Highly 2,3-selective and fast living polymerization of alkyl-, alkoxy- and phenylallenes using nickel(ii) catalysts
文献情報
Shu-Ming Kang, Xun-Hui Xu, Lei Xu, Li Zhou, Na Liu, Zong-Quan Wu
Polyallene is one of the most attractive synthetic precursors for constructing functional materials due to its unsaturated bonds on the main chain or pendants. The facile synthesis of high regioselectivity polyallenes still remains a challenge. In this work, a novel Ni(II) catalyst with a phosphine bearing sulfoxide moiety named Ming-Phos (L4) as a ligand was developed to initiate the polymerization of various allene monomers efficiently in a fast and living/controlled manner. The well-defined polyallenes were afforded in high yields with a controlled molar mass (Mn) and low molar mass distribution (Mw/Mn). Moreover, the Ni(II)/L4 catalyst exhibited fascinating regioselectivity on the accumulated double bonds of allene monomers, and the 2,3-regioselectivity of the polymerization of allene monomers was up to >99.9%. Remarkably, various monomers with different functional groups inculding alkyl, alkoxy and substituted phenyl groups could be polymerized effectively using Ni(II)/L4 as the initiator, affording polyallenes with higher 2,3-regioselectivity. The regioselectivity, and thermodynamic and crystallization properties of the polyallenes were confirmed by 1H NMR, DSC, TGA and WAXD, respectively.
関連文献
Synthesis and reactions of the first fluoroalkylated Ni(ii) N-confused porphyrins
Hua-Wei Jiang, Qing-Yun Chen, Ji-Chang Xiao, Yu-Cheng Gu
DOI: 10.1039/B811831K
Covalent surface modification of a metal–organic framework: selective surface engineering viaCuI-catalyzed Huisgen cycloaddition
Tendai Gadzikwa, Guang Lu, Charlotte L. Stern, Scott R. Wilson, Joseph T. Hupp, SonBinh T. Nguyen
DOI: 10.1039/B805101A
A genetic selection system for evolving enantioselectivity of enzymes
Manfred T. Reetz, Horst Höbenreich, Pankaj Soni, Layla Fernández
DOI: 10.1039/B814538E
Click chemistry assembly of G-quadruplex ligands incorporating a diarylurea scaffold and triazole linkers
William C. Drewe, Stephen Neidle
DOI: 10.1039/B814576H
Enhanced carbohydrate structural selectivity in ion mobility-mass spectrometry analyses by boronic acid derivatization
Larissa S. Fenn, John A. McLean
DOI: 10.1039/B810421B
Templating effect of silk fibers in the oriented deposition of aragonite
Cheng Cheng, Yuhong Yang, Xin Chen, Zhengzhong Shao
DOI: 10.1039/B810337B
Facile preparation of low cytotoxicity fluorescent carbon nanocrystals by electrooxidation of graphite
Qiao-Ling Zhao, Zhi-Ling Zhang, Bi-Hai Huang, Jun Peng, Min Zhang, Dai-Wen Pang
DOI: 10.1039/B812420E
Amino-sugar modular ligands—useful cores for the formation of asymmetric copper 1,4-addition catalysts
Antonella De Roma, Francesco Ruffo, Simon Woodward
DOI: 10.1039/B813137F
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














