Thermo- and redox-responsive dendronized polymer hydrogels
文献情報
Xiacong Zhang, Yu Yin, Jiatao Yan, Afang Zhang
In order to combine dendritic structures and thermoresponsiveness within the field of metallo-supramolecular chemistry, a novel type of smart hydrogel was prepared through ferrous ion-induced supramolecular interactions from oligoethylene glycol (OEG)-based, first-generation (G1) dendritic copolymers containing terpyridine (Tpy) moieties. These hydrogels show both thermally-induced reversible shrunk-swelling and redox-mediated gel–sol transitions. Rheological analyses by rotational rheometry revealed that their storage modulus (G′) and loss modulus (G′′) were dependent on crosslinking density through changing the molar ratio of metal ions and Tpy moieties, as well as the copolymer composition with different ratios of OEG dendron and Tpy units. Copolymers pendanted with linear OEG units and second-generation (G2) dendrons were also prepared to compare the possible effects of architecture on the formation of hydrogels and their properties. By virtue of the thermoresponsiveness of these dendronized copolymers, hydrogels were further prepared through crosslinking of aggregates above the polymer phase-transition temperatures, which provides a convenient strategy to afford hydrogels with much improved elastic modulus. Moreover, encapsulation and thermally-mediated transition of the model drug from the hydrogels were investigated, to demonstrate the unique confinement from the OEG-based dendronized polymer matrix. This report provides not only a first route to fabricate intelligent hydrogels from dendronized copolymers through metal ions-mediated coordination, but also proves that thermoresponsive hydrogels with enhanced mechanical properties could be simply prepared by crosslinking thermally-induced polymer aggregates.
関連文献
Ethylene carbonate adsorption on the major surfaces of lithium manganese oxide Li1−xMn2O4 spinel (0.000 < x < 0.375): a DFT+U-D3 study
Brian Ramogayana, Pablo A. Aparicio, Matthew G. Quesne, Khomotso P. Maenetja, Phuti E. Ngoepe
DOI: 10.1039/C9CP05658K
Structural relationships for the design of responsive azobenzene-based lyotropic liquid crystals
Luke W. Giles, Joshua B. Marlow, Calum S. G. Butler, Geosmin A. Turpin, Liliana de Campo, Stephen T. Mudie, Charl F. J. Faul, Rico F. Tabor
DOI: 10.1039/C9CP05463D
Weak-field ligands enable inert early transition metal oxides to convert methane to methanol: the case of ZrO
Benjamin A. Jackson, Evangelos Miliordos
DOI: 10.1039/C9CP06050B
DNP NMR spectroscopy of cross-linked organic polymers: rational guidelines towards optimal sample preparation
Wei-Chih Liao, Atsuko Ogawa, Kazuhiko Sato, Christophe Copéret
DOI: 10.1039/C9CP05208A
Ti2O3/TiO2 heterophase junctions with enhanced charge separation and spatially separated active sites for photocatalytic CO2 reduction
Min Xu, Rui Yan, Haonan Li, Ning Sun, Yang Qu
DOI: 10.1039/C9CP05147C
Electronic structure, doping effect and topological signature in realistic intermetallics Li3−xNaxM (x = 3, 2, 1, 0; M = N, P, As, Sb, Bi)
Lei Jin, Xiaoming Zhang, Tingli He, Weizhen Meng, Xuefang Dai, Guodong Liu
DOI: 10.1039/C9CP06033B
Is the origin of green fluorescence in unsymmetrical four-ring bent-core liquid crystals single or double proton transfer?
Venkatesh Gude, Manobina Karmakar, Avishek Dey, Prasanta Kumar Datta, Kumar Biradha
DOI: 10.1039/C9CP06307B
Identification of a receiver triplet state in the ultrafast intersystem crossing of carbonylpyrenes
Lekshmi R. S., Gayathri B. Kurup, Sivaranjana Reddy Vennapusa
DOI: 10.1039/C9CP06857K
Photoemission from non-polar aromatic molecules in the gas and liquid phase
L. Longetti, M. Randulová, J. Ojeda, L. Mewes, L. Miseikis, J. Grilj, A. Sanchez-Gonzalez, T. Witting, T. Siegel, Z. Diveki, F. van Mourik, R. Chapman, C. Cacho, S. Yap, J. W. G. Tisch, E. Springate, J. P. Marangos, P. Slavíček, M. Chergui
DOI: 10.1039/C9CP06799J
Stability, electronic and mechanical properties of chalcogen (Se and Te) monolayers
Jaspreet Singh, Pooja Jamdagni, Mukesh Jakhar, Ashok Kumar
DOI: 10.1039/D0CP00511H
こちらもおすすめ
2,3-スチオエポキシマドルを取り扱う際の実験室安全事項は何ですか?
