The improvement of the high voltage performance of LiCoO2 by coating LiTaO3via magnetron sputtering
文献情報
Chenhui Wang, Shaopeng Li, Weiyi Chen, Yining Zhao, Shu Xu, Hui Dou, Xiaogang Zhang
Lithium cobalt oxide (LiCoO2) is one of the most commercially successful cathode materials and has attracted much attention from researchers since its discovery. However, an increase in cut-off voltage generates problems such as structural damage and detrimental side reactions. Under this premise, a layer of LiTaO3 coating is sputtered on the surface of the LiCoO2 electrode by magnetron sputtering, which aims to inhibit the structural damage and the occurrence of side reactions under high voltage. Meanwhile, the ionic conductor layer of LiTaO3 can also promote the transmission process of Li+ and improve the power density. The results show that the capacity retention rate of the MS-2 h (magnetron sputtering for 2 hours) electrode is 86.6% at 0.5C for 100 cycles in a voltage range of 3.0–4.6 V, and the capacity of 91 mA h g−1 is achieved at 3C. The cycling stability of the electrode is also effectively improved at high temperature, and the capacity retention rate was 40.9% after 100 cycles at 50 °C. This work proves that the coating of LiTaO3 on the electrode surface by magnetron sputtering can effectively inhibit the damage of the electrode structure and the occurrence of side reactions during cycling and can promote the transmission of lithium ions.
関連文献
Broadband two dimensional infrared spectroscopy of cyclic amide 2-Pyrrolidinone
DOI: 10.1039/C5CP04272K
Ultra-fast single-file transport of a simple liquid beyond the collective behavior zone
Jiaye Su, Keda Yang, Decai Huang
DOI: 10.1039/C5CP07253K
Formic acid oxidation on platinum: a simple mechanistic study
Kathleen A. Schwarz, Ravishankar Sundararaman, Thomas P. Moffat, Thomas C. Allison
DOI: 10.1039/C5CP03045E
A theoretical study of sum-frequency generation for chiral solutions near electronic resonance
Ren-hui Zheng, Wen-mei Wei, Qiang Shi
DOI: 10.1039/C5CP02136G
Reverse solvatochromism in solvent binary mixtures: a case study using a 4-(nitrostyryl)phenolate as a probe
Rafaela I. Stock, Adriana D. S. Schramm, Marcos C. Rezende, Vanderlei G. Machado
DOI: 10.1039/C6CP03875A
Towards an accurate specific reaction parameter density functional for water dissociation on Ni(111): RPBE versus PW91
Bin Jiang, Hua Guo
DOI: 10.1039/C6CP03707K
Controlling charge injection properties in polymer field-effect transistors by incorporation of solution processed molybdenum trioxide
Dang Xuan Long, Yong Xu, Huai-xin Wei, Yong-Young Noh
DOI: 10.1039/C5CP03369A
A ‘bottom up’, ab initio computational approach to understanding fundamental photophysical processes in nitrogen containing heterocycles, DNA bases and base pairs
Barbara Marchetti, Michael N. R. Ashfold, Wolfgang Domcke
DOI: 10.1039/C6CP00165C
Is formamide a geochemically plausible prebiotic solvent?
Jeffrey L. Bada, John H. Chalmers
DOI: 10.1039/C6CP03290G
こちらもおすすめ
1-{3-[5-(エチルカルボンイル)-2,4-ジメチル-1H-ピロロール-3-基]プロパニル}ピペリジン-4-カルボン酸について、適用される法規ガイドラインは何ですか?
この化合物はCAS番号1142209-81-1であり、GHS分類では corrosive (腐食性物質) と classified (分類物質) として指定され...
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸とは何ですか?
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸は、CAS番号656-46-2の化合物で、化学式はC8H4F2O4です。この化合物は白色の結晶性粉...
8-氯-4-色原酮の代替品はありますか?
8-氯-4-色原酮(CAS番号: 49701-11-3)の代替品には、他の色原酮類似物や、構造が似ている化合物があります。例えば、8-メチル-4-色原酮や、他の...
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートとは何ですか?
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートは、CAS番号1233243-56-5を有する化合物です。これは有...
4-叔丁基-6-氯-嘧啶に適用される法規ガイドラインは何ですか?
4-叔丁基-6-氯-嘧啶はCAS番号3435-24-3で、GHS分類では毒性物質とみなし、GHSの危険性分類が適用されます。REACH規則では登録が必要で、Eu...
維库溴铵杂质Bはどのように合成されますか?
維库溴铵杂质Bは、アンドロステンデンから始まり、一連の合成反応、包括的な選択性と高い収率で合成されます。具体的には、ブロミド化、酸化、ジマーゼ反応、アミド化など...
2-(4-氟苄基)-吡咯烷の物理化学的性質は何ですか?
CAS番号350017-04-8の2-(4-氟苄基)-吡咯烷は、結晶性の白色粉末です。分子量は199.17 g/molで、水に溶けにくいです。化学反応では比較的...
3-喹啉甲醛(2-チロール-8-エチル)は安全ですか?
3-喹啉甲醛(2-チロール-8-エチル)は一定の毒性を持つため、取扱には注意が必要です。使用する際は適切な防護具を着用し、密閉容器で保管・搬送し、直接的な接触を...
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートはどのように保存すればよいですか?
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートは、室温(25℃)以下で保存し、直射日光を避け、乾燥した環境で保管することが推奨されます。ま...
掲載誌
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.














