Biocompatible and bioreducible micelles fabricated from novel α-amino acid-based poly(disulfide urethane)s: design, synthesis and triggered doxorubicin release

文献情報

出版日 2015-06-30
DOI 10.1039/C5PY00828J
インパクトファクター 5.582
著者

Wentao Lu, Xiuxiu Wang, Ru Cheng, Chao Deng, Fenghua Meng, Zhiyuan Zhong


原文を見る

要旨

α-Amino acid-based functional biopolymers are highly appealing for various biomedical applications including controlled drug delivery. In this paper, we report the design and development of novel reductively biodegradable α-amino acid-based poly(disulfide urethane)s, denoted as AAPU(SS)s, as well as PEG-AAPU(SS)-PEG triblock copolymer micelles for triggered intracellular doxorubicin (DOX) release. AAPU(SS)s were synthesized with controlled Mn ranging from 4.6 to 35.7 kg mol−1via polycondensation reaction between two α-amino acid derivatives, disulfide-linked bis(ethyl L-serinate) (SS-BSER) and L-lysine ethyl ester diisocyanate (LDI). AAPU(SS)s are amorphous with a glass transition temperature (Tg) of 31.7–49.2 °C and were degraded into low molecular weight fragments under a reductive condition. PEG-AAPU(SS)-PEG copolymer could be readily obtained by treating AAPU(SS) with mPEG-NCO. PEG-AAPU(SS)-PEG formed micelles with a mean diameter of 155 nm. The in vitro release studies showed that drug release from DOX-loaded PEG-AAPU(SS)-PEG micelles was significantly accelerated in the presence of 10 mM glutathione (GSH). MTT assays revealed that DOX-loaded PEG-AAPU(SS)-PEG micelles caused effective growth inhibition of both RAW 264.7 and drug resistant MCF-7 cells (MCF-7/ADR) while the corresponding blank micelles were non-cytotoxic even at a high concentration of 1.0 mg mL−1. Confocal microscopy showed that PEG-AAPU(SS)-PEG micelles efficiently transported and released DOX into the perinuclear and nuclear regions of MCF-7/ADR cells. These biocompatible and bioreducible α-amino acid-based poly(disulfide urethane) micelles have appeared to be a particularly interesting platform for triggered intracellular anticancer drug delivery.

関連文献

Characterization of sulfur exchange reaction between polysulfides and elemental sulfur using a 35S radioisotope tracer method

Shigeru Yamada, Danhong Wang, Songri Li, Megumi Nishikawa, Eika Weihua Qian, Atsushi Ishihara, Toshiaki Kabe

2003-02-28 Communication

DOI: 10.1039/B212438F

Influence of the solvent on the crystal structure of PCBM and the efficiency of MDMO-PPV:PCBM ‘plastic’ solar cells

Minze T. Rispens, Auke Meetsma, Roman Rittberger, Christoph J. Brabec, N. Serdar Sariciftci, Jan C. Hummelen

2003-07-22 Communication

DOI: 10.1039/B305988J

Oligonucleosides with a nucleobase-including backbone; synthesis and self-association of novel dinucleotide analogues

Andrew J. Matthews, Punit K. Bhardwaj, Andrea Vasella

2003-03-12 Communication

DOI: 10.1039/B300932G

Octanuclearity and tetradecanuclearity in manganese chemistry: an octanuclear manganese(ii)/(iii) complex featuring the novel [Mn8(μ4- O)2(μ3-OH)2]14+ core and [Mn10IIMn4IIIO4(O2CMe)20{(2-py)2C(OH)O}4] (2-py = 2-pyridyl)

Constantinos J. Milios, Elena Kefalloniti, Catherine P. Raptopoulou, Aris Terzis, Ramon Vicente, Nikolia Lalioti, Albert Escuer, Spyros P. Perlepes

2003-03-05 Communication

DOI: 10.1039/B300986F

Effects of trace metals and organic additives on porosity and dielectric constant of high purity mesoporous silica films

Jerome C. Birnbaum, Glen E. Fryxell, Xiaohong Li, Chris A. Coyle, Glen C. Dunham, Suresh Baskaran

2003-06-20 Communication

DOI: 10.1039/B304903E

Observation of high enantioselectivity for the gas phase hydrogenation of methyl pyruvate using supported Pt catalysts pre-modified with cinchonidine

