Diffusion and precipitation processes in iron-based silica gardens

文献情報

出版日 2016-07-01
DOI 10.1039/C6CP02107G
インパクトファクター 3.676
著者

F. Glaab, J. Rieder, J. M. García-Ruiz, W. Kunz, M. Kellermeier


原文を見る

要旨

Silica gardens are tubular structures that form along the interface of multivalent metal salts and alkaline solutions of sodium silicate, driven by a complex interplay of osmotic and buoyant forces together with chemical reaction. They display peculiar plant-like morphologies and thus can be considered as one of the few examples for the spontaneous biomimetic self-ordering of purely inorganic materials. Recently, we could show that silica gardens moreover are highly dynamic systems that remain far from equilibrium for considerable periods of time long after macroscopic growth is completed. Due to initial compartmentalisation, drastic concentration gradients were found to exist across the tube walls, which give rise to noticeable electrochemical potential differences and decay only slowly in a series of coupled diffusion and precipitation processes. In the present work, we extend these studies and investigate the effect of the nature of the used metal cations on the dynamic behaviour of the system. To that end, we have grown single macroscopic silica garden tubes by controlled addition of sodium silicate sol to pellets of iron(II) and iron(III) chloride. In the following, the concentrations of ionic species were measured as a function of time on both sides of the formed membranes, while electrochemical potentials and pH were monitored online by immersing the corresponding sensors into the two separated solution reservoirs. At the end of the experiments, the solid tube material was furthermore characterised with respect to composition and microstructure by a combination of ex situ techniques. The collected data are compared to the previously reported case of cobalt-based silica gardens and used to shed light on ion diffusion through the inorganic membranes as well as progressive mineralisation at both surfaces of the tube walls. Our results reveal important differences in the dynamics of the three studied systems, which can be explained based on the acidity of the metal cations and the porosity of the membranes, leading to substantially dissimilar time-dependent solution chemistry as well as distinct final mineral structures. The insight gained in this work may help to better understand the diffusion properties and precipitation patterns in tubular iron (hydr)oxide/silicate structures observed in geological environments and during steel corrosion.

関連文献

Front cover

Cover

DOI: 10.1039/C6PY90184K

Cyclic poly(l-lactide)s via ring-expansion polymerizations catalysed by 2,2-dibutyl-2-stanna-1,3-dithiolane

H. R. Kricheldorf, S. M. Weidner, F. Scheliga

2017-01-31 Paper

DOI: 10.1039/C6PY02166B

Inside front cover

Cover

DOI: 10.1039/C6PY90029A

Control of cross-linking and reactions in one-step dispersion polymerization toward particles with combined anisotropies

Yanan Liu, Kun Jiang, Yuhong Ma, Lianying Liu, Wantai Yang

2016-03-24 Paper

DOI: 10.1039/C6PY00218H

A facile strategy to fabricate highly-stretchable self-healing poly(vinyl alcohol) hybrid hydrogels based on metal–ligand interactions and hydrogen bonding

Yan Hui, Zhi-Bin Wen, Florence Pilate, Hui Xie, Cheng-Jie Fan, Lan Du, Dan Liu, Ke-Ke Yang, Yu-Zhong Wang

2016-11-02 Paper

DOI: 10.1039/C6PY01752E

Inside front cover

Cover

DOI: 10.1039/C7PY90015E

Back cover

Cover

DOI: 10.1039/C6PY90156E

A Cu(ii) metal–organic framework as a recyclable catalyst for ARGET ATRP

Hui-Chun Lee, Markus Antonietti, Bernhard V. K. J. Schmidt

2016-11-08 Communication

DOI: 10.1039/C6PY01844K

Synthesis and crosslinking study of isomeric poly(thioether ether imide)s containing pendant nitrile and terminal phthalonitrile groups

Nafeesa Mushtaq, Guofei Chen, Lala Rukh Sidra, Yang Liu, Xingzhong Fang

2016-11-11 Paper

DOI: 10.1039/C6PY01705C

Back cover

Cover

DOI: 10.1039/C6PY90035F

こちらもおすすめ

化合物よくある質問

2,3-スチオエポキシマドルを取り扱う際の実験室安全事項は何ですか?

