The dependence of the β-to-α phase transition behavior of poly(1,4-butylene adipate) on phase separated morphology in its blends with poly(vinylidene fluoride)
文献情報
Chunyue Hou, Huihui Li, Xiaoli Sun, Yanfang Wang, Shangtao Chen
Synchrotron wide-angle X-ray diffraction was used to monitor the melting and β-to-α transition behavior of β-poly(1,4-butylene adipate) (β-PBA) and its blends with poly(vinylidene fluoride) (PVDF). Two kinds of typical phase separated morphologies are prepared: interfabrillar (70/30 PBA/PVDF) and interlamellar (50/50 PBA/PVDF) morphologies. After melt recrystallization at 10 °C, β-PBA crystals are obtained. The thermal expansion, phase transition and melting behavior of β crystals highly depend on the phase separated morphology. The β crystals show the highest melting temperature and β-to-α phase transition temperature in 70% PBA, which is caused by the thick lamellae of PBA and/or the lower surface energy of chain folding, while the β crystals show the lowest melting temperature and β-to-α phase transition temperature in 50% PBA, which is caused by the thinner lamellae of PBA. An unexpectedly high melting temperature of α crystals transited from β crystals observed in 50% PBA due to the lamellar thickening occuring in the heating process. The different phase separated morphologies lead to different lamellae thicknesses and surface energies of chain folding which consequently alter the stability of the crystals. The phase transition and melting behavior of β-PBA in PBA/PVDF is also compared with its blends with poly(vinyl phenol) (PVPh). Completely different factors influence the phase transition behavior of β crystals in these two systems.
関連文献
In situ polymerization of supramolecular nanorods assembled from polymerizable perylene bisimide
Zhibo Li
DOI: 10.1039/C7PY00895C
Thermoresponsive laterally-branched polythiophene phenylene derivative as water-soluble temperature sensor
Victor R. De la Rosa, David Barker, Richard Hoogenboom
DOI: 10.1039/C7PY00919D
Novel photoacid generators for cationic photopolymerization
Nicolas Klikovits, Patrick Knaack, Daniel Bomze, Ingo Krossing, Robert Liska
DOI: 10.1039/C7PY00855D
Microplasma-assisted rapid, chemical oxidant-free and controllable polymerization of dopamine for surface modification
Zhe Wang, Chao Xu, Yuexiang Lu, Guoyu Wei, Gang Ye, Taoxiang Sun, Jing Chen
DOI: 10.1039/C7PY00805H
Synthesis and properties of poly(trifluoroethylene) via a persistent radical mediated polymerization of trifluoroethylene
Maxime Colpaert, Sanjib Banerjee, Vincent Ladmiral, Taizo Ono, Bruno Améduri
DOI: 10.1039/C7PY02018J
Construction of flexible and stable near-infrared absorbing polymer films containing nickel-bis(dithiolene) moieties via ligand-exchange post-polymerization modification
Jianhua Han, Zhihuan Weng, Zuoqiang Wu, Jingwen Cai, Jinyan Wang, Xigao Jian
DOI: 10.1039/C7PY00802C
こちらもおすすめ
2-ブロモ-9,9-ジフェニル-9H-フルオレンの主な用途は何ですか?
2-溴-9,9-二苯基芴は、医薬品、工業材料、有機合成の研究分野で応用されます。特に、レーザー材料や機能性ポリマーの合成に使用されることがあります。また、蛍光色...
四氯化铱の市場動向や研究トレンドはどうですか?
四氯化铱の市場は研究開発分野で注目されており、特にナノ技術や金属有機框架(MOFs)の分野での需要が増加傾向にあります。価格は安定しており、中国や韓国での生産が...
1-(4-溴-3-氟苯基)-2-氯乙酮を含む廃棄物はどのように処理すべきですか?
1-(4-溴-3-氟苯基)-2-氯乙酮 (CAS番号: 1260857-14-4) の廃棄物は専門的な廃棄処理が必要です。まず、廃棄物は密閉された容器に収集し、...
苦参酚Kとは何ですか?
苦参酚Kは、CAS番号101236-49-1を持つ化合物で、主に天然由来の生薬から抽出されます。この化合物は、抗炎症作用や抗癌作用を持つことが報告されています。
POTASSIUM (1-(TERTBUTOXYCARBONYL)AZETIDIN-3-YL)TRIFLUOROBORATE を含む廃棄物はどのように処理すべきですか?
POTASSIUM (1-(TERTBUTOXYCARBONYL)AZETIDIN-3-YL)TRIFLUOROBORATE を含む廃棄物は、まず安全なエント...
4-庚基-4’-联苯羧酸の市場動向や研究トレンドはどうですか?
4-庚基-4’-聯苯羧酸は、特殊化学品や合成化学の分野で用いられる化学物質ですが、市場動向としては、研究開発の進展とともに需要が増加しています。また、環境配慮型...
6-ブロモ-3-メトキシ-1-フェニル-1H-インドゾールを含む廃棄物はどのように処理すべきですか?
6-ブロモ-3-メトキシ-1-フェニル-1H-インドゾールを含む廃棄物は、適切な化学廃棄処理が必要です。通常、廃棄物は密閉容器に収集され、専門の廃棄処理業者に引...
4,4-二甲基-2-吡咯烷酮はどの業界で使用されていますか?
4,4-二甲基-2-吡咯烷酮は医薬、ポリマー、センサー、半導体などの業界で広く使用されています。特に溶媒としての性能が高く評価されています。
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.










![5-Acetyl-2,3-dihydrobenzo[b]furan structure 5-Acetyl-2,3-dihydrobenzo[b]furan structure](https://static.chemtradehub.com/structs/908/90843-31-5-eea4.webp)



