Very high pressure HPLC with 1 mm id columns
文献情報
Luis A. Colón, José M. Cintrón, Jason A. Anspach, Adam M. Fermier, Kelly A. Swinney
Theoretical calculations and experimental data indicate that very high pressure HPLC can be performed using 1 and 1.5 mm id columns, and contrary to previous beliefs, the frictional heating generated does not appear to be detrimental to the separation.
関連文献
How to make membrane distillation greener: a review of environmentally friendly and sustainable aspects
Emilia Gontarek-Castro, Roberto Castro-Muñoz
DOI: 10.1039/D3GC03377E
New insights into the synthesis of Sillén–Aurivillius oxyhalides: molten salts induce interlayer halogen competing reaction
Chenliang Zhou, Shishi Xu, Zhichao Mu, Wei Chen, Zhili Chen, Xiangyu Cheng
DOI: 10.1039/D3TA05438A
Advanced engineering strategies for Li2S cathodes in lithium–sulfur batteries
Guowei Gao, Xiaochen Yang, Jingxuan Bi, Wanqing Guan, Zhuzhu Du
DOI: 10.1039/D3TA06057H
Unveiling the magnetic ordering effect in La-doped Ti3C2O2 MXenes on electrocatalytic CO2 reduction
Peng Zhang
DOI: 10.1039/D3TA06457C
Exploring finite-temperature electronic transport in CoSi alloys with transition metals (Cr, Mn, Fe, and Ni) using the KKR-CPA method
Ho Ngoc Nam, Katsuhiro Suzuki
DOI: 10.1039/D3TA06259G
Suppressing pre-aggregation to increase polymer solar cell ink shelf life
Zhen Wang, Zhengxing Peng, Nrup Balar, Harald Ade
DOI: 10.1039/D3TA06617G
Advanced electrolyte with high stability and low-temperature resistance for zinc-ion batteries
Qixian Bai, Qi Meng, Weiping Liu, Wenjun Lin, Pengfei Yi, Jingjing Tang, Guilin Zhang, Penghui Cao, Juan Yang
DOI: 10.1039/D3TA05052A
Modulating structures to decouple thermoelectric transport leads to high performance in polycrystalline SnSe
Yuping Wang, Shulin Bai, Haonan Shi, Qian Cao, Bingchao Qin, Li-Dong Zhao
DOI: 10.1039/D3TA06373A
The structural, energetic and dehydrogenation properties of pure and Ti-doped Mg(0001)/MgH2(110) interfaces
Bo Han, Yuxiao Jia, Jianchuan Wang, Xuezhang Xiao, Lixin Chen, Lixian Sun, Yong Du
DOI: 10.1039/D3TA06177A
こちらもおすすめ
噻奈普汀乙酯の物理化学的性質は何ですか?
CAS番号66981-77-9の噻奈普汀乙酯は、結晶性白色粉末であり、分子量は476.9 g/molです。この化合物は水に溶けにくく、一般的には有機溶媒で溶解し...
アミピシリン不純物Fとは何ですか?
アミピシリン不純物Fは、CAS番号124774-48-7の化合物です。これは、抗生物質アミピシリンの生産過程で生成される不純物の一つであり、(4S)-2-({[...
イリジウム(I)ヘキサフルオロフォスファートの代替品はありますか?
イリジウム(I)ヘキサフルオロフォスファートの代替品として、他の有機金属化合物や非有機金属化合物が使用されることがあります。具体的には、ダイゾニウム塩や他の金属...
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物はどのように処理すべきですか?
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物は、安全な方法で処理する必要があります。まず、廃棄物を適切な容器に収集し、避けて保管します。次に、専門の廃棄処理業者...
2-甲基辛-1-醇を取り扱う際の実験室安全事項は何ですか?
取り扱う際は、密閉のゴーグルと手袋を着用することが推奨されます。ドラフトチャンバーを使用し、漏洩時には速やかに取り扱いを中止し、適切な排気設備を使用してください...
3α-アセトキノイドコレステロールエステルはどのように保存すればよいですか?
3α-アセトキノイドコレステロールエステルは、常温から低温(0-5℃)の暗所で保存し、密閉容器に入れることで安定性を保つことが推奨されます。また、湿気や酸素から...
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸の主な用途は何ですか?
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸は、化学合成の触媒としての使用や、医薬品の合成材料としての役割があります。また、特定の合成路線で使用...
(2S,3R)-2-氨基-3-甲基丁二酸はどのように合成されますか?
(2S,3R)-2-氨基-3-甲基丁二酸は、2-ヒドロキシ-3-メチル丁酸とアミノ化反応を行うことで合成されます。触媒としてジクロロメタンが使用され、選択性と収...
1-Benzyl-2-phenyl-1H-imidazoleはどのように保存すればよいですか?
この化合物は常温で避けてください。直射日光を避け、密閉容器で保存し、湿気を防水の容器に入れて保管してください。
掲載誌
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.












![4-(4-{4-[4-Fluoro-3-(trifluoromethyl)phenyl]-1-methyl-1H-imidazol-2-yl}-1-piperidinyl)-1H-pyrazolo[3,4-d]pyrimidine 4-methylbenzenesulfonate (1:1) structure 4-(4-{4-[4-Fluoro-3-(trifluoromethyl)phenyl]-1-methyl-1H-imidazol-2-yl}-1-piperidinyl)-1H-pyrazolo[3,4-d]pyrimidine 4-methylbenzenesulfonate (1:1) structure](https://static.chemtradehub.com/structs/108/1082949-68-5-00b6.webp)

![2,2'-[(Abieta-8,11,13-trien-18-ylimino)bis(2,1-ethanediyloxy)]diethanol structure 2,2'-[(Abieta-8,11,13-trien-18-ylimino)bis(2,1-ethanediyloxy)]diethanol structure](https://static.chemtradehub.com/structs/513/51344-62-8-8518.webp)