Sulfonate compounds embraced from acid copper electroplating baths as innovative additives for alkaline Zn batteries

文献情報

出版日 2023-10-18
DOI 10.1039/D3TA04612E
インパクトファクター 12.732
著者

Katerina Bogomolov, Ekaterina Grishina


原文を見る

要旨

Nickel–zinc (Ni–Zn) batteries are rechargeable (secondary) aqueous batteries with high theoretical power density and a considerably low cost in addition to being safe and rather sustainable. Currently, the cycle life of these batteries is still insufficient to keep up with other common industrially available battery chemistries. This insufficiency is a result of dendrite formation, parasitic hydrogen evolution, corrosion, passivation, and dynamic character of morphology evolution. The application of electrolyte additives is a simple and cost-effective method to address these challenges and promote alternative beneficial layer-like morphologies. This work reports on the positive effects of additive combination, inspired by embracing and optimizing additives, originating from copper (Cu) electroplating in the very large system integrated (VLSI) microelectronic field. Here, we report on the vast impact of bis(sodium-sulfo-propyl) disulfide (SPS) and other sulfur-based derivatives, such as sodium 3-(dimethylcarbamothioylsulfanyl) propane-1-sulfonate (DPS) and 3-S-isothiuronium propyl sulfonate (UPS) on Zn deposition and growth morphology and hydrogen evolution and corrosion processes. Integrating the optimized additive-modified electrolyte into a full-cell assembly reveals that the unique combination of additives can reduce protrusion growth with a minimal polarization loss, resulting in an extended cycle life of the advanced Ni–Zn battery of up to 2000 cycles in a deep discharge regime.

関連文献

Delayed photodissociation of the tin cluster Sn22−

Alexander Jankowski, Paul Fischer, Klavs Hansen, Lutz Schweikhard

2023-12-15 Paper

DOI: 10.1039/D3CP04476A

An efficient particulate photocatalyst for overall water splitting based on scandium and magnesium co-doped strontium titanate

Riku Okamoto, Akira Kimura, Yuhi Nakayasu, Akira Yamakata, Ryota Tomizawa, Taizo Masuda, Koichiro Nakatani

2023-11-29 Paper

DOI: 10.1039/D3SE01408H

Dendrite-free deposition and side-reaction suppression of zinc anodes achieved via constructing synergistic interface buffer layers

Ting Li, Zhongfu Yan, Mengjiao Liu, Xinyu Liu, Liang Liu, Jiahao Chen, Jianping Long

2023-12-09 Paper

DOI: 10.1039/D3SE01334K

Peroxidase activity of a Cu–Fe bimetallic hydrogel and applications for colorimetric detection of ascorbic acid

Xiao-Juan Wang, Yan Long, Chuan-Wan Wei, Shu-Qin Gao

2023-12-05 Paper

DOI: 10.1039/D3CP05403A

Front cover

2024-01-16 Cover

DOI: 10.1039/D4SE90005G

Effect of substituting donors on the hole mobility of hole transporting materials in perovskite solar cells: a DFT study

Md Al Mamunur Rashid, Sein Min, Sung Keon Namgoong, Keunhong Jeong

2023-12-04 Paper

DOI: 10.1039/D3CP04310J

Effect of the charge rate on the mechanical response of composite graphite electrodes: in situ experiment and mathematical analysis

Hainan Jiang, Yaolong He, Xiaolin Li, Zhiyao Jin, Huijie Yu, Dawei Li

2023-11-23 Paper

DOI: 10.1039/D3CP04274J

Effect of a single methyl substituent on the electronic structure of cobaltocene studied by computationally assisted MATI spectroscopy

Sergey Yu. Ketkov, Sheng-Yuan Tzeng, Elena A. Rychagova, Anton N. Lukoyanov, Wen-Bih Tzeng

2023-12-05 Paper

DOI: 10.1039/D3CP05120J

Trapping and thermal migration of the first- and second-row atoms in Ar, Kr and Xe crystals

Iosif V. Leibin, Dmitry S. Bezrukov, Alexei A. Buchachenko

2023-11-15 Paper

DOI: 10.1039/D3CP04178F

Designed fabrication of MoS2 hollow structures with different geometries and the comparative investigation toward capacitive properties

Yuandong Xu, Haoyang Feng, Chaoyang Dong, Yuqing Yang, Meng Zhou, Yajun Wei, Hui Guo, Yaqing Wei, Jishan Su, Yingying Ben, Xia Zhang

2023-11-25 Paper

DOI: 10.1039/D3CP05196J

こちらもおすすめ

化合物よくある質問

2-メトキシ-4-(メチルスルフィニル)アミンの主な用途は何ですか?

