Equivalency calculation of unknown enzyme inhibitors in situ the adsorbent of effect-directed autograms
文献情報
Ebrahim Azadniya, Gertrud E. Morlock
Reliable biochemical quantification of the enzymatically produced signals of enzyme inhibitors has recently been achieved in situ an assay-containing chromatographic bed, i.e. the adsorbent of an effect-directed autogram. As most of the enzyme inhibitors discovered in a complex sample are unknown or unidentified, external standard calibration cannot be performed, and their inhibition potency needs to be estimated by alternative means. Thus, herein, two different modes of equivalency calculation, referring to a potent inhibitor that was either applied or developed, were investigated, validated and compared, exemplarily for acetyl- and butyrylcholinesterase (AChE/BChE) inhibition zones in the Peganum harmala (P. h.) seed extract. Moreover, three potent inhibitors, i.e. physostigmine (PHY), rivastigmine and piperine, were considered for equivalency calculation. With regard to their hRF value, band shape and inhibition brightness against the plate background, the properties of PHY were most similar to those of the unidentified inhibitors in the P. h. seed extract, and thus, it was selected as a reference. The HPTLC-AChE assay with 1-naphthyl acetate as a substrate and Fast Blue B salt as a chromogenic reagent was suitable to reveal the potential differences between the two modes of equivalency calculation due to its low limits of detection. Quantification was studied via PHY zones that were applied versus developed on a high-performance thin-layer chromatography (HPTLC) plate. Both intraday precision and reproducibility showed the same trend, i.e. the equivalency calculation via the developed PHY bands was more repeatable than that via the applied PHY bands. The steeper slope of the calibration curve of the developed PHY bands offered a more sensitive quantification. The resulting equivalent inhibition of the ChE inhibitors in 1 μg per band of P. h. seed extract showed a bias of ca. 30% when calculated via the applied versus developed PHY bands, whereby the total AChE-to-BChE inhibition ratio (ca. 2.4) of the ChE inhibitors in 1 μg per band of P. h. seed extract remained almost the same. As a result, the enzyme inhibition equivalency calculated via the developed reference bands was more reliable and sensitive than that calculated via the applied reference bands. When a faster procedure (applied band pattern) is selected for routine equivalency calculation as a compromise, a potential bias has to be taken into account.
関連文献
Intrinsic magnetism and biaxial strain tuning in two-dimensional metal halides V3X8 (X = F, Cl, Br, I) from first principles and Monte Carlo simulation
Haibo Xiao, Xiaonan Wang, Ruilong Wang, Lingfang Xu, Shiheng Liang, Changping Yang
DOI: 10.1039/C9CP00850K
4He/3He separation using oxygen-functionalized nanoporous graphene
Maryam S. Motallebiour, Javad Karimi-Sabet, Ali Maghari
DOI: 10.1039/C9CP01364D
Vibrational spectroscopy of the hexahydrated sulfate dianion revisited: role of isomers and anharmonicities
Harald Knorke, Knut R. Asmis
DOI: 10.1039/C9CP01802F
Chemical pressure–chemical knowledge: squeezing bonds and lone pairs within the valence shell electron pair repulsion model
A. Lobato, H. H. Osman, M. A. Salvadó, M. Taravillo, J. M. Recio
DOI: 10.1039/C9CP00913B
Spectroscopic diagnostic for the ring-size of carbohydrates in the gas phase: furanose and pyranose forms of GalNAc
Baptiste Schindler, Laurent Legentil, Abdul-Rhaman Allouche, Vincent Ferrières
DOI: 10.1039/C8CP04082F
On-surface synthesis of 2D COFs on Cu(111) via the formation of thermodynamically stable organometallic networks as the template
Cheng-Xin Wang, Jian-Le Chen, Chen-Hui Shu, Ke-Ji Shi, Pei-Nian Liu
DOI: 10.1039/C9CP01843C
Tetrel bonding interaction: an analysis with the block-localized wavefunction (BLW) approach
Changwei Wang, Yama Aman, Xiaoxi Ji, Yirong Mo
DOI: 10.1039/C9CP01710K
Thermodynamics and kinetics of an oxygen adatom on pristine and functionalized graphene: insight gained into their anticorrosion properties
Shaoxian Zheng, Jibin Pu, Junhui Sun, Liang-Feng Huang, Liping Wang, Qunji Xue
DOI: 10.1039/C8CP07533F
Solvation structure of lanthanide(iii) bistriflimide salts in acetonitrile solution: a molecular dynamics simulation and EXAFS investigation
Valentina Migliorati, Adriano Filipponi, Francesco Sessa, Alessandra Serva, Paola D'Angelo
DOI: 10.1039/C9CP01417A
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Analytical Methods

Analytical Methods welcomes early applications of new analytical and bioanalytical methods and technology demonstrating the potential for societal impact. We require that methods and technology reported in the journal are sufficiently innovative, robust, accurate, and compared to other available methods for the intended application. Developments with interdisciplinary approaches are particularly welcome. Systems should be proven with suitably complex and analytically challenging samples. We encourage developments within, but not limited to, the following technologies and applications: global health, point-of-care and molecular diagnostics biosensors and bioengineering drug development and pharmaceutical analysis applied microfluidics and nanotechnology omics studies, such as proteomics, metabolomics or glycomics environmental, agricultural and food science neuroscience biochemical and clinical analysis forensic analysis industrial process and method development











![Sodium 3-[(E)-(4-anilinophenyl)diazenyl]benzenesulfonate structure Sodium 3-[(E)-(4-anilinophenyl)diazenyl]benzenesulfonate structure](https://static.chemtradehub.com/structs/587/587-98-4-035f.webp)


