Molecular insight into the high selectivity of double-walled carbon nanotubes
文献情報
Piotr Kowalczyk
Combining experimental knowledge with molecular simulations, we investigated the adsorption and separation properties of double-walled carbon nanotubes (DWNTs) against flue/synthetic gas mixture components (e.g.CO2, CO, N2, H2, O2, and CH4) at 300 K. Except molecular H2, all studied nonpolar adsorbates assemble into single-file chain structures inside DWNTs at operating pressures below 1 MPa. Molecular wires of adsorbed molecules are stabilized by the strong solid–fluid potential generated from the cylindrical carbon walls. CO2 assembly is formed at very low operating pressures in comparison to all other studied nonpolar adsorbates. The adsorption lock-and-key mechanism results from perfect fitting of rod-shaped CO2 molecules into the cylindrical carbon pores. The enthalpy of CO2 adsorption in DWNTs is very high and reaches 50 kJ mol−1 at 300 K and low pore concentrations. In contrast, adsorption enthalpy at zero coverage is significantly lower for all other studied nonpolar adsorbates, for instance: 35 kJ mol−1 for CH4, and 14 kJ mol−1 for H2. Applying the ideal adsorption solution theory, we predicted that the internal pores of DWNTs have unusual ability to differentiate CO2 molecules from other flue/synthetic gas mixture components (e.g.CO, N2, H2, O2, and CH4) at ambient operating conditions. Computed equilibrium selectivity for equimolar CO2–X binary mixtures (where X: CO, N2, H2, O2, and CH4) is very high at low mixture pressures. With an increase in binary mixture pressure, we predicted a decrease in equilibrium separation factor because of the competitive adsorption of the X binary mixture component. We showed that at 300 K and equimolar mixture pressures up to 1 MPa, the CO2–X equilibrium separation factor is higher than 10 for all studied binary mixtures, indicating strong preference for CO2 adsorption. The overall selective properties of DWNTs seem to be superior, which may be beneficial for potential industrial applications of these novel carbon nanostructures.
おすすめジャーナル