2-メトキシ-4-(メチルスルフィニル)アミンは、主に医薬品および農薬の製造に使用されます。また、合成化学の一部として研究用材料としても利用されます。

41608-73-52-Methoxy-4-(methyls...
化合物よくある質問

4-溴甲基-3-甲氧基苯甲酸は安全ですか?

安全ではありません。触覚や吸入に注意が必要で、適切な防護具を使用してください。

118684-13-24-(Bromomethyl)-3-me...
化合物よくある質問

4,6-二氯-N-甲基ピラミジンアミンの代替品はありますか?

代替品としては、4,6-二クロロピラミジンアミンや他のピラミジン系化合物が考えられます。ただし、目的と用途によって最適な代替品は異なります。

10397-15-64,6-Dichloro-N-methy...
化合物よくある質問

6-氯-4-甲基-1H-吲哚を含む廃棄物はどのように処理すべきですか?

6-氯-4-甲基-1H-吲哚の廃棄物は、適切な容器に収集し、密閉して保管します。温度は常温、湿度は低く、直射日光を避けて保管することを推奨します。廃棄処理は専門...

885520-84-36-chloro-4-methyl-1H...
化合物よくある質問

2-フローユロ-4-(トリフルオロメチル)ベンゾイドについて「に適用される法規ガイドラインは何ですか」

2-フローユロ-4-(トリフルオロメチル)ベンゾイドのCAS番号は207974-08-1です。この化合物はGHS分類で毒性物質と有害な反応物質として分類されます...

207974-08-1[2-Fluoro-4-(trifluo...
化合物よくある質問

4-ニトロフェニルN-[(ベンゼルオキシルカーボンイル]グリシングリシングリシン酸はどのように保存すればよいですか?

4-ニトロフェニルN-[(ベンゼルオキシルカーボンイル]グリシングリシングリシン酸は、室温で暗所に保管し、乾燥した環境で保存することを推奨します。容器は密閉性の...

19811-64-44-Nitrophenyl N-[(be...
化合物よくある質問

イソデスロラタドリンの代替品はありますか?

イソデスロラタドリンの代替品としては、デスロラタドリンや他の抗ヒスタミン薬が挙げられます。具体的には、デスロラタドリン、ラセカミド、フェルタドリンなどが、症状や...

183198-49-4Iso Desloratadine
化合物よくある質問

5-甲氧基-1,2,3,4-四氢异喹啉盐酸盐はどのように合成されますか?

5-甲氧基-1,2,3,4-四氢异喹啉盐酸盐の一般的な合成方法は、メタノール中で5-メトキシ-1,2,3,4-四ヒュドロイソキシンを塩酸で塩化します。この反応で...

103030-69-95-Methoxy-1,2,3,4-te...
化合物よくある質問

4-アミノ-5-メトキシ-2-トルエンサルホニック酸についての法規ガイドラインは何ですか?

CAS番号6471-78-9の4-アミノ-5-メトキシ-2-トルエンサルホニック酸は、GHS分類では corrosive(腐食性)と識別されます。EUのREAC...

6471-78-94-Amino-5-Methoxy-2-...
化合物よくある質問

甲基孕酮を取り扱う際の実験室安全事項は何ですか?

甲基孕酮の取り扱いは、PPE(個人保護具)の使用が必要な重要な安全事項を伴います。防塵マスク、ゴーグル、手袋を着用することが推奨されます。ドラフトチャンバーを使...

204063-33-22-[(Diphenylmethyl)a...

掲載誌

Journal of Materials Chemistry A

Journal of Materials Chemistry A
CiteScore: 19.5
自己引用率: 4.7%
年間論文数: 2211

Journal of Materials Chemistry A, B & C cover high quality studies across all fields of materials chemistry. The journals focus on those theoretical or experimental studies that report new understanding, applications, properties and synthesis of materials. The journals have a strong history of publishing quality reports of interest to interdisciplinary communities and providing an efficient and rigorous service through peer review and publication. The journals are led by an international team of Editors-in-Chief and Associate Editors who are all active researchers in their fields. Journal of Materials Chemistry A, B & C are separated by the intended application of the material studied. Broadly, applications in energy and sustainability are of interest to Journal of Materials Chemistry A, applications in biology and medicine are of interest to Journal of Materials Chemistry B, and applications in optical, magnetic and electronic devices are of interest to Journal of Materials Chemistry C. More than one Journal of Materials Chemistry journal may be suitable for certain fields and researchers are encouraged to submit their paper to the journal that they feel best fits for their particular article. Example topic areas within the scope of Journal of Materials Chemistry A are listed below. This list is neither exhaustive nor exclusive. Artificial photosynthesis Batteries Carbon dioxide conversion Catalysis Fuel cells Gas capture/separation/storage Green/sustainable materials Hydrogen generation Hydrogen storage Photocatalysis Photovoltaics Self-cleaning materials Self-healing materials Sensors Supercapacitors Thermoelectrics Water splitting Water treatment

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。