Understanding the origin of structure sensitivity in hydrodechlorination of trichloroethylene on a palladium catalyst

文献情報

出版日 2021-09-17
DOI 10.1039/D1RE00252J
インパクトファクター 4.239
著者

Chaitra S. Shenoy, Tuhin S. Khan, Kirti Verma, Mesfin Tsige, M. Ali Haider, Shelaka Gupta


原文を見る

要旨

Periodic density functional theory (DFT) calculations are employed to understand the origin of structure sensitivity in hydrodechlorination (HDC) of trichloroethylene (TCE) over different facets of a palladium catalyst. The HDC reaction is simulated on the terrace (Pd (111) and Pd (100)) and undercoordinated (Pd (211) and Pd (110)) sites of the Pd catalyst. The most stable binding configuration of TCE on the Pd surfaces is observed to be through the di-σ mode of binding, wherein each carbon atom of the TCE molecule is adsorbed atop of the Pd atom. On comparing TCE adsorption over different facets of Pd, a maximum binding energy of −178 kJ mol−1 is calculated over the Pd (110) surface. TCE, upon adsorption on Pd catalyst, undergoes dechlorination followed by hydrogenation of the hydrocarbon intermediates. The activation energies for C–Cl bond dissociation steps are significantly low when compared to the hydrogenation steps. The chlorine released from dechlorination tends to block the active sites, thereby poisoning the surface with high binding energies (B.E > −160 kJ mol−1) on all the surfaces. The trend in chlorine binding energies on Pd facets follows: Pd (110) > Pd (211) > Pd (100) > Pd (111). The removal of surface chlorine is facilitated by its reaction with surface hydrogen to form hydrogen chloride. The activation energy for hydrogen chloride formation is calculated to be 90 kJ mol−1 and 88 kJ mol−1 on Pd (111) and Pd (100) terrace sites, respectively and 109 kJ mol−1 and 118 kJ mol−1 on the step Pd (211) and corrugated Pd (110) facets, respectively. This suggests the ease of removal of Cl as HCl from the terrace sites as compared to the step and corrugated sites. The structure sensitivity in the TCE HDC reaction could possibly arise due to the differences in the energetics of Cl removal on different Pd facets. This mechanistic understanding could provide a rationale for designing suitable catalysts for the HDC of TCE.

関連文献

Direct assessment of molecular transport in mordenite: dominance of surface resistances

Lei Zhang, Christian Chmelik, Adri N. C. van Laak, Jörg Kärger, Petra E. de Jongh, Krijn P. de Jong

2009-09-08 Communication

DOI: 10.1039/B914391B

Polythiophene derivatives by step-growth polymerizationvia photoinduced electron transfer reactions

Binnur Aydogan, Ali Senol Gundogan, Turan Ozturk, Yusuf Yagci

2009-09-07 Communication

DOI: 10.1039/B914953H

Exopolyhedral ligand flipping on isomerisation of novel supraicosahedral stannacarboranes

Peter D. Abram, David Ellis, Georgina M. Rosair, Alan J. Welch

2009-08-14 Communication

DOI: 10.1039/B911350A

Multiple conformational changes of β-tetraphenyl meso-hexakis(pentafluorophenyl) substituted [26] and [28]hexaphyrins(1.1.1.1.1.1)

Taro Koide, Katsuyuki Youfu, Shohei Saito, Atsuhiro Osuka

2009-08-21 Communication

DOI: 10.1039/B910167E

Pronounced effects of substituents on the iridium-catalyzed borylation of aryl C–H bonds‡

Carl W. Liskey, Carolyn S. Wei, Dale R. Pahls, John F. Hartwig

2009-08-20 Communication

DOI: 10.1039/B913949D

Self-standing, metal nanoparticle embedded transparent films from multi-armed cardanol conjugates through in situ synthesis

Kuthanapillil Jyothish, Praveen Kumar Vemula, Swapnil R. Jadhav, Lynn C. Francesconi, George John

2009-06-08 Communication

DOI: 10.1039/B900208A

Facile synthesis of stapled, structurally reinforced peptide helices via a photoinduced intramolecular 1,3-dipolar cycloaddition reaction

Michael M. Madden, Claudia I. Rivera Vera, Wenjiao Song, Qing Lin

2009-08-13 Communication

DOI: 10.1039/B912094G

Copper-catalyzed enantioselectivecarbenoidinsertion into S–H bonds‡

Yong-Zhen Zhang, Shou-Fei Zhu, Yan Cai, Hong-Xiang Mao, Qi-Lin Zhou

2009-08-11 Communication

DOI: 10.1039/B911670B

Electrical control of cell density gradients on a conducting polymer surface

Alwin M. D. Wan, Daniel J. Brooks, Abdurrahman Gumus, Claudia Fischbach, George G. Malliaras

2009-07-21 Communication

DOI: 10.1039/B911130A

こちらもおすすめ

化合物よくある質問

2,3-スチオエポキシマドルを取り扱う際の実験室安全事項は何ですか?

