Influence of humidity and iron(iii) on photodegradation of atmospheric secondary organic aerosol particles
文献情報
Kurtis T. Malecha, Markus Ammann, Sergey A. Nizkorodov
The absorption of solar actinic radiation by atmospheric secondary organic aerosol (SOA) particles drives condensed-phase photochemical processes, which lead to particle mass loss by the production of CO, CO2, hydrocarbons, and various oxygenated volatile organic compounds (OVOCs). We examined the influence of relative humidity (RH) and Fe(III) content on the OVOC release and subsequent mass loss from secondary organic aerosol material (SOM) during UV irradiation. The samples were generated in a flow tube reactor from the oxidation of D-limonene by ozone. The SOM was collected with a Micro Orifice Uniform Deposit Impactor (MOUDI) on CaF2 windows. To selected samples, a variable amount of FeCl3 was added before irradiation. The resulting SOM samples, with or without added FeCl3, were irradiated with a 305 nm light-emitting diode and the release of several OVOCs, including acetic acid, acetone, formic acid and acetaldehyde, was measured with a Proton Transfer Reaction Time-of-Flight Mass Spectrometer (PTR-ToF-MS). The release of OVOCs from photodegradation of SOM at typical ambient mid-values of RH (30–70%) was 2–4 times higher than under dry conditions. The release of OVOCs was slightly enhanced in the presence of low concentrations of iron (0.04 Fe molar ratio) but it was suppressed at higher concentrations (0.50 Fe molar ratio) of iron indicating the existence of a complicated radical chemistry driving the photodegradation of SOM. Our findings suggest that the presence of iron in atmospheric aerosol particles will either increase or decrease release of OVOCs due to the photodegradation of SOM depending on whether the relative iron concentration is low or high, respectively. At atmospherically relevant RH conditions, the expected fractional mass loss induced by these photochemical processes from limonene SOA particles would be between 2 and 4% of particle mass per hour. Therefore, photodegradation is an important aging mechanism for this type of SOA.
おすすめジャーナル
関連文献
Performance optimization of a thermoelectric generator for automotive application using an improved whale optimization algorithm
DOI: 10.1039/D3SE01202F
Constructing low-cost and high-strength ultra-low-density proppants based on the modification of activated carbon framework with in situ hydrolyzed silane
Zhen Zeng, Shiqiang Wang, Ermei Liu, Wei Qin, Yang Zhou, Zhenyong Li, Yu Song, Min Xu, Fuli Bian, Xianyan Ren
DOI: 10.1039/D3SE01311A
Constructing perfect cubic Ag–Cu alloyed nanoclusters through selective elimination of phosphine ligands
Li Tang, Qikai Han, Bin Wang, Zhonghua Yang, Chunyuan Song, Guanyu Feng, Shuxin Wang
DOI: 10.1039/D3CP04224C
Water dynamics in eutectic solutions of sodium chloride and magnesium sulfate: implications for life in Europa's subsurface ocean and ice shell
Daniel Sieme
DOI: 10.1039/D3CP03455K
A self-phosphorized carbon-based monolithic chainmail electrode for high-current-density and durable alkaline water splitting
DOI: 10.1039/D3SE01486J
Highly efficient hydrogen production and selective CO2 reduction by the C3N5 photocatalyst using only visible light
Kosei Ito, Kei Noda
DOI: 10.1039/D3CP04431A
Degradation of NTO induced by superoxide and hydroperoxyl radicals: a comprehensive DFT study
Liudmyla K. Sviatenko, Jerzy Leszczynski
DOI: 10.1039/D3CP05603A
Effects of gamma radiation on the electrical properties of InAs/InGaAs quantum dot-based laser structures grown on GaAs and Si substrates by molecular beam epitaxy
D. A. Jameel, Walter M. de Azevedo, Jorlandio F. Felix, N. Al Saqri, O. M. Lemine, S. Abu Alrub, M. Henini
DOI: 10.1039/D3CP03865C
Towards the thermal stability of dye-sensitized solar cells for wavelength-selective greenhouses using the polymorphism of light-scattering layers
Daniel Ursu, Elisei Ilieş, Radu Ricman, Magdalena Marinca, Szilard Bularka, Marinela Miclau, Aurel Gontean
DOI: 10.1039/D3SE01084H
Shaping the future of hybrid ion capacitors
Vanchiappan Aravindan, Konstantin Schutjajew, Marta Sevilla
DOI: 10.1039/D3SE90082G
こちらもおすすめ
N,N-二乙基-4-ブロモナフサルレン-1-カルボニルアミドはどのように合成されますか?
N,N-二乙基-4-ブロモナフサルレン-1-カルボニルアミドは、4-ブロモナフサルビンとN,N-ジエチルアミド基を有する反応物を用いて合成されます。触媒の使用は...
大黄酚-8-O-葡萄糖苷の市場動向や研究トレンドはどうですか?
大黄酚-8-O-葡萄糖苷の市場は、医薬品、機能食品、研究化学物質としての需要が高まっています。特に、その抗炎症作用や抗ウイルス作用に関する研究が増えています。価...
アトラキュリウム不純物5塩酸塩の物理化学的性質は何ですか?
アトラキュリウム不純物5塩酸塩のCAS番号は2048273-58-9です。この化合物は結晶性であり、分子量は約435.4 g/molです。水に溶けやすく、反応性...
2-イソブチルシクロヘキサン酮とは何ですか?
2-イソブチルシクロヘキサン酮は、CAS番号39207-65-3の化合物で、化学式はC11H20Oです。この化合物は、有機合成化学において重要な原料として使用さ...
2-溴-6-甲基烟酸を取り扱う際の実験室安全事項は何ですか?
この化合物は毒性と刺激性があります。密閉されたドラフトチャンバー内で処理し、PPE(ゴーグル、手袋)を使用してください。漏洩時は即座に通気し、適切な漏洩処理材を...
6-アミノニコニタルデオキシド塩化水和物の物理化学的性質は何ですか?
6-アミノニコニタルデオキシド塩化水和物のCAS番号は1588441-31-9です。この化合物は結晶性粉末で、分子量は220.63 g/molです。水に溶けやす...
塩酸中毒藜碱はどのように合成されますか?
塩酸中毒藜碱は、ピペリジンとピリジンの反応により合成されます。具体的には、ピペリジンとピリジンを反応させ、塩基触媒を使用してピペリジン環内 enters 3-ピ...
Methyl 4-(6-formyl-2-pyridinyl)benzoateに適用される法規ガイドラインは何ですか?
この化合物はCAS番号834884-81-0で、GHS分類では高毒性の危険性を持つと見なされます。REACH規則では登録が求められ、FDA/EPAでは環境、健康...
1-エチynyル-3-(三氟甲氧基)ベンゼンについて「に適用される法規ガイドラインは何ですか」
CAS番号 866683-57-0の1-エチynyル-3-(三氟甲氧基)ベンゼンは、GHS分類では易燃性化学品が該当し、REACH規則では特定の危険性を評価する...
メチル2-ブロモイソニコネートの代替品はありますか?
メチル2-ブロモイソニコネートの代替品には、メチルイソニコネートや他のブロモ化合物が含まれます。これらの代替物は、特定の用途に応じて選択されます。
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














