One-step synthesis of low polydispersity, biotinylated poly(N-isopropylacrylamide) by ATRP
文献情報
Debora Bontempo, Ronald C. Li, Tiffany Ly, Carrie E. Brubaker, Heather D. Maynard
Low polydispersity poly(N-isopropylacrylamide) with a biotin end-group was obtained in one step from a biotinylated initiator for atom transfer radical polymerization and interacted with streptavidin to generate the thermosensitive polymer–protein conjugate.
関連文献
A scalable twin surface dielectric barrier discharge system for pollution remediation at high gas flow rates
Alexander Böddecker, Arisa Bodnar, Lars Schücke, Jonas Giesekus, Katja Wenselau, Ryan T. Nguyen-Smith, Timothy Oppotsch, Christian Oberste-Beulmann, Martin Muhler, Peter Awakowicz
DOI: 10.1039/D2RE00167E
Kilo-scale synthesis and purification of 4,4′-[di-t-butyldibenzo]-18-crown-6 and its catalytic reduction to 4,4′-[di-t-butyldicyclohexano]-18-crown-6
Snehasis Dutta, Trilochan Gadly, Amey P. Wadawale, Mayur Darekar, Sulekha Mukhopadhay, Sunil K. Ghosh, Birija S. Patro
DOI: 10.1039/D2RE00047D
3D-printed capillary force trap reactors (CFTRs) for multiphase catalytic flow chemistry
David M. Walker, Joel M. Hawkins, Saif A. Khan
DOI: 10.1039/D1RE00462J
An investigation on PANI/NENP-1 composite as a novel photocatalyst for photocatalytic dye wastewater degradation and photocatalytic hydrogen evolution
Heling Zhang, Huaizhi Yang, Zhiquan Pan, Qingrong Cheng
DOI: 10.1039/D2RE00086E
The assembly of integrated continuous flow platform for on-demand rosiglitazone and pioglitazone synthesis
DOI: 10.1039/D2RE00228K
A novel observation platform for determining the micro-dispersion performance in practical reaction systems
Jing Song, Chencan Du, Junjie Wang, Yongjin Cui, Yujun Wang, Jian Deng, Guangsheng Luo
DOI: 10.1039/D2RE00224H
Effect of acid distribution and pore structure of ZSM-5 on catalytic performance
Runze Jin, Ke Ma, Shutao Xu, Yingxu Wei, Lijuan Song, Zhijun Li, Penghui Zhang, Yufeng Wang, Jiaofei Wang, Zhuangzhuang Zhang, Haobin Hu, Chengyi Dai, Xinwen Guo
DOI: 10.1039/D2RE00065B
Effect of the nickel impregnation method on clay supports in the hydroconversion reaction of n-decane
Jahaziel Amaya, Cesar Calderón, Rafael Molina, Sonia Moreno
DOI: 10.1039/D2RE00353H
Revisiting aromatic diazotization and aryl diazonium salts in continuous flow: highlighted research during 2001–2021
Jianli Chen, Xiaoxuan Xie, Jiming Liu, Zhiqun Yu, Weike Su
DOI: 10.1039/D2RE00001F
こちらもおすすめ
噻奈普汀乙酯の物理化学的性質は何ですか?
CAS番号66981-77-9の噻奈普汀乙酯は、結晶性白色粉末であり、分子量は476.9 g/molです。この化合物は水に溶けにくく、一般的には有機溶媒で溶解し...
アミピシリン不純物Fとは何ですか?
アミピシリン不純物Fは、CAS番号124774-48-7の化合物です。これは、抗生物質アミピシリンの生産過程で生成される不純物の一つであり、(4S)-2-({[...
イリジウム(I)ヘキサフルオロフォスファートの代替品はありますか?
イリジウム(I)ヘキサフルオロフォスファートの代替品として、他の有機金属化合物や非有機金属化合物が使用されることがあります。具体的には、ダイゾニウム塩や他の金属...
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物はどのように処理すべきですか?
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物は、安全な方法で処理する必要があります。まず、廃棄物を適切な容器に収集し、避けて保管します。次に、専門の廃棄処理業者...
2-甲基辛-1-醇を取り扱う際の実験室安全事項は何ですか?
取り扱う際は、密閉のゴーグルと手袋を着用することが推奨されます。ドラフトチャンバーを使用し、漏洩時には速やかに取り扱いを中止し、適切な排気設備を使用してください...
3α-アセトキノイドコレステロールエステルはどのように保存すればよいですか?
3α-アセトキノイドコレステロールエステルは、常温から低温(0-5℃)の暗所で保存し、密閉容器に入れることで安定性を保つことが推奨されます。また、湿気や酸素から...
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸の主な用途は何ですか?
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸は、化学合成の触媒としての使用や、医薬品の合成材料としての役割があります。また、特定の合成路線で使用...
(2S,3R)-2-氨基-3-甲基丁二酸はどのように合成されますか?
(2S,3R)-2-氨基-3-甲基丁二酸は、2-ヒドロキシ-3-メチル丁酸とアミノ化反応を行うことで合成されます。触媒としてジクロロメタンが使用され、選択性と収...
1-Benzyl-2-phenyl-1H-imidazoleはどのように保存すればよいですか?
この化合物は常温で避けてください。直射日光を避け、密閉容器で保存し、湿気を防水の容器に入れて保管してください。
掲載誌
Chemical Communications

ChemComm publishes urgent research which is of outstanding significance and interest to experts in the field, while also appealing to the journal’s broad chemistry readership. Our communication format is ideally suited to short, urgent studies that are of such importance that they require accelerated publication. Our scope covers all topics in chemistry, and research at the interface of chemistry and other disciplines (such as materials science, nanoscience, physics, engineering and biology) where there is a significant novelty in the chemistry aspects. Major topic areas covered include: Analytical Chemistry Catalysis Chemical Biology and medicinal chemistry Computational Chemistry and Machine Learning Energy and sustainable chemistry Environmental Chemistry Green Chemistry Inorganic Chemistry Materials Chemistry Nanoscience Organic Chemistry Physical Chemistry Polymer Chemistry Supramolecular Chemistry














