Biodegradable polyphosphazenes containing antibiotics: synthesis, characterization, and hydrolytic release behavior

文献情報

出版日 2012-12-21
DOI 10.1039/C2PY21064A
インパクトファクター 5.582
著者

Zhicheng Tian, Yufan Zhang, Xiao Liu, Chen Chen, Mark J. Guiltinan, Harry R. Allcock


原文を見る

要旨

Novel polyphosphazenes containing the fluoroquinolone antibiotic substituents, ciprofloxacin or norfloxacin, were synthesized and characterized. Nano/microfibers of several selected polymers were prepared by an electrospinning technique. The sensitivity to hydrolysis, pH behavior, and antibiotic release profile of all the polymers as films and the selected polymers as nano/microfibers were investigated. The hydrolysis release behavior was further studied by an in vitro antibacterial test against E. coli. Protection and deprotection reactions of ciprofloxacin and norfloxacin were carried out before and after polymer synthesis to prevent cross-linking of multi-functional reagents with polymers. No more than 25 mol% of antibiotics can be introduced to poly(dichlorophosphazene) which was synthesized by a thermal ring opening polymerization of hexachlorocyclotriphosphazene. Various amino acid ethyl esters (glycine, alanine, and phenylalanine) were linked to the polymers as co-substituents to increase the solubility as well as to control the rate of antibiotic release. Depending on the polymer compositions, 5–23% weight loss and 4–30% antibiotic release were observed in a six week hydrolysis study at 37 °C. The corresponding nano/microfibers showed a much faster degradation and antibiotics release due to a substantially larger surface area. The in vitro antibacterial tests showed an antibacterial effect as long as ciprofloxacin or norfloxacin was released from the polymers. Meanwhile, all the polymers gave a near-neutral hydrolysis environment with the pH ranging from 5.9 to 6.8.

関連文献

Hyphenated separation techniques for complex polymers

Harald Pasch

2013-01-17 Review Article

DOI: 10.1039/C3PY21095B

Towards high-performance heterogeneous palladium nanoparticle catalysts for sustainable liquid-phase reactions

Beau Van Vaerenbergh, Jeroen Lauwaert, Pieter Vermeir, Joris W. Thybaut, Jeriffa De Clercq

2020-07-09 Review Article

DOI: 10.1039/D0RE00197J

UV-induced functionalization of poly(divinylbenzene) nanoparticlesvia efficient [2 + 2]-photocycloadditions

Anitha Ethirajan, Matthias Conradi, Kayte Ranieri, Bert Conings, Hans-Gerd Boyen, Tanja Junkers

2013-05-08 Paper

DOI: 10.1039/C3PY00427A

pH degradable dendron-functionalized poly(2-ethyl-2-oxazoline) prepared by a cascade “double-click” reaction

Sebla Onbulak, Amitav Sanyal, Richard Hoogenboom

2013-03-15 Paper

DOI: 10.1039/C3PY00258F

Activation of homogenous polyolefin catalysis with a machine-assisted reactor laboratory-in-a-box (μAIR-LAB)

Benjamin A. Rizkin, Ryan L. Hartman

2020-06-18 Paper

DOI: 10.1039/D0RE00139B

N-Acetoxy-phthalimide (NAPI) as a new H-abstracting agent at high temperature: application to the melt functionalization of polyethylene

Denis Bélékian, Philippe Cassagnau, Jean-Jacques Flat, Sébastien Quinebeche, Laurent Autissier, Denis Bertin, Didier Siri, Didier Gigmes, Yohann Guillaneuf, Philippe Chaumont, Emmanuel Beyou

2013-03-15 Communication

DOI: 10.1039/C3PY00246B

A facile and highly efficient strategy for esterification of poly(meth)acrylic acid with halogenated compounds at room temperature promoted by 1,1,3,3-tetramethylguanidine

Qianbiao Li, Yinyin Bao, Hu Wang, Fanfan Du, Qing Li, Bangkun Jin, Ruke Bai

2013-03-22 Paper

DOI: 10.1039/C3PY00155E

こちらもおすすめ

化合物よくある質問

2,5-二羧基氟苯の市場動向や研究トレンドはどうですか?

2,5-二羧基氟苯の市場は、主に医薬品および農薬の研究開発において伸長しています。一方、環境への影響や安全性の懸念から、その使用は一定の制限が置かれています。今...

3906-87-42-Fluoroterephthalic...
化合物よくある質問

8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物はどのように処理すべきですか?

8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物は専門的な廃棄処理が必要です。具体的には、廃棄物は密閉の容器に収集し、適切な危険物対策を講じて専門業者に引...

33289-45-18-Methyl-2-(2-thieny...
化合物よくある質問

2,4-二氯-6-甲基5-嘧啶甲醛の主な用途は何ですか?

2,4-二氯-6-甲基5-嘧啶甲醛は、主に薬品の合成材料として使用され、また農薬や染料の製造にも用いられます。

933686-24-92,4-Dichloro-6-methy...
化合物よくある質問

レターメビールとは何ですか?

レターメビールは化学物質で、CAS番号917389-32-3です。主な用途は抗ウイルス薬として医薬品に使用されます。

917389-32-3Letermovir
化合物よくある質問

2-(1,3-二氧杂烷-2-基)噻唑の物理化学的性質は何ですか?

CAS番号24295-04-3の2-(1,3-二氧杂烷-2-基)噻唑は、結晶形態により白色粉末を呈します。分子量は208.23 g/molであり、水に溶けにくい...

24295-04-32-(1,3-Dioxolan-2-yl...
化合物よくある質問

L-beta-高酪氨酸塩酸塩は安全ですか?

L-beta-高酪氨酸塩酸塩自体は毒性は低く、しかし使用する際は適切な個人保護具を使用し、誤飲や皮膚への接触を避けることが推奨されます。

336182-13-9(3S)-3-Amino-4-(4-hy...
化合物よくある質問

睡茄灯笼草素Cはどのように合成されますか?

睡茄灯笼草素Cは、シクラメンケチャナfromaceaeから抽出する方法や、化学合成法で合成することができます。典型的な化学合成法では、3β,22-二オキシエクス...

81644-34-0(6beta,17alpha,22R)-...
化合物よくある質問

4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯はどのように保存すればよいですか?

4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯は直射日光を避けて、室温で保存するのが良いです。湿度を避けて密閉容器に入れて保管し、未使用の状態で長期保存することができ...

780705-64-82-Methyl-2-propanyl ...
化合物よくある質問

NBI-74330の主な用途は何ですか?

NBI-74330は主に薬理学研究および医療用途に使用されています。その主な用途は抗がん作用を有するため、がん治療の研究に使用されています。

855527-92-3N-{(1R)-1-[3-(4-Etho...
化合物よくある質問

6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸はどのように合成されますか?

6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸は、6-トリフルオロメチル-2-クロロピリジンとボリルリチウムを触媒なしで反応させることで合成するこ...

1446486-10-7[2-Chloro-6-(trifluo...

掲載誌

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自己引用率: 7.3%
年間論文数: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。