“One-pot” synthesis and characterisation of novel P(3HB)–ethyl cellulose based graft composites through lipase catalysed esterification
文献情報
Hafiz M. N. Iqbal, Godfrey Kyazze, Thierry Tron, Tajalli Keshavarz
In the present study a series of graft composites with poly(3-hydroxybutyrate) (P(3HB) as side chains and ethyl cellulose (EC) as a backbone polymer was successfully synthesised through enzymatic esterification. A range of composites between P(3HB) and EC with different P(3HB) : EC ratios were prepared using lipase as a model catalyst. Subsequently, the resulting composites were then removed from the casting surface under ambient conditions. Finally the target composites were characterised in detail by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and X-ray diffraction (XRD), and the thermo-mechanical behaviours of the grafted composites were investigated by differential scanning calorimetry (DSC) and dynamic mechanical analyser (DMA) measurements. Whereas, hydrophobic and hydrophilic characteristics were studied through drop contour analysis using water contact angle (WCA) measurements. SEM analyses revealed that the uniform P(3HB) dispersion in the backbone polymer increased the area of P(3HB)–EC contact which further contributed to the efficient functionality of the resulting composites as evidenced by XRD, thermo-mechanical and WCA characterisation profiles of the tested composites. In comparison to the untreated P(3HB) a clear shift in the XRD peaks was observed which clearly indicated the breakdown of some crystalline domains and the regeneration of the amorphous material at a specific region of 2θ values in the case of the grafted composites. Interestingly, untreated P(3HB) was hydrophobic in nature and after lipase treatment P(3HB) and P(3HB)–EC based graft composites attained higher levels of hydrophilicity which is a desired characteristic to enhance the biocompatibility of the materials for proper cell adhesion and proliferation therefore, suggesting P(3HB)–EC as a potential candidate for tissue engineering/bio-medical type applications.
関連文献
Evaluation of nitrogen fate from land-application wastewater treatment for cheese making and vegetable processing facilities
Geoffrey S. Siemering, Francisco J. Arriaga, Sarah L. Naatz
DOI: 10.1039/D3VA00064H
Sequential extraction of high-value added molecules from grape pomaces using supercritical fluids with water as a co-solvent
Karen Trchounian, Laurine Buon, Laurence Noret, Benoît Pinel, Jeremy Lagrue, Ali Assifaoui
DOI: 10.1039/D3SU00183K
Subambient passive radiative cooling effects of barium sulfate and calcium carbonate paints under Malaysia's tropical climate
William Raphael Joseph, Jun Yeang Tan, Apurav Krishna Koyande, Ianatul Khoiroh, Jerry Joynson, Steve Willis
DOI: 10.1039/D3VA00161J
Operando insights into correlating CO coverage and Cu–Au alloying with the selectivity of Au NP-decorated Cu2O nanocubes during the electrocatalytic CO2 reduction
Clara Rettenmaier, Antonia Herzog, Daniele Casari, Martina Rüscher, Hyo Sang Jeon, David Kordus, Mauricio Lopez Luna, Stefanie Kühl, Uta Hejral, Earl M. Davis, See Wee Chee, Janis Timoshenko, Duncan T.L. Alexander, Arno Bergmann, Beatriz Roldan Cuenya
DOI: 10.1039/D3EY00162H
Recent advances in thermogels for the management of diabetic ocular complications
Joey Hui Min Wong, Rubayn Goh
DOI: 10.1039/D3LP00136A
Iron oxide-promoted photochemical oxygen reduction to hydrogen peroxide (H2O2)
Thomas Freese, Jelmer T. Meijer, Maria B. Brands, Georgios Alachouzos, Marc C. A. Stuart, Rafael Tarozo, Dominic Gerlach, Joost Smits, Petra Rudolf, Joost N. H. Reek, Ben L. Feringa
DOI: 10.1039/D3EY00256J
Electrochemically decoupled reduction of CO2 to formate over a dispersed heterogeneous bismuth catalyst enabled via redox mediators
Mark Potter, Daniel E. Smith, Craig G. Armstrong, Kathryn E. Toghill
DOI: 10.1039/D3EY00271C
Research progress and perspectives on photocatalysts based on the lead-free double halide perovskite
Do Yeon Heo, Mahider Asmare Tekalgne, Soo Young Kim
DOI: 10.1039/D3EY00229B
Macroporous hydrogels for soil water retention in arid and semi-arid regions
Ryan Zowada, Reza Foudazi
DOI: 10.1039/D3LP00117B
こちらもおすすめ
3-(5-フェニル-2-ファイル)-プロパン酸の市場動向や研究トレンドはどうですか?
この化合物の市場動向は不明ですが、類似化合物の需要は化学繊維、医薬品、農薬分野で安定しています。研究トレンドとしては、該当化合物の生物学的活性の評価や、その他の...
3- Chloro-1H-indazol-5-olはどのように保存すればよいですか?
3- チロロ-1H-吲唑-5-醇は遮光し、直射日光を避けて、温度は室温を推奨し、密閉容器に保存してください。
L-(1-~13~C)メチオニンの市場動向や研究トレンドはどうですか?
L-(1-~13~C)メチオニンは、医薬品やバイオテクノロジー分野での研究が増加しており、その価格は安定しています。新興研究分野では、代謝解析や遺伝子機能解析で...
1,3-フェニレンビスメチレンビスアクリレートは安全ですか?
1,3-フェニレンビスメチレンビスアクリレートは一般的に安全ですが、直接皮膚に触れる場合は保護用具を使用することを推奨します。高濃度の蒸気が吸入された場合は呼吸...
丹参醇Aはどのように保存すればよいですか?
丹参醇Aは、直射日光を避けて室温で保存し、密栓容器に入れることをお勧めします。適切な保存条件は、安定性を保ち、安全性を確保する上で重要です。
4-メチル-2-(1,1,1-三フロロ-2-メチルプロパニル)ピリドインとは何ですか?
CAS番号1378865-93-0の4-メチル-2-(1,1,1-三フロロ-2-メチルプロパニル)ピリドインは、合成化学分野で用いられる有機化合物の一種です。こ...
N-フェニルベンジル-2-クロロ酢氨を取り扱う際の実験室安全事項は何ですか?
N-フェニルベンジル-2-クロロ酢氨は毒性があり、皮膚や粘膜に刺激を与えます。取り扱う際には、保護眼鏡、手袋、ゴーグルを着用することを強く推奨します。ドラフトチ...
UCN-02を取り扱う際の実験室安全事項は何ですか?
UCN-02は毒性は低いですが、人体への直接的な接触は避けるべきです。PPE要件はグローブと顔面保護具を着用することです。ドラフトチャンバーを使用して漏洩を処理...
N-[3-[2-(二甲基氨基)乙氧基]-4-甲氧基苯基]-2'-甲基-4'-(5-甲基-1,2,4-恶二唑-3-基)-[1,1'-联苯]-4-甲酰胺を取り扱う際の実験室安全事項は何ですか?
手袋と保護眼鏡を着用し、漏洩時には吸気防止装置を使用してください。室温、乾燥した場所に保管し、直日光から隔離してください。SDS(安全データシート)を参照してく...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














