Preparation of single-stranded PCR products for electrospray ionization mass spectrometry using the DNA repair enzyme lambda exonuclease
文献情報
Allison P. Null, James C. Hannis, David C. Muddiman
Electrospray ionization mass spectrometry (ESI-MS) has been utilized to obtain accurate mass measurements of intact PCR products; however, single-stranded PCR products are necessary to detect sequence modifications such as base substitutions, additions or deletions. The locations of these modifications can subsequently be determined using additional stages of mass spectrometry. The recombinant enzyme lambda exonuclease selectively digests one strand of a DNA duplex from a 5′ phosphorylated end leaving the complementary strand intact. Using this rapid enzymatic step, we were able to produce single-stranded PCR products by digestion of an intact PCR product derived from the Human Tyrosine Hydroxylase (HUMTHO1) gene, which contains a tetrameric repeating motif. The non-template directed 3′ adenylation common when using Taq polymerase resulted in three distinct species (blunt-ended, mono-adenylated and di-adenylated), which added complexity to the spectrum of the double-stranded product. The data from the single-stranded products shows that one strand is preferentially adenylated over the other, which cannot be determined from the mass spectrum of the double-stranded PCR product alone. The ESI-FTICR (Fourier transform ion cyclotron resonance) mass spectra of the lambda exonuclease treated PCR products exhibited less than expected signal-to-noise (S/N) ratios. This is attributed to inaccurate concentration calculations due to remaining double-stranded PCR product amplified with unphosphorylated primers, and to matrix effects contributed by the lambda exonuclease reaction buffer. To further test this hypothesis, we investigated and determined the limit of detection to be 0.27 μM using standard curve statistics for single acquisitions of a synthetic 75-mer. The concentrations of the noncoding and coding strands produced by lambda exonuclease digestion were calculated to be 0.29 and 0.37 μM, respectively, taking into account the presence of double-stranded product. The products were electrosprayed from concentrations at the limit of detection requiring the averaging of 5–10 acquisitions to produce a sufficient S/N ratio, indicating that product concentration, base composition and matrix effects play a combined, significant role in detection of lambda exonuclease treated PCR products. Although additional work will be required to further exploit this strategy, lambda exonuclease clearly provides mass spectrometrists with a method to generate single-stranded PCR products.
関連文献
Enhanced electrical properties and field emission characteristics of AZO/ZnO-nanowire core–shell structures
Jheng-Ming Huang, Shang-You Tsai, Ching-Shun Ku, Chih-Ming Lin, San-Yuan Chen
DOI: 10.1039/C6CP01011C
Non-injection synthesis of monodisperse Cu–Fe–S nanocrystals and their size dependent properties
Grzegorz Gabka, Piotr Bujak, Jan Żukrowski, Damian Zabost, Kamil Kotwica, Karolina Malinowska, Andrzej Ostrowski, Ireneusz Wielgus, Wojciech Lisowski, Janusz W. Sobczak, Adam Pron
DOI: 10.1039/C6CP01887D
Correlating structure and electronic band-edge properties in organolead halide perovskites nanoparticles
Qiushi Zhu, Alexander Generalov, Dörthe Haase, Stefan Carlson, Yuran Niu, Jimmy Heimdal, Anders Engdahl, Maria E. Messing, Tonu Pullerits
DOI: 10.1039/C6CP01843B
Phase transitions in hydrophobe/phospholipid mixtures: hints at connections between pheromones and anaesthetic activity
Silvia Borsacchi, Marco Geppi, Sara Macchi, Emiliano Fratini, Moira Ambrosi
DOI: 10.1039/C6CP00659K
Analysis of the magnetically induced current density of molecules consisting of annelated aromatic and antiaromatic hydrocarbon rings
Dage Sundholm, Raphael J. F. Berger, Heike Fliegl
DOI: 10.1039/C6CP01968D
From dilute isovalent substitution to alloying in CdSeTe nanoplatelets
Ron Tenne, Miri Kazes, Sandrine Ithurria, Lothar Houben, Brice Nadal, Dan Oron, Benoit Dubertret
DOI: 10.1039/C6CP01177B
Understanding the STM images of epitaxial graphene on a reconstructed 6H-SiC(0001) surface: the role of tip-induced mechanical distortion of graphene
Jacques Cousty, Christophe Lubin, François Thoyer
DOI: 10.1039/C5CP07571H
Chemical vapor deposition of MoS2 layers from Mo–S–C–O–H system: thermodynamic modeling and validation
Sukanya Dhar, V. Kranthi Kumar, Tanushree H. Choudhury, S. A. Shivashankar, S. Raghavan
DOI: 10.1039/C6CP01617K
Electrochemical activity and high ionic conductivity of lithium copper pyroborate Li6CuB4O10
Mohamed Ben Hassine
DOI: 10.1039/C6CP01581F
こちらもおすすめ
6-(三氟甲基)喹啉二甲酸とは何ですか?