Journal of Asian Natural Products Research

Electroanalysis

Bioorganic & Medicinal Chemistry

Bioorganic & Medicinal Chemistry Letters

Medicinal Chemistry Research

Main Group Chemistry

Acta Metallurgica Sinica-English Letters

Colloid Journal

Herald of the Russian Academy of Sciences

Journal of Chemical Sciences
関連文献
A novel reduction approach to fabricate quantum-sized SnO2-conjugated reduced graphene oxide nanocomposites as non-enzymatic glucose sensors
Yixing Ye, Panpan Wang, Enmei Dai, Jun Liu, Zhenfei Tian, Changhao Liang, Guosheng Shao
DOI: 10.1039/C4CP00554F
Interfacial processes studied by coupling electrochemistry at the polarised liquid–liquid interface with in situ confocal Raman spectroscopy
Lukasz Poltorak, Manuel Dossot, Grégoire Herzog, Alain Walcarius
DOI: 10.1039/C4CP03254C
Hexagonal ice stability and growth in the presence of glyoxal and secondary organic aerosols
Vangelis Daskalakis, Marios Hadjicharalambous
DOI: 10.1039/C4CP02290D
Bonding and spectroscopic properties of complexes of SO2–O2 and SO2–N2 and its atmospheric consequences
Samiyara Begum, Ranga Subramanian
DOI: 10.1039/C4CP01084A
Stress in titania nanoparticles: an atomistic study
Robert Darkins, Maria L. Sushko, Jun Liu, Dorothy M. Duffy
DOI: 10.1039/C3CP54357A
Computational studies of electrochemical CO2 reduction on subnanometer transition metal clusters
Cong Liu, Haiying He, Peter Zapol, Larry A. Curtiss
DOI: 10.1039/C4CP02690J
Local silico-aluminophosphate interfaces within phosphated H-ZSM-5 zeolites
Hendrik E. van der Bij, Bert M. Weckhuysen
DOI: 10.1039/C3CP54791D
Solid state effects on the electronic structure of H2OEP
G. Di Santo, M. Caputo, A. Goldoni, M. Kumar, M. Pedio
DOI: 10.1039/C4CP03450C
Platinum–hydrogen vibrations and low energy electronic excitations of 13-atom Pt nanoclusters
Melanie Keppeler
DOI: 10.1039/C4CP02052A
Enhanced visible light photocatalytic activity of Cu2O via cationic–anionic passivated codoping
Yao Jiang, Hongkunag Yuan
DOI: 10.1039/C4CP03631J
こちらもおすすめ
2-メトキシ-4-(メチルスルフィニル)アミンの主な用途は何ですか?
2-メトキシ-4-(メチルスルフィニル)アミンは、主に医薬品および農薬の製造に使用されます。また、合成化学の一部として研究用材料としても利用されます。
4,6-二氯-N-甲基ピラミジンアミンの代替品はありますか?
代替品としては、4,6-二クロロピラミジンアミンや他のピラミジン系化合物が考えられます。ただし、目的と用途によって最適な代替品は異なります。
6-氯-4-甲基-1H-吲哚を含む廃棄物はどのように処理すべきですか?
6-氯-4-甲基-1H-吲哚の廃棄物は、適切な容器に収集し、密閉して保管します。温度は常温、湿度は低く、直射日光を避けて保管することを推奨します。廃棄処理は専門...
2-フローユロ-4-(トリフルオロメチル)ベンゾイドについて「に適用される法規ガイドラインは何ですか」
2-フローユロ-4-(トリフルオロメチル)ベンゾイドのCAS番号は207974-08-1です。この化合物はGHS分類で毒性物質と有害な反応物質として分類されます...
4-ニトロフェニルN-[(ベンゼルオキシルカーボンイル]グリシングリシングリシン酸はどのように保存すればよいですか?
4-ニトロフェニルN-[(ベンゼルオキシルカーボンイル]グリシングリシングリシン酸は、室温で暗所に保管し、乾燥した環境で保存することを推奨します。容器は密閉性の...
イソデスロラタドリンの代替品はありますか?
イソデスロラタドリンの代替品としては、デスロラタドリンや他の抗ヒスタミン薬が挙げられます。具体的には、デスロラタドリン、ラセカミド、フェルタドリンなどが、症状や...
5-甲氧基-1,2,3,4-四氢异喹啉盐酸盐はどのように合成されますか?
5-甲氧基-1,2,3,4-四氢异喹啉盐酸盐の一般的な合成方法は、メタノール中で5-メトキシ-1,2,3,4-四ヒュドロイソキシンを塩酸で塩化します。この反応で...
4-アミノ-5-メトキシ-2-トルエンサルホニック酸についての法規ガイドラインは何ですか?
CAS番号6471-78-9の4-アミノ-5-メトキシ-2-トルエンサルホニック酸は、GHS分類では corrosive(腐食性)と識別されます。EUのREAC...
甲基孕酮を取り扱う際の実験室安全事項は何ですか?
甲基孕酮の取り扱いは、PPE(個人保護具)の使用が必要な重要な安全事項を伴います。防塵マスク、ゴーグル、手袋を着用することが推奨されます。ドラフトチャンバーを使...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.
![4-[(2-{2-[2-(2-Aminoethoxy)ethoxy]ethoxy}ethyl)amino]-2-(2,6-dioxo-3-piperidinyl)-1H-isoindole-1,3(2H)-dione structure 4-[(2-{2-[2-(2-Aminoethoxy)ethoxy]ethoxy}ethyl)amino]-2-(2,6-dioxo-3-piperidinyl)-1H-isoindole-1,3(2H)-dione structure](https://static.chemtradehub.com/structs/209/2093416-31-8-3162.webp)
![4-Chloro-2-{[(2-chlorophenoxy)acetyl]amino}benzoic acid structure 4-Chloro-2-{[(2-chlorophenoxy)acetyl]amino}benzoic acid structure](https://static.chemtradehub.com/structs/351/351424-20-9-9467.webp)

![[(5-Methyl-1,3,4-thiadiazol-2-yl)sulfanyl]acetic acid structure [(5-Methyl-1,3,4-thiadiazol-2-yl)sulfanyl]acetic acid structure](https://static.chemtradehub.com/structs/509/50918-26-8-4ce8.webp)
![2-Methyl-2-propanyl {3-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]-3-oxetanyl}carbamate structure 2-Methyl-2-propanyl {3-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]-3-oxetanyl}carbamate structure](https://static.chemtradehub.com/structs/127/1279090-25-3-1b84.webp)