A one-pot biocatalytic and organocatalytic cascade delivers high titers of 2-ethyl-2-hexenal from n-butanol
文献情報
Kelsey N. Stewart, Dylan W. Domaille
Biocatalysis provides facile access to selective chemical transformations and helps satisfy sustainable chemical production criteria. However, the reaction scope of biocatalysts is significantly narrower compared to synthetic chemical transformations. Hybrid biocatalytic–chemocatalytic cascades expand the scope of products while maintaining many of the benefits associated with biocatalysis. Here, we report that single-pot systems with whole cell K. pastoris (ATCC® 28485™) or isolated enzyme alcohol oxidase (E.C. 1.1.3.13) as oxidative biocatalysts with a lysine organocatalyst yield the commercial target, 2-ethyl-2-hexenal (2-EH) from n-butanol in a two-step hybrid cascade. Peak yields for both biocatalysts were achieved with 100 mM n-butanol at pH 8 and 30 °C. The isolated enzyme slightly outperformed whole cell K. pastoris, reaching 73% conversion (4.7 g L−1 titers) compared to 61% (3.9 g L−1 titers) in whole cell systems. Titers could be improved for both biocatalysts (5.7–6.7 g L−1) at increased butanol loading; however, this came at the expense of decreased yields. Compared to our initial results with a Gluconobacter oxidans whole cell biocatalyst, the reported system improves upon 2-EH titers by 2.8–3.3-fold at maximal yields.
関連文献
New approach to increase the sensitivity of Tb–Eu-based luminescent thermometer
Alexander I. Dalinger, Leonid S. Lepnev, Sergey Z. Vatsadze
DOI: 10.1039/D0CP04909C
Strikingly different molecular organization and molecular order of tetracatenar mesogens in columnar mesophases revealed by XRD and 13C NMR
M. Guruprasad Reddy, Nitin P. Lobo, Arun Roy, K. V. Ramanathan, T. Narasimhaswamy
DOI: 10.1039/D0CP03933K
Kinetic study of the OH + HO2 → H2O + O2 reaction using ring polymer molecular dynamics and quantum dynamics
Yang Liu, Hongwei Song, Jun Li
DOI: 10.1039/D0CP04120C
Quantifying how step-wise fluorination tunes local solute hydrophobicity, hydration shell thermodynamics and the quantum mechanical contributions of solute–water interactions
João R. Robalo, Denilson Mendes de Oliveira, Petra Imhof, Dor Ben-Amotz, Ana Vila Verde
DOI: 10.1039/D0CP04205F
Towards understanding the catalytic properties of lead-based ballistic modifiers in double base propellants
Lisette R. Warren, Colin R. Pulham, Carole A. Morrison
DOI: 10.1039/D0CP05172A
Charge regulation of colloidal particles in aqueous solutions
Amin Bakhshandeh, Derek Frydel, Yan Levin
DOI: 10.1039/D0CP03633A
Behavior of the water/vapor interface of chitosan solutions with an anionic surfactant: effect of polymer–surfactant interactions
DOI: 10.1039/D0CP02470H
Selective bond breaking of halothane induced by electron transfer in potassium collisions
A. I. Lozano, L. S. Maioli, B. Pamplona, M. Mendes, F. Ferreira da Silva, F. Kossoski, D. Süβ, M. H. F. Bettega, G. García, P. Limão-Vieira
DOI: 10.1039/D0CP02570D
こちらもおすすめ
噻奈普汀乙酯の物理化学的性質は何ですか?
CAS番号66981-77-9の噻奈普汀乙酯は、結晶性白色粉末であり、分子量は476.9 g/molです。この化合物は水に溶けにくく、一般的には有機溶媒で溶解し...
アミピシリン不純物Fとは何ですか?
アミピシリン不純物Fは、CAS番号124774-48-7の化合物です。これは、抗生物質アミピシリンの生産過程で生成される不純物の一つであり、(4S)-2-({[...
イリジウム(I)ヘキサフルオロフォスファートの代替品はありますか?
イリジウム(I)ヘキサフルオロフォスファートの代替品として、他の有機金属化合物や非有機金属化合物が使用されることがあります。具体的には、ダイゾニウム塩や他の金属...
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物はどのように処理すべきですか?
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物は、安全な方法で処理する必要があります。まず、廃棄物を適切な容器に収集し、避けて保管します。次に、専門の廃棄処理業者...
2-甲基辛-1-醇を取り扱う際の実験室安全事項は何ですか?
取り扱う際は、密閉のゴーグルと手袋を着用することが推奨されます。ドラフトチャンバーを使用し、漏洩時には速やかに取り扱いを中止し、適切な排気設備を使用してください...
3α-アセトキノイドコレステロールエステルはどのように保存すればよいですか?
3α-アセトキノイドコレステロールエステルは、常温から低温(0-5℃)の暗所で保存し、密閉容器に入れることで安定性を保つことが推奨されます。また、湿気や酸素から...
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸の主な用途は何ですか?
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸は、化学合成の触媒としての使用や、医薬品の合成材料としての役割があります。また、特定の合成路線で使用...
(2S,3R)-2-氨基-3-甲基丁二酸はどのように合成されますか?
(2S,3R)-2-氨基-3-甲基丁二酸は、2-ヒドロキシ-3-メチル丁酸とアミノ化反応を行うことで合成されます。触媒としてジクロロメタンが使用され、選択性と収...
1-Benzyl-2-phenyl-1H-imidazoleはどのように保存すればよいですか?
この化合物は常温で避けてください。直射日光を避け、密閉容器で保存し、湿気を防水の容器に入れて保管してください。
掲載誌
Reaction Chemistry & Engineering

Reaction Chemistry & Engineering is an interdisciplinary journal reporting cutting-edge research focused on enhancing the understanding and efficiency of reactions. Reaction engineering leverages the interface where fundamental molecular chemistry meets chemical engineering and technology. Challenges in chemistry can be overcome by the application of new technologies, while engineers may find improved solutions for process development from the latest developments in reaction chemistry. Reaction Chemistry & Engineering is a unique forum for researchers whose interests span the broad areas of chemical engineering and chemical sciences to come together in solving problems of importance to wider society. All papers should be written to be approachable by readers across the engineering and chemical sciences. Papers that consider multiple scales, from the laboratory up to and including plant scale, are particularly encouraged.