取り扱いにはPPE(プロテクティブ・パーソナル・エイド)が必要で、防ぐ手袋と保護眼鏡を着用してください。ドラフトチャンバーの使用を推奨します。漏洩した場合は、適...

4267-80-52,3-Thioepoxy Madol
化合物よくある質問

6-氟-2-氨基苯酚の主な用途は何ですか?

6-氟-2-氨基苯酚は主に医薬品の合成材料として使用され、一部の農薬の製造にも利用されます。また、研究用途でも広く使用されています。

53981-25-22-Amino-6-fluorophen...
化合物よくある質問

BOC-S-3-アミニ-4-(4-メチオキシベンチル)-ブタン酸の代替品はありますか?

この化合物の代替品としては、BOC保護基を有さないアミノ酸やその他の保護基化合物が考えられます。また、メチオキシ基を有しない他の芳香族アミノ酸も代替品として挙げ...

126800-59-7(3S)-4-(4-Methoxyphe...
化合物よくある質問

Methyl 2-(chloromethyl)-3-nitrobenzoate(1218910-61-2)の代替品はありますか?

Methyl 2-(chloromethyl)-3-nitrobenzoate(1218910-61-2)の代替品としては、化学組成を変えることで効果を達成する...

1218910-61-2Methyl 2-(chlorometh...
化合物よくある質問

(2R)-2-アミノ-N-ベンジル-3-ヒドロキシプロパナミドを含む廃棄物はどのように処理すべきですか?

(2R)-2-アミノ-N-ベンジル-3-ヒドロキシプロパナミドを含む廃棄物は、適切な廃棄物管理ガイドラインに基づき処理する必要があります。まず、廃棄物を適切に収...

175481-39-7(2R)-2-amino-N-benzy...
化合物よくある質問

6,7-二氢-咪唑並[1,2-a]ピリドイン-8(5h)-酮はどのように合成されますか?

6,7-二氢-咪唑並[1,2-a]ピリドイン-8(5h)-酮は、2-ブロモフェニルアセトインとリン酸ハロゲン化物を反応させることで合成できます。この反応は高温で...

457949-09-66,7-Dihydroimidazo[1...
化合物よくある質問

エチル(3R)-3-ピロリジニル酢酸水和塩とは何ですか?

エチル(3R)-3-ピロリジニル酢酸水和塩は、CAS番号1332459-32-1の化合物で、(R)-乙基2-(ピロリジン-3-基)酢酸塩水和塩と呼ばれます。この...

1332459-32-1Ethyl (3R)-3-pyrroli...
化合物よくある質問

(2S)-{[(2-メチルエチルオキシ]カルボニル}アミノ)[2-(トリアフルオロメチルフェニル]エチカシック酸の物理化学的性質は何ですか?

(2S)-{[(2-メチルエチルオキシ]カルボニル}アミノ)[2-(トリアフルオロメチルフェニル]エチカシック酸のCAS番号は1203454-45-8です。この...

1203454-45-8(2S)-({[(2-Methyl-2-...
化合物よくある質問

2-ブロモ-1-(2-メチル-2-プロパニル)-4-ニトロベンゼンはどのように保存すればよいですか?

2-ブロモ-1-(2-メチル-2-プロパニル)-4-ニトロベンゼンは、直射日光を避けて暗所で、室温(約15℃〜25℃)、乾燥した場所に保存する必要があります。ま...

6310-17-42-Bromo-1-(2-methyl-...
化合物よくある質問

1-[(4-硝基フェニル)スルホニル]-1H-1,2,4-三唑の市場動向や研究トレンドはどうですか?

市場動向としては、1-[(4-硝基フェニル)スルホニル]-1H-1,2,4-三唑は主に農業用除草剤や合成化学製品の原料として利用されています。研究トレンドとして...

57777-84-11-[(4-Nitrophenyl)su...

掲載誌

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自己引用率: 10.3%
年間論文数: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。