Nicholas Dummer, David J. Willock, Stuart H. Taylor, Richard P. K. Wells, Peter B. Wells, Graham J. Hutchings

2003-06-27 Communication

DOI: 10.1039/B304976K

Polymernanosphere lithography: fabrication of an ordered trigonal polymeric nanostructure

Dong Kee Yi, Dong-Yu Kim

2003-03-26 Communication

DOI: 10.1039/B300638G

Synthesis, separation, and isomer-dependent packing in two dimensions—detected by scanning tunnelling microscopy—of a TTF derivative

Elba Gomar-Nadal, Mohamed M. S. Abdel-Mottaleb, Steven De Feyter, Jaume Veciana, Concepció Rovira, David B. Amabilino, Frans C. De Schryver

2003-03-10 Communication

DOI: 10.1039/B300731F

A novel peptide synthesis using fluorous chemistry

Mamoru Mizuno, Kohtaro Goto, Tsuyoshi Miura, Daisuke Hosaka, Toshiyuki Inazu

2003-03-18 Communication

DOI: 10.1039/B300682D

こちらもおすすめ

化合物よくある質問

H-Leu-Ser-Lys-Leu-OH trifluoroacetate saltに適用される法規ガイドラインは何ですか?

CAS番号162559-45-7のH-Leu-Ser-Lys-Leu-OH trifluoroacetate saltは、GHS( Chemicals Clas...

162559-45-7H-Leu-Ser-Lys-Leu-OH...
化合物よくある質問

Trimethyltin Chlorideの物理化学的性質は何ですか?

CAS番号1066-45-1のトリメチルチリドは、白色結晶性粉末で、分子量は297.77です。この化合物は水にわずかに溶けますが、酢酸、エタノール、ジエチルエー...

1066-45-1Trimethyltin Chlorid...
化合物よくある質問

ニコール酸化物水和物の主な用途は何ですか?

ニコール酸化物水和物は、主に金属分離、研磨剤、酸化剤、染料製造の原料として利用されます。また、電気化学製品、触媒、分析化学の分野でも広く使用されています。

7789-49-3Nickel(II) Bromide T...
化合物よくある質問

(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際の実験室安全事項は何ですか?

(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際は、PPE(防護服、ゴーグル、マスク、手袋)を使用する必要があります。ドラフトチャンバ...

1253912-00-3(2,3-dimethyl-2H-ind...
化合物よくある質問

4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは安全ですか?

4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは一般的に安全とは言えません。取扱いには注意が必要で、直接的な皮膚接触や吸入は避けてください。

1132672-05-94-Bromo-1-methoxy-2-...
化合物よくある質問

4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯はどの業界で使用されていますか?

4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯は医薬業界、ポリマー業界、センサー業界、半導体業界で使用されています。特に、光触媒や蛍光材料として利用されています...

2397-00-42,2'-(1,2-Ethenediyl...
化合物よくある質問

2,3,5,6-四氯-4-ピリジンスチオールを取り扱う際の実験室安全事項は何ですか?

2,3,5,6-四氯-4-ピリジンスチオールは非常に毒性があり、皮膚や粘膜に刺激を与える可能性があります。取り扱う際には、ゴーグル、ゴム手袋、防塵マスクを着用し...

10351-06-12,3,5,6-Tetrachloro-...
化合物よくある質問

替米沙坦ナトリウムとは何ですか?

替米沙坦ナトリウム(CAS番号: 515815-47-1)は、血管張力素II受容体拮抗薬として機能する医薬品で、高血圧症の治療に使用されます。

515815-47-1Telmisartan sodium
化合物よくある質問

TG 4-155はどのように合成されますか?

TG 4-155は、2-(2-メチル-1H-インドン-1-イル)エチルアミドと3,4,5-トリメトキシフェノールを反応させ、選択性的に合成できます。一般的には、...

1164462-05-8(2E)-N-[2-(2-Methyl-...
化合物よくある質問

エチルヒドロキシキニリン-6-カルボキシ酸は適用される法規ガイドラインは何ですか?

エチルヒドロキシキニリン-6-カルボキシ酸のCAS番号1261631-01-9は、GHS分類の第2クラスの腐食物質(皮膚に強い腐食性)に分類されます。また、EU...

1261631-01-9Ethyl 7-Hydroxyquino...

掲載誌

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自己引用率: 7.3%
年間論文数: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。