取り扱いにはPPE(プロテクティブ・パーソナル・エイド)が必要で、防ぐ手袋と保護眼鏡を着用してください。ドラフトチャンバーの使用を推奨します。漏洩した場合は、適...
BOC-S-3-アミニ-4-(4-メチオキシベンチル)-ブタン酸の代替品はありますか?
この化合物の代替品としては、BOC保護基を有さないアミノ酸やその他の保護基化合物が考えられます。また、メチオキシ基を有しない他の芳香族アミノ酸も代替品として挙げ...
Methyl 2-(chloromethyl)-3-nitrobenzoate(1218910-61-2)の代替品はありますか?
Methyl 2-(chloromethyl)-3-nitrobenzoate(1218910-61-2)の代替品としては、化学組成を変えることで効果を達成する...
(2R)-2-アミノ-N-ベンジル-3-ヒドロキシプロパナミドを含む廃棄物はどのように処理すべきですか?
(2R)-2-アミノ-N-ベンジル-3-ヒドロキシプロパナミドを含む廃棄物は、適切な廃棄物管理ガイドラインに基づき処理する必要があります。まず、廃棄物を適切に収...
6,7-二氢-咪唑並[1,2-a]ピリドイン-8(5h)-酮はどのように合成されますか?
6,7-二氢-咪唑並[1,2-a]ピリドイン-8(5h)-酮は、2-ブロモフェニルアセトインとリン酸ハロゲン化物を反応させることで合成できます。この反応は高温で...
エチル(3R)-3-ピロリジニル酢酸水和塩とは何ですか?
エチル(3R)-3-ピロリジニル酢酸水和塩は、CAS番号1332459-32-1の化合物で、(R)-乙基2-(ピロリジン-3-基)酢酸塩水和塩と呼ばれます。この...
(2S)-{[(2-メチルエチルオキシ]カルボニル}アミノ)[2-(トリアフルオロメチルフェニル]エチカシック酸の物理化学的性質は何ですか?
(2S)-{[(2-メチルエチルオキシ]カルボニル}アミノ)[2-(トリアフルオロメチルフェニル]エチカシック酸のCAS番号は1203454-45-8です。この...
2-ブロモ-1-(2-メチル-2-プロパニル)-4-ニトロベンゼンはどのように保存すればよいですか?
2-ブロモ-1-(2-メチル-2-プロパニル)-4-ニトロベンゼンは、直射日光を避けて暗所で、室温(約15℃〜25℃)、乾燥した場所に保存する必要があります。ま...
1-[(4-硝基フェニル)スルホニル]-1H-1,2,4-三唑の市場動向や研究トレンドはどうですか?
市場動向としては、1-[(4-硝基フェニル)スルホニル]-1H-1,2,4-三唑は主に農業用除草剤や合成化学製品の原料として利用されています。研究トレンドとして...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.












![6-(Benzyloxy)-8-(2-bromoacetyl)-2H-benzo[b][1,4]oxazin-3(4H)-one structure 6-(Benzyloxy)-8-(2-bromoacetyl)-2H-benzo[b][1,4]oxazin-3(4H)-one structure](https://static.chemtradehub.com/structs/926/926319-53-1-2287.webp)

![8-Bromo-6-fluoro[1,2,4]triazolo[1,5-a]pyridin-2-amine structure 8-Bromo-6-fluoro[1,2,4]triazolo[1,5-a]pyridin-2-amine structure](https://static.chemtradehub.com/structs/125/1257705-51-3-9f4a.webp)