取り扱いにはPPE(プロテクティブ・パーソナル・エイド)が必要で、防ぐ手袋と保護眼鏡を着用してください。ドラフトチャンバーの使用を推奨します。漏洩した場合は、適...

4267-80-52,3-Thioepoxy Madol
化合物よくある質問

6-氟-2-氨基苯酚の主な用途は何ですか?

6-氟-2-氨基苯酚は主に医薬品の合成材料として使用され、一部の農薬の製造にも利用されます。また、研究用途でも広く使用されています。

53981-25-22-Amino-6-fluorophen...
化合物よくある質問

BOC-S-3-アミニ-4-(4-メチオキシベンチル)-ブタン酸の代替品はありますか?

この化合物の代替品としては、BOC保護基を有さないアミノ酸やその他の保護基化合物が考えられます。また、メチオキシ基を有しない他の芳香族アミノ酸も代替品として挙げ...

126800-59-7(3S)-4-(4-Methoxyphe...
化合物よくある質問

Methyl 2-(chloromethyl)-3-nitrobenzoate(1218910-61-2)の代替品はありますか?

Methyl 2-(chloromethyl)-3-nitrobenzoate(1218910-61-2)の代替品としては、化学組成を変えることで効果を達成する...

1218910-61-2Methyl 2-(chlorometh...
化合物よくある質問

(2R)-2-アミノ-N-ベンジル-3-ヒドロキシプロパナミドを含む廃棄物はどのように処理すべきですか?

(2R)-2-アミノ-N-ベンジル-3-ヒドロキシプロパナミドを含む廃棄物は、適切な廃棄物管理ガイドラインに基づき処理する必要があります。まず、廃棄物を適切に収...

175481-39-7(2R)-2-amino-N-benzy...
化合物よくある質問

6,7-二氢-咪唑並[1,2-a]ピリドイン-8(5h)-酮はどのように合成されますか?

6,7-二氢-咪唑並[1,2-a]ピリドイン-8(5h)-酮は、2-ブロモフェニルアセトインとリン酸ハロゲン化物を反応させることで合成できます。この反応は高温で...

457949-09-66,7-Dihydroimidazo[1...
化合物よくある質問

エチル(3R)-3-ピロリジニル酢酸水和塩とは何ですか?

エチル(3R)-3-ピロリジニル酢酸水和塩は、CAS番号1332459-32-1の化合物で、(R)-乙基2-(ピロリジン-3-基)酢酸塩水和塩と呼ばれます。この...

1332459-32-1Ethyl (3R)-3-pyrroli...
化合物よくある質問

(2S)-{[(2-メチルエチルオキシ]カルボニル}アミノ)[2-(トリアフルオロメチルフェニル]エチカシック酸の物理化学的性質は何ですか?

(2S)-{[(2-メチルエチルオキシ]カルボニル}アミノ)[2-(トリアフルオロメチルフェニル]エチカシック酸のCAS番号は1203454-45-8です。この...

1203454-45-8(2S)-({[(2-Methyl-2-...
化合物よくある質問

2-ブロモ-1-(2-メチル-2-プロパニル)-4-ニトロベンゼンはどのように保存すればよいですか?

2-ブロモ-1-(2-メチル-2-プロパニル)-4-ニトロベンゼンは、直射日光を避けて暗所で、室温(約15℃〜25℃)、乾燥した場所に保存する必要があります。ま...

6310-17-42-Bromo-1-(2-methyl-...
化合物よくある質問

1-[(4-硝基フェニル)スルホニル]-1H-1,2,4-三唑の市場動向や研究トレンドはどうですか?

市場動向としては、1-[(4-硝基フェニル)スルホニル]-1H-1,2,4-三唑は主に農業用除草剤や合成化学製品の原料として利用されています。研究トレンドとして...

57777-84-11-[(4-Nitrophenyl)su...

掲載誌

Reaction Chemistry & Engineering

Reaction Chemistry & Engineering
CiteScore: 0
自己引用率: 8.8%
年間論文数: 284

Reaction Chemistry & Engineering is an interdisciplinary journal reporting cutting-edge research focused on enhancing the understanding and efficiency of reactions. Reaction engineering leverages the interface where fundamental molecular chemistry meets chemical engineering and technology. Challenges in chemistry can be overcome by the application of new technologies, while engineers may find improved solutions for process development from the latest developments in reaction chemistry. Reaction Chemistry & Engineering is a unique forum for researchers whose interests span the broad areas of chemical engineering and chemical sciences to come together in solving problems of importance to wider society. All papers should be written to be approachable by readers across the engineering and chemical sciences. Papers that consider multiple scales, from the laboratory up to and including plant scale, are particularly encouraged.

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。