Atom-economic synthesis of cyclobuta[a]naphthalen-4-ols via a base-promoted [2 + 2] cycloaddition/1,6-nucleophilic addition cascade
文献情報
Jia-Yin Wang, Feng-Lie Xie, Jian-Qiang Hu, Shi-Zhao Yang, You-Jian Wang, Wen-Juan Hao, Shu-Jiang Tu, Bo Jiang
A first atom-economic [2 + 2] cycloaddition/1,6-conjugate addition cascade of yne-allenones with C-nucleophiles including 1,3-dicarbonyls and α,α-dicyanoolefins under base-promoted conditions has been established, enabling the direct construction of C(sp3)–C(sp3) bonds to generate cyclobuta[a]naphthalen-1-ols with generally good yields. These resulting products have a cyclobutene unit that contains both an aryl and alkyl group.
関連文献
Helices and Sheets in vacuoThe HTML version of this article has been enhanced with colour images.
DOI: 10.1039/B612615D
Energy-directed tree search: an efficient systematic algorithm for finding the lowest energy conformation of molecules
Ekaterina I. Izgorodina, Ching Yeh Lin, Michelle L. Coote
DOI: 10.1039/B700938K
Gas-phase electronic spectrum of the C14 ring
A. E. Boguslavskiy, J. P. Maier
DOI: 10.1039/B613109C
Weak distance dependence of through-bond interactions in tetrahydro-4H-thiopyran-4-ylidene end-capped oligo(cyclohexylidenes); a computational survey
Cornelis A. van Walree, Alwin W. Marsman, Joop H. van Lenthe, Leonardus W. Jenneskens
DOI: 10.1039/B616893K
A novel approach to the micropatterning of proteins using dewetting of polymer bilayers
DOI: 10.1039/B614085H
Energy selective excision of CN− following electron attachment to hexafluoroacetone azine ((CF3)2CN–NC(CF3)2)
Ilko Bald, Iwona Dąbkowska, Eugen Illenberger, Oddur Ingólfsson
DOI: 10.1039/B702482G
Adiabatic and non-adiabatic corrections to rovibrational energies of diatomic molecules: variational calculations with experimental accuracy
DOI: 10.1039/B700044H
Effects of surface site distribution and dielectric discontinuity on the charging behavior of nanoparticles. A grand canonical Monte Carlo study
Marianne Seijo, Serge Ulrich, Montserrat Filella, Jacques Buffle, Serge Stoll
DOI: 10.1039/B612118G
こちらもおすすめ
3-イチチルビフェニルはどのように合成されますか?
3-イチチルビフェニルは、ビフェニルとイチプロピオニトリルを回収率約90%で反応させて合成されます。触媒は通常、亜リチウムホウ素を用います。
8-溴-5-三氟甲基喹啉はどのように合成されますか?
8-溴-5-三氟甲基喹啉は、5-トリフルオロメチル-2-メチル-1,3-ベンゼンジオールをブロモエタノールと反応させて生成します。この反応は塩基性条件下で行われ...
ジメチル4-(4,4,5,5-テトラメチル-1,3,2-ドioxaborolan-2-基)-2,6-ピリジンジカルボイル酸フェニルアミニドの代替品はありますか?
ジメチル4-(4,4,5,5-テトラメチル-1,3,2-ドioxaborolan-2-基)-2,6-ピリジンジカルボイル酸フェニルアミニドの代替品としては、4-...
N-(3,5-ヘキサクロロ-4-ピリドインイル)-8-メチオキシ-5-キノリンカーボン酸の市場動向や研究トレンドはどのようなものでしょうか?
N-(3,5-ヘキサクロロ-4-ピリドインイル)-8-メチオキシ-5-キノリンカーボン酸の市場動向は、主に産業用途での需要により影響を受けます。研究トレンドとし...
イソステアロイルグリセリルは安全ですか?
イソステアロイルグリセリルは一般的に安全性が高いとされていますが、過度な使用や個人差により皮�owsん炎などの反応が起こる可能性があります。使用前に医師に相談す...
1-(二苯甲基)-3,3-二氟-氮杂环丁烷の市場動向や研究トレンドはどうですか?
1-(二苯甲基)-3,3-二氟-氮杂环丁烷の市場動向は、医薬品や合成化学の研究分野で注目を集めています。新興研究は、該当化合物の合成改良と生体内での作用メカニズ...
3-チオフェンスチオールの物理化学的性質は何ですか?
3-チオフェンスチオールのCAS番号は7774-73-4です。結晶性の白色粉末で、分子量は122.17です。この化合物は水に微溶解し、エタノールやジクロロメタン...
2-Methyl-2-propanyl (2S)-2-(aminomethyl)-1-piperidinecarboxylateは安全ですか?
2-Methyl-2-propanyl (2S)-2-(aminomethyl)-1-piperidinecarboxylateは一定の安全性基準を満たしていま...
CAS番号1316822-90-8の化合物は安全ですか?
CAS番号1316822-90-8の化合物は安全性に関しては評価が不足していますが、一般的には生物学的に活性な物質であり、取り扱いには適切な安全防護措置が必要で...
Tert-butyl 2-(2-羟基乙基)哌嗪-1-羧酸はどのように保存すればよいですか?
Tert-butyl 2-(2-羟基乙基)哌嗪-1-羧酸は、冷暗所で保存し、直射日光から遠ざけてください。容器は密閉し、高湿度や高温を避けて保管してください。
掲載誌
Organic & Biomolecular Chemistry

Organic & Biomolecular Chemistry (OBC) publishes original and high impact research and reviews in organic chemistry. We welcome research that shows new or significantly improved protocols or methodologies in total synthesis, synthetic methodology or physical and theoretical organic chemistry as well as research that shows a significant advance in the organic chemistry or molecular design aspects of chemical biology, catalysis, supramolecular and macromolecular chemistry, theoretical chemistry, mechanism-oriented physical organic chemistry, medicinal chemistry or natural products. Articles published in the journal should report new work which makes a highly-significant impact in the field. Routine and incremental work is generally not suitable for publication in the journal. More details about key areas of our scope are below. In all cases authors should include in their article clear rationale for why their research has been carried out.














