2D layered double hydroxides and transition metal dichalcogenides for applications in the electrochemical production of renewable hydrogen
文献情報
Daniele Alves, P. Rupa Kasturi, Gillian Collins, Tara N Barwa, Sukanya Ramaraj, Raj Karthik
The effects of Climate Change are now clearly evident across the world, with increasing storms, precipitation, rising sea levels and draughts, with an ever increasing need to develop energy storage and conversion approaches and devices to alleviate these issues. Hydrogen has emerged as a clean fuel with no environmental issues and it can be coupled with renewable energy sources such as wind, solar and wave energy. The excess energy from renewables can be employed to power electrolysis cells giving rise to green or renewable hydrogen. This approach is attracting considerable attention as it has the potential not only to provide a very clean energy source, but it also enables more efficient use of renewable energy resources. One of the limiting factors in achieving high volumes of pure hydrogen is the electrocatalytic materials used for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). In this review, we cover the progress made largely within the last six years in the development of two materials that satisfy the conditions of being cost-effective, earth-abundant, simple to form with little or no environmental concerns. The two materials are transition metal dichalcogenides (TMDs) and layered double hydroxides (LDHs), with the latter often described as clays. Following a short overview of the main synthetic methods used to form the TMDs and LDHs, and a short introduction to the HER and OER, the performance of different LDHs, TMDs and their composites in the electrochemical splitting of water, and as bifunctional electrodes is discussed. Finally, the ability of these materials to act as electrocatalysts in seawater electrolysis and to serve as electrocatalytic materials for the oxidation of alternative half-reactions to the sluggish OER is reviewed. Although more studies are required, it is clear that these earth-abundant materials are promising electrocatalysts for the generation of renewable hydrogen.
おすすめジャーナル

