Effects of temperature and grain size on deformation of polycrystalline copper–graphene nanolayered composites
文献情報
Yunlong Ma, Sen Zhang, Yunfei Xu, Xiaoyi Liu
The effects of temperature and grain size on mechanical properties of polycrystalline copper–graphene nanolayered (PCuGNL) composites are investigated by analytical mechanical models and molecular dynamics simulations. The yield of PCuGNL composites under tension depends on temperature, copper grain size, and repeat layer spacing. Graphene–copper interfaces play the dominant role in the ultimate tensile strength of PCuGNL composites. The optimal range for strengthening of repeat layer spacing is 2–10 nm, and the failure stress of PCuGNL composites is weakly dependent on temperature. An analytical model is proposed to accurately characterize the mechanical behaviors of PCuGNL composites.
関連文献
Highly efficient and stable perovskite solar cells produced by maximizing additive engineering
Linlin Qiu, Jiacheng Zou, Wei-Hsiang Chen, Lika Dong, Deqiang Mei, Jieqiong Wang, Pei-Cheng Jiang
DOI: 10.1039/D0SE01498B
Phase-controllable polymerized ionic liquids for CO2 fixation into cyclic carbonates
Chaokun Yang, Yanglin Chen, Ye Qu, Jiaxu Zhang, Jianmin Sun
DOI: 10.1039/D0SE01293A
Effect of thermal formation/dissociation cycles on the kinetics of formation and pore-scale distribution of methane hydrates in porous media: a magnetic resonance imaging study
Mehrdad Vasheghani Farahani, Xianwei Guo, Lunxiang Zhang, Mingzhao Yang, Aliakbar Hassanpouryouzband, Jiafei Zhao, Jinhai Yang, Yongchen Song, Bahman Tohidi
DOI: 10.1039/D0SE01705A
Morphologically controlled rapid fabrication of rhodium sulfide (Rh2S3) thin films for superior and robust hydrogen evolution reaction
Muhammad Ali Ehsan, Alaaldin Adam, Abdul Rehman, Abbas Saeed Hakeem, Anvarhusein A. Isab
DOI: 10.1039/D0SE01423K
An anthraquinone-decorated graphene hydrogel based on carbonized cotton fibers for flexible and high performance supercapacitors
Mengying Jia, Yue Li, Linlin Cui, Yingrui An, Canping Pan, Xiaojuan Jin
DOI: 10.1039/D0SE01424A
Ultrasonic induced mechanoacoustic effect on delignification of rice straw for cost effective biopretreatment and biomethane recovery
Yukesh Kannah R., Kavitha S., Sivashanmugam P., Gopalakrishnan Kumar, Rajesh Banu J.
DOI: 10.1039/D0SE01814G
A comparison of sizing methods for a long-term renewable hybrid system. Case study: Galapagos Islands 2031
A. Cano, Paul Arévalo, F. Jurado
DOI: 10.1039/D1SE00078K
Chicken feather fiber-based bio-piezoelectric energy harvester: an efficient green energy source for flexible electronics
Moumita Barman, Soumen Das, Ankita Das, Sampad Mukherjee, Mahmoud Tavakoli, Nillohit Mukherjee, Navonil Bose
DOI: 10.1039/D0SE01433H
こちらもおすすめ
H-Leu-Ser-Lys-Leu-OH trifluoroacetate saltに適用される法規ガイドラインは何ですか?
CAS番号162559-45-7のH-Leu-Ser-Lys-Leu-OH trifluoroacetate saltは、GHS( Chemicals Clas...
Trimethyltin Chlorideの物理化学的性質は何ですか?
CAS番号1066-45-1のトリメチルチリドは、白色結晶性粉末で、分子量は297.77です。この化合物は水にわずかに溶けますが、酢酸、エタノール、ジエチルエー...
ニコール酸化物水和物の主な用途は何ですか?
ニコール酸化物水和物は、主に金属分離、研磨剤、酸化剤、染料製造の原料として利用されます。また、電気化学製品、触媒、分析化学の分野でも広く使用されています。
(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際の実験室安全事項は何ですか?
(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際は、PPE(防護服、ゴーグル、マスク、手袋)を使用する必要があります。ドラフトチャンバ...
4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは安全ですか?
4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは一般的に安全とは言えません。取扱いには注意が必要で、直接的な皮膚接触や吸入は避けてください。
4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯はどの業界で使用されていますか?
4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯は医薬業界、ポリマー業界、センサー業界、半導体業界で使用されています。特に、光触媒や蛍光材料として利用されています...
2,3,5,6-四氯-4-ピリジンスチオールを取り扱う際の実験室安全事項は何ですか?
2,3,5,6-四氯-4-ピリジンスチオールは非常に毒性があり、皮膚や粘膜に刺激を与える可能性があります。取り扱う際には、ゴーグル、ゴム手袋、防塵マスクを着用し...
TG 4-155はどのように合成されますか?
TG 4-155は、2-(2-メチル-1H-インドン-1-イル)エチルアミドと3,4,5-トリメトキシフェノールを反応させ、選択性的に合成できます。一般的には、...
エチルヒドロキシキニリン-6-カルボキシ酸は適用される法規ガイドラインは何ですか?
エチルヒドロキシキニリン-6-カルボキシ酸のCAS番号1261631-01-9は、GHS分類の第2クラスの腐食物質(皮膚に強い腐食性)に分類されます。また、EU...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.









![2-[2-(2-Methoxyethoxy)ethoxy]-2-methylpropane structure 2-[2-(2-Methoxyethoxy)ethoxy]-2-methylpropane structure](https://static.chemtradehub.com/structs/527/52788-79-1-71c1.webp)


![methyl 6-amino-1H-pyrrolo[2,3-b]pyridine-4-carboxylate structure methyl 6-amino-1H-pyrrolo[2,3-b]pyridine-4-carboxylate structure](https://static.chemtradehub.com/structs/119/1190315-60-6-9d9a.webp)
![3-(benzotriazol-1-yl)-N-[[2-[(3-bromophenyl)methoxy]phenyl]methylideneamino]propanamide structure 3-(benzotriazol-1-yl)-N-[[2-[(3-bromophenyl)methoxy]phenyl]methylideneamino]propanamide structure](https://static.chemtradehub.com/structs/559/5595-78-8-0a32.webp)