Linker size dependent mechanical properties of di-imine based molecular crystals
文献情報
Deepak Manoharan, Shamim Ahmad, Srinu Tothadi, Franziska Emmerling, Biswajit Bhattacharya, Soumyajit Ghosh
Mechanically flexible molecular crystals have emerged as a fascinating class of materials with the ability to undergo substantial deformation without compromising their structural integrity. We report here four 3,5-di-tert-butyl salicylaldehyde based di-imine crystals. Crystals 1 and 2 were plastic while crystals 3 and 4 were brittle and elastic, respectively. By changing the length of the intervening linker molecule, structure and packing factors were influenced greatly resulting in the final outcome of mechanical properties. It is possible to fine-tune mechanical properties by changing the length of the linker moiety while keeping the peripheral shape synthons the same. These findings open up new avenues for tailoring the mechanical flexibility of molecular crystals, opening up opportunities for their application in various fields.
関連文献
A class of polysulfide catholytes for lithium–sulfur batteries: energy density, cyclability, and voltage enhancement
Xingwen Yu, Arumugam Manthiram
DOI: 10.1039/C4CP04895D
Pentaglyme–K salt binary mixtures: phase behavior, solvate structures, and physicochemical properties
Seiji Tsuzuki, Kazuhide Ueno, Masayoshi Watanabe
DOI: 10.1039/C4CP05017G
A facile one-pot method to synthesize a three-dimensional graphene@carbon nanotube composite as a high-efficiency microwave absorber
DOI: 10.1039/C4CP04745A
Nano-design of quantum dot-based photocatalysts for hydrogen generation using advanced surface molecular chemistry
Dalal Noureldine, Tayirjan Isimjan, Bin Lin, Silvano Del Gobbo, Mutalifu Abulikemu, Mohamed Nejib Hedhili, Dalaver H. Anjum, Kazuhiro Takanabe
DOI: 10.1039/C4CP04365K
Water and polymer dynamics in a model polysaccharide hydrogel: the role of hydrophobic/hydrophilic balance
V. Venuti, F. D'Amico, A. Gessini, F. Castiglione, C. Punta, L. Melone, V. Crupi, D. Majolino, F. Trotta, C. Masciovecchio
DOI: 10.1039/C4CP04045G
In situ non-aqueous nucleation and growth of next generation rare-earth-free permanent magnets
Aoran Xu, George E. Sterbinsky, Dario A. Arena, Ziying Wang, Peter W. Stephens
DOI: 10.1039/C4CP04451G
DFT studies of oxygen dissociation on the 116-atom platinum truncated octahedron particle
Paul C. Jennings, Roy L. Johnston
DOI: 10.1039/C4CP02147A
Correction: High throughput first-principles calculations of bixbyite oxides for TCO applications
Nasrin Sarmadian, Rolando Saniz, Bart Partoens, Dirk Lamoen, Kalpana Volety, Guido Huyberechts, Johan Paul
DOI: 10.1039/C4CP90183E
Electronic properties of PbX3CH3NH3 (X = Cl, Br, I) compounds for photovoltaic and photocatalytic applications
Sigismund Teunis Alexander George Melissen, Frédéric Labat, Philippe Sautet, Tangui Le Bahers
DOI: 10.1039/C4CP04666H
こちらもおすすめ
1-{3-[5-(エチルカルボンイル)-2,4-ジメチル-1H-ピロロール-3-基]プロパニル}ピペリジン-4-カルボン酸について、適用される法規ガイドラインは何ですか?
この化合物はCAS番号1142209-81-1であり、GHS分類では corrosive (腐食性物質) と classified (分類物質) として指定され...
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸とは何ですか?
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸は、CAS番号656-46-2の化合物で、化学式はC8H4F2O4です。この化合物は白色の結晶性粉...
8-氯-4-色原酮の代替品はありますか?
8-氯-4-色原酮(CAS番号: 49701-11-3)の代替品には、他の色原酮類似物や、構造が似ている化合物があります。例えば、8-メチル-4-色原酮や、他の...
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートとは何ですか?
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートは、CAS番号1233243-56-5を有する化合物です。これは有...
4-叔丁基-6-氯-嘧啶に適用される法規ガイドラインは何ですか?
4-叔丁基-6-氯-嘧啶はCAS番号3435-24-3で、GHS分類では毒性物質とみなし、GHSの危険性分類が適用されます。REACH規則では登録が必要で、Eu...
維库溴铵杂质Bはどのように合成されますか?
維库溴铵杂质Bは、アンドロステンデンから始まり、一連の合成反応、包括的な選択性と高い収率で合成されます。具体的には、ブロミド化、酸化、ジマーゼ反応、アミド化など...
2-(4-氟苄基)-吡咯烷の物理化学的性質は何ですか?
CAS番号350017-04-8の2-(4-氟苄基)-吡咯烷は、結晶性の白色粉末です。分子量は199.17 g/molで、水に溶けにくいです。化学反応では比較的...
3-喹啉甲醛(2-チロール-8-エチル)は安全ですか?
3-喹啉甲醛(2-チロール-8-エチル)は一定の毒性を持つため、取扱には注意が必要です。使用する際は適切な防護具を着用し、密閉容器で保管・搬送し、直接的な接触を...
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートはどのように保存すればよいですか?
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートは、室温(25℃)以下で保存し、直射日光を避け、乾燥した環境で保管することが推奨されます。ま...
掲載誌
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.














![2-Bromodibenzo[b,d]furan structure 2-Bromodibenzo[b,d]furan structure](https://static.chemtradehub.com/structs/86-/86-76-0-1814.webp)