Retarding crystal transitions of polybutene-1 in blends
文献情報
Zefeng Cui, Chuang Li, Binyuan Liu, Shichun Jiang
In this study, copolymers of 1-butene with allyltrimethylsilane (TMAS) were synthesized via rac-ethylenebis(indenyl)zirconium chloride (rac-Et(Ind)2ZrCl2)/methylaluminoxane (MAO) catalyst. Combining 1H-NMR and Fourier transform infrared (FT-IR) spectroscopies, the microstructure of the copolymer was verified and the insertion rate of TMAS was calculated. Herein, we demonstrate that the isotacticity and thermal decomposition temperature of the copolymers decreased with the contents of allyltrimethylsilane in the copolymers. After blending the resultant copolymers with high isotactic poly(1-butene) powder (HI-PB), it was found that the 1-butene-allyltrimethylsilane copolymer (PB-TMAS) reduced the crystallization temperature, inhibited the formation of form I in the amorphous region at the initial stage of crystal transformation, and slowed down the crystalline transformation from form II to form I, but did not affect the time of the initial reduction of form II.
関連文献
The crystal structure and chemical state of aluminum-doped hydroxyapatite by experimental and first principles calculation studies
Ming Wang, Liping Wang, Chao Shi, Tian Sun, Yingchun Zhu
DOI: 10.1039/C6CP03230C
Tunable dipole induced hydrogen bonds between a hydrogen molecule and alkali halides
Bolong Huang, Jianfu Li, Zhenyi Jiang, Bo Wang, Zhigang Wang, Rui-Qin Zhang
DOI: 10.1039/C5CP02598B
Stability and geometry of silica nano-ribbons (SNRs): a first-principles study
A. van Blaaderen, M. A. van Huis
DOI: 10.1039/C6CP03913H
Facile synthesis of SnO2 nanocrystals anchored onto graphene nanosheets as anode materials for lithium-ion batteries
Yanjun Zhang, Li Jiang, Chunru Wang
DOI: 10.1039/C5CP03305E
Separation of benzene from mixtures with water, methanol, ethanol, and acetone: highlighting hydrogen bonding and molecular clustering influences in CuBTC
Rajamani Krishna
DOI: 10.1039/C5CP02726H
The unique Raman fingerprint of boron nitride substitution patterns in graphene
Marco Lorenz, Daniele Pullini, Mauro Sgroi
DOI: 10.1039/C6CP02101H
Optically active multi-helical erythrocyte-like Ln(OH)CO3 (Ln = La, Ce, Pr and Sm)
Jing Chen, Songmei Li, Juan Du, Bo Wang, Shiming Meng, Jianhua Liu, Mei Yu
DOI: 10.1039/C6CP02302A
A first principles study of CO2 adsorption on α-SiO2(001) surfaces
Oleksandr I. Malyi, Priyadarshini Thiyam, Mathias Boström
DOI: 10.1039/C5CP02279G
An ultrafast spectroscopic and quantum mechanical investigation of multiple emissions in push–pull pyridinium derivatives bearing different electron donors
B. Carlotti, E. Benassi, A. Cesaretti, C. G. Fortuna, A. Spalletti, V. Barone, F. Elisei
DOI: 10.1039/C5CP03207E
こちらもおすすめ
1-{3-[5-(エチルカルボンイル)-2,4-ジメチル-1H-ピロロール-3-基]プロパニル}ピペリジン-4-カルボン酸について、適用される法規ガイドラインは何ですか?
この化合物はCAS番号1142209-81-1であり、GHS分類では corrosive (腐食性物質) と classified (分類物質) として指定され...
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸とは何ですか?
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸は、CAS番号656-46-2の化合物で、化学式はC8H4F2O4です。この化合物は白色の結晶性粉...
8-氯-4-色原酮の代替品はありますか?
8-氯-4-色原酮(CAS番号: 49701-11-3)の代替品には、他の色原酮類似物や、構造が似ている化合物があります。例えば、8-メチル-4-色原酮や、他の...
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートとは何ですか?
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートは、CAS番号1233243-56-5を有する化合物です。これは有...
4-叔丁基-6-氯-嘧啶に適用される法規ガイドラインは何ですか?
4-叔丁基-6-氯-嘧啶はCAS番号3435-24-3で、GHS分類では毒性物質とみなし、GHSの危険性分類が適用されます。REACH規則では登録が必要で、Eu...
維库溴铵杂质Bはどのように合成されますか?
維库溴铵杂质Bは、アンドロステンデンから始まり、一連の合成反応、包括的な選択性と高い収率で合成されます。具体的には、ブロミド化、酸化、ジマーゼ反応、アミド化など...
2-(4-氟苄基)-吡咯烷の物理化学的性質は何ですか?
CAS番号350017-04-8の2-(4-氟苄基)-吡咯烷は、結晶性の白色粉末です。分子量は199.17 g/molで、水に溶けにくいです。化学反応では比較的...
3-喹啉甲醛(2-チロール-8-エチル)は安全ですか?
3-喹啉甲醛(2-チロール-8-エチル)は一定の毒性を持つため、取扱には注意が必要です。使用する際は適切な防護具を着用し、密閉容器で保管・搬送し、直接的な接触を...
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートはどのように保存すればよいですか?
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートは、室温(25℃)以下で保存し、直射日光を避け、乾燥した環境で保管することが推奨されます。ま...
掲載誌
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.














