A simple tandem mass spectrometry method for structural identification of pentose oligosaccharides

文献情報

出版日 2023-03-07
DOI 10.1039/D3AN00068K
インパクトファクター 4.616
著者

Shang-Ting Tsai, Hsu-Chen Hsu


原文を見る

要旨

Differentiation of stereoisomers that are only dissimilar in the orientation of chemical bonds in space by mass spectrometry remains challenging. Structural determination of carbohydrates by mass spectrometry is difficult, mainly due to the large number of stereoisomers in carbohydrates. Arabinose and xylose are pentose stereoisomers typically present in plant polysaccharides and exist in α- and β-anomeric configurations of furanose and pyranose forms. Conventional methods used to determine the structures of polysaccharides include hydrolysis of polysaccharides into oligosaccharides followed by identification of these oligosaccharides’ structures individually through nuclear magnetic resonance spectroscopy (NMR). Although the sensitivity of mass spectrometry is much higher than that of NMR, conventional mass spectrometry provides only limited useful information on oligosaccharide structure determination, only the linkage positions of glycosidic bonds. In this study, we demonstrated a mass spectrometry method for the identification of linkage positions, anomeric configurations, and monosaccharide stereoisomers of intact oligosaccharides consisting of arabinose and xylose. We separated arabinose and xylose monosaccharides into α-furanose, β-furanose, α-pyranose, and β-pyranose forms through high-performance liquid chromatography and obtained the corresponding collision-induced dissociation mass spectra. Using these monosaccharide spectra and a flow chart consisting of the proper CID sequences derived from the dissociation mechanisms of pentose, a simple multi-stage tandem mass spectrometry method for structural identification of intact oligosaccharides consisting of arabinose and xylose was developed. The new mass spectrometry method provides a simple method for determining the structure of polysaccharides consisting of arabinose and xylose. The flow chart can be used in computer coding for automation, an ultimate goal for oligosaccharide structure determination.

関連文献

Asymmetric iodine catalysis-mediated enantioselective oxidative transformations

Aurélie Claraz, Géraldine Masson

2018-07-13 Review Article

DOI: 10.1039/C8OB01378K

A fluorescence-enhanced chemosensor based on multifarene[2,2] and its recognition of metal cations

Yin-Hui Huang, Yong-Yi Zhao, Hang Cong, Zhu Tao

2018-07-05 Paper

DOI: 10.1039/C8OB01315B

Dibenzofuran-4,6-bis(oxazoline) (DBFOX). A novel trans-chelating bis(oxazoline) ligand for asymmetric reactions

Kennosuke Itoh, Mukund P. Sibi

2018-06-18 Review Article

DOI: 10.1039/C8OB01010B

An organocatalyst bound α-aminoalkyl radical intermediate for controlled aerobic oxidation of iminium ions

Abdul Motaleb, Asish Bera, Pradip Maity

2018-06-16 Communication

DOI: 10.1039/C8OB01032C

Inexpensive NaX (X = I, Br, Cl) as a halogen donor in the practical Ag/Cu-mediated decarboxylative halogenation of aryl carboxylic acids under aerobic conditions

Ligao Jiang, Qianming Zuo, Zhaojie Li, Yanzhu Liu, Zhenhong Wei, Hu Cai

2018-07-05 Communication

DOI: 10.1039/C8OB01095A

An MeSeSO3Na reagent for oxidative aminoselenomethylation of maleimides

Yujing Yao, Wenliang Zhang

2021-09-14 Research Article

DOI: 10.1039/D1QO01252E

Base-promoted diastereoselective α-alkylation of borane N-((S)-1′-phenylethyl)azetidine-2-carboxylic acid ester complexes

Eiji Tayama, Ryotaro Nishio, Yoshiaki Kobayashi

2018-07-27 Paper

DOI: 10.1039/C8OB01395K

Catalytic asymmetric dearomative [4 + 2] annulation of 2-nitrobenzofurans and 5H-thiazol-4-ones: stereoselective construction of dihydrobenzofuran-bridged polycyclic skeletons

Jian-Qiang Zhao, Zhen-Hua Wang, Yong You, Shuang Chen, Xiong-Li Liu, Ming-Qiang Zhou, Wei-Cheng Yuan

2021-09-16 Research Article

DOI: 10.1039/D1QO01061A

こちらもおすすめ

化合物よくある質問

除水剤ALT-201は安全ですか?

除水剤ALT-201は一般的に安全ですが、避けるべきは皮膚や目への接触です。適切な防護具を着用し、安全基準を守ることが重要です。

28770-01-62-(2-Isopropyl-1,3-o...
化合物よくある質問

「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?

CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...

163217-74-1ortho-Hydroxy Atorva...
化合物よくある質問

メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?

メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...

2241594-15-8Methyl (3R)-3-amino-...
化合物よくある質問

トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?

トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...

265108-42-7trans-4-Methylpyrrol...
化合物よくある質問

硫雜環丁烷-1,1-二氧化物は安全ですか?

硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...

5687-92-3Thietane 1,1-dioxide
化合物よくある質問

ブラエリリンの主な用途は何ですか?

ブラエリリンは主に医薬品製造における薬物アドベリンの合成材料として使用されます。また、研究用途や化学合成材料としても広く利用されています。

6054-10-02H, 8H-Benzo[1,2-b
化合物よくある質問

9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?

9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。

52238-35-49-Hydroxyellipticine...
化合物よくある質問

5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?

5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...

5621-86-3[5-Chloro-2-(methyla...
化合物よくある質問

1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?

1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。

117132-44-21-[2-(4-Methoxy-phen...
化合物よくある質問

2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?

2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...

1073371-72-82-[3-(4-Methoxypheny...

掲載誌

Analyst

Analyst
CiteScore: 7.8
自己引用率: 5.6%
年間論文数: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。