Formation entropies of intrinsic point defects in cubic In2O3 from first-principles density functional theory calculations
文献情報
Péter Ágoston, Karsten Albe
Entropy contributions to the Gibbs free energy of defect formation of vacancies and interstitials in cubic In2O3 are calculated by means of first-principles calculations. We employ the supercell formalism together with a pseudo-potential and plane-wave based density functional method for the force calculations. Our results suggest that temperature-dependent contributions to the Gibbs free energies of defect formation can rise to 1.4 eV at 1000 K and therefore cause variations in the predicted defect equilibria as compared to calculations based on static energy data. We thoroughly discuss elastic contributions to the defect formation entropy at constant volume or pressure and address the correct treatment of an entropy reservoir for a binary system. Finally, we investigate the temperature dependence of the defect formation entropy and compare this to the usual high-temperature approximation.
関連文献
Covalent capture of supramolecular species in an aqueous solution of water-miscible small organic molecules
Yongchao Yao, Chuanqi Li, Fangqin Liu, Pengxiang Zhao
DOI: 10.1039/C9CP01427F
Density functional approach to the description of the structure of dimer nanoparticles at liquid–liquid interfaces
Stefan Sokołowski, Orest Pizio
DOI: 10.1039/C9CP01087D
Non-equilibrium adatom thermal state enables rapid additive nanomanufacturing
Matthew R. Henry, Songkil Kim
DOI: 10.1039/C9CP01478K
Improving the accuracy of Cu(ii)–nitroxide RIDME in the presence of orientation correlation in water-soluble Cu(ii)–nitroxide rulers
Irina Ritsch, Henrik Hintz, Gunnar Jeschke, Adelheid Godt, Maxim Yulikov
DOI: 10.1039/C8CP06573J
Response of adhesive polymer interfaces to repeated mechanical loading and the spatial variation of diffusion coefficient and stresses in a deforming polymer film
Jeeno Jose, Narasimhan Swaminathan
DOI: 10.1039/C9CP00576E
Redox-probe-free scanning electrochemical microscopy combined with fast Fourier transform electrochemical impedance spectroscopy
Aušra Valiūnienė, Jurate Petroniene, Georgi Popkirov, Almira Ramanaviciene, Arunas Ramanavicius
DOI: 10.1039/C9CP00187E
Role of native defects and the effects of metal additives on the kinetics of magnesium borohydride
Di Wang, Fusheng Yang, Zhen Wu, Le Wu, Zaoxiao Zhang
DOI: 10.1039/C9CP01467E
DEER distance measurements on trityl/trityl and Gd(iii)/trityl labelled proteins
Angeliki Giannoulis, Yin Yang, Yan-Jun Gong, Xiaoli Tan, Akiva Feintuch, Raanan Carmieli, Thorsten Bahrenberg, Yangping Liu, Xun-Cheng Su, Daniella Goldfarb
DOI: 10.1039/C8CP07249C
Alkaline manganese electrochemistry studied by in situ and operando spectroscopic methods – metal dissolution, oxide formation and oxygen evolution
Martin Rabe, Cigdem Toparli, Ying-Hsuan Chen, Olga Kasian
DOI: 10.1039/C9CP00911F
High-speed tracking of fast chemical precipitations
Réka Zahorán, Ákos Kukovecz, Ágota Tóth, Dezső Horváth, Gábor Schuszter
DOI: 10.1039/C9CP01707K
こちらもおすすめ
2-氟-4-イオドベンzo酸エチルエステルを取り扱う際の実験室安全事項は何ですか?
2-氟-4-イオドベンzo酸エチルエステルは有機溶媒を用いた反応であり、ドラフトチャンバーでの操作が必要です。漏洩時にはSDS参照の安全措置を講じ、PPE(防護...
血根碱の主な用途は何ですか?
血根碱は主に医薬分野で利用され、抗炎症や抗がん剤としての潜在的な効果が研究されています。また、化学研究や薬物開発において、新しい薬剤設計の参考となる化合物として...
Methyl 3-methoxythiophene-2-carboxylateの主な用途は何ですか?
Methyl 3-メトキシスチフェン-2-カルボン酸メチルエステルは、薬品合成、染料製造、以及合成中間体としての用途が広がっています。
丹磺酰-L-亮氨酸はどのように保存すればよいですか?
丹磺酰-L-亮氨酸は乾燥した場所で、直射日光から保護し、低温(室温以下)で保存してください。密閉容器に入れて保管することをおすすめします。
5-(苄氧基)ピラミジン-4-アミンの代替品はありますか?
5-(苄氧基)ピラミジン-4-アミンの代替品として、6-メトキシピラミジンや5-フェニルピラミジンなどが挙げられます。これらの化合物は、5-(苄氧基)ピラミジン...
8-ヒドロキシノルデコペントアセートの物理化学的性質は何ですか?
8-ヒドロキシノルデコペントアセートはCAS番号84807-87-4の化合物で、分子量は750.02 uです。これは油溶性で、水に溶けにくい特徴があります。反応...
tert-ブチル(エス)-1-ヒドロキシペンタ-4-エン-2-イルカルバamateの主な用途は何ですか?
tert-ブチル(エス)-1-ヒドロキシペンタ-4-エン-2-イルカルバamateは主に医薬品の合成材料や分析化学の試薬として使用されます。
ブコール-L-2-フローヨルブリンについて適切な法規ガイドラインは何ですか?
ブコール-L-2-フローヨルブリン(CAS番号: 1196107-73-9)は、GHS(グローバルハザードアサessmentシステム)に基づく危害分類と表示が求...
6-ブロモ-N-環丙基-2-ピリジニニメタンの市場動向や研究トレンドはどうですか
6-ブロモ-N-環丙基-2-ピリジニニメタンは、薬理学研究や合成化学に使用される化合物であり、特に抗ウイルス薬や抗がん薬の開発に注目されています。市場では、薬物...
RS-AMPÀはどのように保存すればよいですか?
RS-AMPÀは、遮光容器に保存し、室温(15〜25℃)で保管することが推奨されます。高湿や熱は物質を劣化させるため、湿度は50%以下に保つことが重要です。また...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![4-[2-(Trichlorosilyl)ethyl]benzenesulfonyl chloride structure 4-[2-(Trichlorosilyl)ethyl]benzenesulfonyl chloride structure](https://static.chemtradehub.com/structs/797/79793-00-3-de16.webp)

![(1R)-3-Bromo-1,7,7-trimethylbicyclo[2.2.1]heptan-2-one structure (1R)-3-Bromo-1,7,7-trimethylbicyclo[2.2.1]heptan-2-one structure](https://static.chemtradehub.com/structs/102/10293-06-8-dd8a.webp)