6-(三氟甲基)喹啉二甲酸は、CAS番号849818-58-2の化合物です。これは6位に三氟甲基が置換された2-quinolinecarboxylic酸と呼ばれ...
tert-butyl 4-ヒドロキシ-4-メチルázepane-1-カーボキセイランを含む廃棄物はどのように処理すべきですか?
この化合物の廃棄物は、適切な容器で密封し、避光し、低温かつ乾燥した環境で保管してください。処理には専門の廃棄処理会社のサービスを活用するか、地元の環境保護法に従...
TIPAを取り扱う際の実験室安全事項は何ですか?
TIPAは揮発性が低く、毒性は低いですが、操作中の注意が必要です。PPE(個人防護具)を着用し、ドラフトチャンバー内で取り扱い、漏洩した場合は即座にSDS(安全...
3-甲硫基苯硼酸频呐酯とは何ですか?
3-甲硫基苯硼酸频呐酯は、CAS番号710348-63-3の化合物で、化学式はC14H19BO2Sです。これは2-[3-(メチルサルファニル)フェニル]-4,4...
N-[2-(二甲氨基)乙基]-N-甲基甲酰胺は安全ですか?
N-[2-(二甲氨基)乙基]-N-甲基甲酰胺は安全ではありません。吸入、皮膚接触、目接触は避けてください。稀な過剰反応やアレルギー反応がある可能性があります。適...
甲基丙烯酸甲瓦龙酸内酯とは何ですか?
CAS番号177080-66-9の化合物、4-メチル-2-オキトテトラヒドロ-2H-ピラノ-4-イルメタクリレートは、甲基丙烯酸の一種です。この化合物は透明な液...
2-メチルフェンチアルデヒドを取り扱う際の実験室安全事項は何ですか?
2-メチルフェンチアルデヒドは易燃物質であり、火気の使用や高温に注意が必要です。PPE(個人保護具)として、ゴーグルや手袋を使用し、ドラフトチャンバーを使用して...
2,4,6-三氯-5-氟嘧啶はどの業界で使用されていますか?
2,4,6-三氯-5-氟嘧啶は医薬品産業で広く使用されており、抗真菌薬や抗ウイルス薬の前駆体として機能します。また、高次元材料やセンサー技術の分野でも応用されて...
(S)-2-((叔丁氧基羰基)氨基)-3-(((2-苯基乙酰胺基)甲基)硫基)丙酸とは何ですか?
CAS番号57084-73-8の(S)-2-((叔丁氧基羰基)氨基)-3-(((2-苯基乙酰胺基)甲基)硫基)丙酸は、特定の構造を持つ無機化合物で、主に医薬品や...
掲載誌
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.












![1-{2-[(4-Chlorobenzyl)sulfanyl]-2-(2,4-dichlorophenyl)ethyl}-1H-imidazole structure 1-{2-[(4-Chlorobenzyl)sulfanyl]-2-(2,4-dichlorophenyl)ethyl}-1H-imidazole structure](https://static.chemtradehub.com/structs/613/61318-90-9-6785.webp)
![1,4-Piperazinediylbis{[6-(1H-benzimidazol-2-yl)-2-pyridinyl]methanone} structure 1,4-Piperazinediylbis{[6-(1H-benzimidazol-2-yl)-2-pyridinyl]methanone} structure](https://static.chemtradehub.com/structs/191/1912399-75-7-b9f0.webp)