Russian Journal of Coordination Chemistry

Journal of Saudi Chemical Society

New Journal of Chemistry

Nature Medicine

Russian Chemical Bulletin

Acta Materialia

Chemistry Education Research and Practice

Russian Journal of Organic Chemistry

Russian Journal of Applied Chemistry

Current Opinion in Solid State & Materials Science
関連文献
A novel mesoporous carbon@silicon–silica nanostructure for high-performance Li-ion battery anodes
Chaohe Xu, Jianqiang Luo, Wei Wu, Jianlin Shi
DOI: 10.1039/C4CC03545C
The preparation and mechanistic study of highly effective PtSnRu ternary nanorod catalysts toward the ethanol oxidation reaction
Tzu-Hsi Huang, Hong-Sheng Zheng, Yih-Ming Cheng, Chen-Wei Liu, Sheng-Wei Lee, Jeng-Han Wang, Kuan-Wen Wang
DOI: 10.1039/C9SE00474B
Single step additive manufacturing (3D printing) of electrocatalytic anodes and cathodes for efficient water splitting
Pãmyla L. dos Santos, Juliano A. Bonacin, Edmund M. Keefe
DOI: 10.1039/C9SE00679F
Immobilization of a molecular catalyst on carbon nanotubes for highly efficient electro-catalytic water oxidation
Fusheng Li, Lin Li, Lianpeng Tong, Quentin Daniel, Mats Göthelid
DOI: 10.1039/C4CC06959E
Orientationally engineered 2D/3D perovskite for high efficiency solar cells
Jinaqi Zhang, Boxin Wang, Rashid Ahmad
DOI: 10.1039/C9SE00817A
Minimising the levelised cost of electricity for bifacial solar panel arrays using Bayesian optimisation
Christiane Becker
DOI: 10.1039/C9SE00750D
Highly mesoporous Fe and N Co-doped graphitic catalysts prepared from short-time synthesis of precursor towards highly efficient oxygen reduction
Zu Zhong Gan, Zhao Min Sheng, Huan Huang, Xian You Dai, Rui Liang Niu, Run Ping Jia
DOI: 10.1039/C9SE00532C
A perspective on practical solar to carbon monoxide production devices with economic evaluation
Sung Gyu Han, Honggon Kim, Jongwon Ko, Sejin Park, Oh-Shim Joo, Yoonmook Kang
DOI: 10.1039/C9SE00647H
Electrochemical hydrogen production on a metal-free polymer
Roudabeh Valiollahi, Mikhail Vagin, Viktor Gueskine, Amritpal Singh, Sergey A. Grigoriev, Xianjie Liu, Ziyauddin Khan
DOI: 10.1039/C9SE00687G
An iron foam acts as a substrate and iron source for the in situ construction of a robust transition metal phytate electrocatalyst for overall water splitting
Xiaojuan Chen, Yan Meng, Taotao Gao, Jinmei Zhang, Xiaoqin Li, Hongyan Yuan
DOI: 10.1039/C9SE00348G
こちらもおすすめ
オステニ二甲磺酸塩に適用される法規ガイドラインは何ですか?
オステニ二甲磺酸塩は、GHS分類に基づき corrosive 物質として分類されます。REACH規則では、該当物質の登録が要求される可能性があります。また、FD...
環丁基肼盐酸盐は安全ですか?
環丁基肼盐酸盐は毒性があり、吸入や皮膚接触は有害です。使用時の安全対策として、密閉システムを使用し、適切な排気設備を備えた場所で作業することが推奨されます。
N-(4-パリドン基ソニルフェニル)硫代イソシアネートを取り扱う際の実験室安全事項は何ですか?
N-(4-パリドン基ソニルフェニル)硫代イソシアネートは高毒性で、皮膚や吸入による毒性があります。取り扱う際は防毒マスク、保護用手袋、保護眼鏡などのPPEを着用...
5-ヒドロキシ-1,3-ジヒドロ-2H-インドン-2-酮の物理化学的性質は何ですか?
CAS番号3416-18-0の5-ヒドロキシ-1,3-ジヒドロ-2H-インドン-2-酮は、結晶性の白色粉末です。分子量は228.25であり、 aqueous m...
O-苄基-D-丝氨醇はどのように合成されますか?
O-苄基-D-丝氨醇は、D-アミノ酸とベンゼン環の経由で合成されます。触媒としてジメチルアミノピリジンが使用され、選択性は高いです。一般的な収率は約90%です。
ナトリウム3-ヒドロキシbutano酸とは何ですか?
ナトリウム3-ヒドロキシbutano酸は、CAS番号13613-65-5で登録されている化合物です。この化合物は、(3R)-3-ヒドロキシbutano酸とナトリ...
1-(二苯甲基)-4-甲基ベンゼンの物理化学的性質は何ですか?
CAS番号603-37-2の1-(二苯甲基)-4-甲基ベンゼンは、結晶性の固体で、分子量は244.28であり、水中的には微溶です。この化合物は有機反応において中...
ネアミン塩酸塩の物理化学的性質は何ですか?
ネアミン塩酸塩の分子量は321.19であり、結晶性の白色粉末です。この化合物は水に溶けやすく、pHが低くなると不溶性になります。反応活性は高く、水溶液中の酸化還...
偶氮二甲酰二哌啶の主な用途は何ですか?
偶氮二甲酰二哌啶は、医薬品、染料、高 Então 剤、触媒、溶媒、量論試薬など、様々な分野で使用されています。特に、高 Enough 反応において、グリコール酸...


![N-[2,6-Di(9-anthryl)-4-oxido-8,9,10,11,12,13,14,15-octahydrodinaphtho[2,1-d:1',2'-f][1,3,2]dioxaphosphepin-4-yl]-1,1,1-trifluoromethanesulfonamide structure N-[2,6-Di(9-anthryl)-4-oxido-8,9,10,11,12,13,14,15-octahydrodinaphtho[2,1-d:1',2'-f][1,3,2]dioxaphosphepin-4-yl]-1,1,1-trifluoromethanesulfonamide structure](https://static.chemtradehub.com/structs/122/1227374-64-2-cdb5.webp)


