2′,3′-d]silole-based donor–acceptor copolymer: investigation of chalcogen effect
Yu-Chieh Pao, Cheng-Tai Yang, Yu-Ying Lai, Wen-Chia Huang, Chain-Shu Hsu, Yen-Ju Cheng
DOI: 10.1039/C6PY00765A
こちらもおすすめ
H-Leu-Ser-Lys-Leu-OH trifluoroacetate saltに適用される法規ガイドラインは何ですか?
CAS番号162559-45-7のH-Leu-Ser-Lys-Leu-OH trifluoroacetate saltは、GHS( Chemicals Clas...
Trimethyltin Chlorideの物理化学的性質は何ですか?
CAS番号1066-45-1のトリメチルチリドは、白色結晶性粉末で、分子量は297.77です。この化合物は水にわずかに溶けますが、酢酸、エタノール、ジエチルエー...
ニコール酸化物水和物の主な用途は何ですか?
ニコール酸化物水和物は、主に金属分離、研磨剤、酸化剤、染料製造の原料として利用されます。また、電気化学製品、触媒、分析化学の分野でも広く使用されています。
(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際の実験室安全事項は何ですか?
(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際は、PPE(防護服、ゴーグル、マスク、手袋)を使用する必要があります。ドラフトチャンバ...
4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは安全ですか?
4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは一般的に安全とは言えません。取扱いには注意が必要で、直接的な皮膚接触や吸入は避けてください。
4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯はどの業界で使用されていますか?
4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯は医薬業界、ポリマー業界、センサー業界、半導体業界で使用されています。特に、光触媒や蛍光材料として利用されています...
2,3,5,6-四氯-4-ピリジンスチオールを取り扱う際の実験室安全事項は何ですか?
2,3,5,6-四氯-4-ピリジンスチオールは非常に毒性があり、皮膚や粘膜に刺激を与える可能性があります。取り扱う際には、ゴーグル、ゴム手袋、防塵マスクを着用し...
TG 4-155はどのように合成されますか?
TG 4-155は、2-(2-メチル-1H-インドン-1-イル)エチルアミドと3,4,5-トリメトキシフェノールを反応させ、選択性的に合成できます。一般的には、...
エチルヒドロキシキニリン-6-カルボキシ酸は適用される法規ガイドラインは何ですか?
エチルヒドロキシキニリン-6-カルボキシ酸のCAS番号1261631-01-9は、GHS分類の第2クラスの腐食物質(皮膚に強い腐食性)に分類されます。また、EU...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













![2-Bromo-7-chloro-4H-pyrrolo[2,3-b]pyrazine structure 2-Bromo-7-chloro-4H-pyrrolo[2,3-b]pyrazine structure](https://static.chemtradehub.com/structs/115/1150617-58-5-0b0a.webp)
![4-Chloro-N-{[4-(dimethylamino)phenyl]carbamoyl}benzenesulfonamide structure 4-Chloro-N-{[4-(dimethylamino)phenyl]carbamoyl}benzenesulfonamide structure](https://static.chemtradehub.com/structs/558/5581-42-0-7dcb.webp)