One-pot surface modification of rubbery polymer films
文献情報
Hirofumi Tsuruta, Yoshihisa Fujii, Keiji Tanaka
A novel method to modify the surface of rubbery polymer films on the basis of the preferential segregation of inorganic materials fed into the system in tiny amounts is proposed. The surface so prepared had several prominent properties such as surface hardness, anti-oxidant properties, transparency, and so forth.
関連文献
Electrical mobilities of multiply charged ionic-liquid nanodrops in air and carbon dioxide over a wide temperature range: influence of ion-induced dipole interactions
Juan Fernández-García, Juan Fernández de la Mora
DOI: 10.1039/C4CP02850C
ωB97X-V: A 10-parameter, range-separated hybrid, generalized gradient approximation density functional with nonlocal correlation, designed by a survival-of-the-fittest strategy
Narbe Mardirossian, Martin Head-Gordon
DOI: 10.1039/C3CP54374A
Resonant Raman spectra of molecules with diradical character: multiconfigurational wavefunction investigation of neutral viologens
Julia Romanova, Vincent Liégeois, Benoît Champagne
DOI: 10.1039/C4CP02977A
Selective fluorescence sensing of polynitroaromatic explosives using triaminophenylbenzene scaffolds
Pratap Vishnoi, Mrinalini G. Walawalkar, Saumik Sen, Anindya Datta, G. Naresh Patwari, Ramaswamy Murugavel
DOI: 10.1039/C4CP00930D
Microsecond molecular dynamics simulation of guanidinium chloride induced unfolding of ubiquitin
Manoj Mandal, Chaitali Mukhopadhyay
DOI: 10.1039/C4CP01657B
Nanoporous molybdenum carbide wires as an active electrocatalyst towards the oxygen reduction reaction
Xiaojun Bian, Jingjing Xiao, Baohong Liu, Micheál D. Scanlon, Hubert H. Girault
DOI: 10.1039/C3CP54754J
Control of conformers combining cooling by supersonic expansion of seeded molecular beams with hexapole selection and alignment: experiment and theory on 2-butanol
Keita Kanda, Dock-Chil Che
DOI: 10.1039/C3CP54475C
Migration of Mn cations in delithiated lithium manganese oxides
Yuan Hu, Chi-Kai Lin, Yang Ren, Yang-Kook Sun, Zonghai Chen
DOI: 10.1039/C4CP02795G
こちらもおすすめ
N-乙酰基-L-精氨酸はどのように合成されますか?
N-乙酰基-L-精氨酸は、L-精氨酸をエタノールと酸化アクリル酸で反応させて得られます。この合成過程では、酸化アクリル酸がL-精氨酸のN-アミノグループに結合す...
カウウェルパリミタートを含む廃棄物はどのように処理すべきですか?
カウウェルパリミタートの廃棄物は、化学廃棄物として適切に収集し、専門的な廃棄処理業者に委託します。処理には、有害物質の除去と環境への影響最小化が重要です。温度は...
タテライル1,4,8,11-テトラエチルアセートの代替品はありますか?
タテライル1,4,8,11-テトラエチルアセートの代替品として、他のエチルエステル化合物や、有機窒素化合物が考えられます。ただし、代替品の選択は目的や使用条件に...
異丁卡因を取り扱う際の実験室安全事項は何ですか?
異丁卡因は毒性があり、皮膚や目を刺激する可能性があります。作業中は保護目鏡、防護手袋、防護マスクを使用し、ドラフトチャンバーで扱うべきです。漏えいした場合、その...
4-氯-2-丙基吡啶を取り扱う際の実験室安全事項は何ですか?
4-氯-2-丙基吡啶は有毒で、吸入や皮膚接触を避けることが重要です。PPEとしてゴーグル、マスク、長袖のガウン、手袋を使用し、ドラフトチャンバーを用いて操作しま...
9,10-脱水阿霉素について適用される法規ガイドラインは何ですか?
CAS番号80996-23-2の9,10-脱水阿霉素は、GHS分類においては第3類毒性物質に分類され、REACH規則においてはカテゴリー1の急性毒性物質とされて...
4-(3-溴苯基)噻唑-2-甲酸の物理化学的性質は何ですか?
4-(3-溴苯基)噻唑-2-甲酸の分子量は265.01です。この化合物は水に微溶です。反応性は中程度で、酸性やアルカリ性の条件下で分解する可能性があります。
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩はどの業界で使用されていますか?
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩は、医薬業界、ポリマー業界、センサー業界、半導体業界などで使用されています。この化合物は薬物開発の一部として...
氮卓斯汀杂质Eを取り扱う際の実験室安全事項は何ですか?
氮卓斯汀杂质E(CAS番号: 20526-97-0)を扱う際は、ゴーグルとシールド付きの手袋を使用し、漏洩がある場合はドラフトチャンバーを使用して処理することを...
デシシボチル-n-ブチルボルテゾミブはどのように保存すればよいですか?
デシシボチル-n-ブチルボルテゾミブは室温で保管し、直日光から遠ざけて密栓容器に保管することが推奨されます。
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.












![4-[2-(3,4-Dihydro-2H-chromen-6-yl)-1,3-oxazol-5-yl]-1-(3-{[(2,5-dioxo-1-pyrrolidinyl)oxy]carbonyl}benzyl)pyridinium bromide structure 4-[2-(3,4-Dihydro-2H-chromen-6-yl)-1,3-oxazol-5-yl]-1-(3-{[(2,5-dioxo-1-pyrrolidinyl)oxy]carbonyl}benzyl)pyridinium bromide structure](https://static.chemtradehub.com/structs/155/155863-03-9-8183.webp)

