A multi-step template-assisted approach for the formation of conducting polymer nanotubes onto conducting polymer films
文献情報
Aureli Calvet
After exhibiting the important limitations of the template-assisted approach when electropolymerization on simple stainless steel electrodes and electrospinning of insulating polymeric templates are combined, hollow poly(3,4-ethylenedioxythiophene) (PEDOT) nano- and microtubes have been successfully prepared using an alternative approach. In this procedure, which is based on a two-step electropolymerization process, electrospun fibers are collected onto a relatively flat PEDOT film that plays a crucial role in complete coating of the template in the second electropolymerization process. Once the insulating fiber templates have been eliminated by solvent etching, the ability to exchange charge reversibly of the resulting hollow tubes is very similar to that observed for films while the amount of the electroactive surface is noticeably higher. The diameter and density of hollow tubes can be easily controlled through this multi-step template-assisted approach, allowing to collect such PEDOT structures onto simple steel electrodes. The multi-step strategy overcomes the limitations of the conventional approach, which was restricted to the use of neural electrode sites and restricted to applications related with neural prostheses, opening the door to the use of PEDOT hollow nano- and microtubes in many important applications, as for example the detection of biomolecules and the fabrication of organic and bio-organic batteries.
関連文献
Electrolyte composition and ionic mobility in micropores
Bertel Kastening, Matthias Heins
DOI: 10.1039/B005206J
Switchable 19F MRI polymer theranostics: towards in situ quantifiable drug release
A. P. Bapat, G. J. Cowin
DOI: 10.1039/C7PY00345E
The reactions of IO with HO2, NO and CH3SCH3: Flow tube studies of kinetics and product formation
Gary P. Knight, John N. Crowley
DOI: 10.1039/B008447F
The biocompatible polythiophene-g-polycaprolactone copolymer as an efficient dopamine sensor platform
Anca D. Bendrea, Luminita Cianga, Ioan Cianga
DOI: 10.1039/C7PY01326D
Facile thiolation of hydroxyl functional polymers
O. C. J. Andrén, M. Malkoch
DOI: 10.1039/C7PY01097D
FTIR study of CO and NO adsorption and coadsorption on a Cu/SiO2 catalyst: Probing the oxidation state of copper
H. Knözinger
DOI: 10.1039/B009649K
Addition of dilute H2O2 solutions to H2–CO fuel gases and their influence on performance of a PEFC
DOI: 10.1039/B004883F
Introduction of anti-fouling coatings at the surface of supramolecular elastomeric materials via post-modification of reactive supramolecular additives
DOI: 10.1039/C7PY00801E
Characterization of the acidity of Mu-14 by solid-state NMR and NH3-STD
Angélique Simon, Jean-Louis Paillaud, Valentin Valtchev, Henri Kessler
DOI: 10.1039/B008553G
こちらもおすすめ
6- bromo-1-cyclopropyl-1H-benzimidazoleの市場動向や研究トレンドはどうですか?
6- bromo-1-cyclopropyl-1H-benzimidazoleは、抗炎症、抗ウイルス作用を持つことが報告されており、新薬開発の研究対象として注目...
環氧プロpanol-d5を取り扱う際の実験室安全事項は何ですか?
取り扱う際には、防護眼鏡と手袋を使用し、ドラフトチャンバー内で操作することを推奨します。漏洩時には適切な手順で処理し、安全データシートを常に参照してください。
2,2’-ジメチル-3,3’-ビピリジンはどのように合成されますか?
2,2’-ジメチル-3,3’-ビピリジンは、ピリジンと2-メチルアクリルアミドを有機合成反応で合成します。この反応では、ピリジンと2-メチルアクリルアミドを含有...
6-甲基ピリジン-2-ボリック酸の主な用途は何ですか?
6-甲基ピリジン-2-ボリック酸は、合成化学、医薬品合成、以及研究用途などに広く使用され、特に組換えDNA技術や分子生物学の研究において重要な役割を果たします。
(R)-3-(1-甲基-2-氧環己基)プロpano酸メチルは安全ですか?
(R)-3-(1-甲基-2-氧環己基)プロpano酸メチルは一定の安全性がありますが、直接的な皮膚接触や吸入は避けるべきです。使用する際は適切な個々の安全データ...
ketorolacはどのように保存すればよいですか?
ketorolacは、密封して遮光容器に保管し、直射日光や高温を避けて保存してください。温度は常温で保存し、湿度をなるべく低く保つことが推奨されます。
L-2,3-二氨基丙酸二盐酸盐を取り扱う際の実験室安全事項は何ですか?
L-2,3-二氨基丙酸二盐酸盐は腐食性が強く、皮膚や粘膜に刺激を与える可能性があります。取り扱う際は、防塵マスク、ゴーグル、手袋を使用し、適切な排気設備を使用し...
2-(4-溴ピリジン-2-基)乙腈の物理化学的性質は何ですか?
2-(4-溴ピリジン-2-基)乙腈のCAS番号は312325-73-8です。主に結晶形態で存在し、分子量は159.01 g/molです。この化合物は水に溶けやす...
3-フローロ-[1,1-ベンジレン]-3,4-ジカルボン酸を取り扱う際の実験室安全事項は何ですか?
この化合物は毒性は低いですが、直接的な接触や吸入に注意が必要です。PPE(個人防護具)を着用し、ドラフトチャンバーを使用して操作することを推奨します。また、漏洩...
3-(1-氧代-1,3-二氢-2H-2-异吲哚)丙酸の主な用途は何ですか?
3-(1-氧代-1,3-二氢-2H-2-异吲哚)丙酸は、薬理学研究や医薬品製造において広く用いられる化合物です。また、工業的な用途でも一部の化学反応の触媒や助剤...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














