EXAFS and XRD characterization of palladium sorbents for high temperature mercury capture from fuel gas
文献情報
Stephen Poulston, Timothy I. Hyde, Hugh Hamilton, Olivier Mathon, Carmelo Prestipino, Andrew W. J. Smith
Removal of pollutants such as mercury at elevated temperatures provides improvements in the overall thermal efficiency during the process of coal gasification. The two high temperature sorbents studied were 5 wt% Pd/Al2O3 and 5 wt% Pd/SiO2: materials shown to have significantly different Hg adsorption capacities. A combination of XRD and EXAFS has been used to characterize the Pd–Hg alloy formed when these Pd-based sorbents were exposed to fuel gas (CO, CO2, H2) containing Hg vapour at 204 °C. Significant differences were found in the nature of the alloy formed on the two sorbents following Hg exposure. The Pd/Al2O3 sorbent produced a single homogeneous solid solution of Pd–Hg whilst the silica-supported Pd produced an alloy of varying composition.
関連文献
Photocatalytic decomposition of benzene over TiO2 in a humidified airstream
DOI: 10.1039/A906214I
Does the cationic or the radical character dominate the reactivity of alkene radical cations towards solvent molecules?‡
M. Mohr, H. Zipse
DOI: 10.1039/B007990L
On the structure of the monohydrated superoxide molecular anion, O2-·(H2O). An abinitio molecular orbital study
DOI: 10.1039/A904184B
Adsorption in an ordered and non-interconnected mesoporous material: Single crystal porous silicon
N. Dupont-Pavlovsky
DOI: 10.1039/B009105G
Rate constants for H and OH attack on propanone, butanone and pentan-3-one at 753 K, and the oxidation chemistry of the radicals formed
R. S. Tranter, R. W. Walker
DOI: 10.1039/B009378P
Myers–Saito and Schmittel cyclization of hepta-1,2,4-triene-6-yne: A theoretical REKS study
Sam P. de Visser, Michael Filatov, Sason Shaik
DOI: 10.1039/B009965L
Aspects of the kinetics and mechanism of the gas-phase reactions of ozone with conjugated dienes
Alison G. Lewin, David Johnson, David W. Price, George Marston
DOI: 10.1039/B010006O
Unimolecular isomerization/decomposition of ortho-benzyne: abinitio MO/statistical theory study
DOI: 10.1039/A902883H
Surface characterization of alumina-supported catalysts prepared by sol–gel method. Part II.—Surface reactivity with CO
Emmanuel Joubert, Jean-Christophe Ménézo, Daniel Duprez, Jacques Barbier, Nicolas Bion, Marco Daturi, Jacques Saussey, Jean-Claude Lavalley, Hideaki Hamada
DOI: 10.1039/B009956M
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














