A mesoporous silica-supported CeO2/cellulose cathode catalyst for efficient bioelectrochemical reduction of inorganic carbon to biofuels
文献情報
Dayakar Thatikayala, Deepak Pant, Booki Min
In this study, a novel efficient cathode electrode was fabricated to convert inorganic carbon to volatile fatty acids (VFAs) through microbial electrosynthesis (MES) in a single chamber reactor. The cathode catalyst was made up of mesoporous silica (mS) coated with cerium oxide (CeO2) and carbonized cellulose (C) in which mS acted as a core material and both CeO2 and C acted as a shell material. CeO2/C was loaded on the porous surface of mS, which acted as catalytic centers to enhance the biochemical reactions. The C/CeO2@mS composite catalyst coated on carbon cloth (Cc) was characterized by XRD and FESEM and showed high crystallinity and a porous core–shell morphology. The cyclic voltammetry analysis indicated that the cathode with C/CeO2@mS exhibited higher catalytic activity (−0.59 mA cm−2 (background current)) than the other controls (0.26 mA cm−2 for MES-C and −0.06 mA cm−2 for MES-mS). Three MES reactors with different cathodes were comparatively operated for the conversion of CO2 (8 g L−1 of HCO3−), and MES-C/CeO2@mS exhibited maximum acetate production (19.1 ± 0.95 mM) followed by MES-C (10.8 ± 0.51 mM) and MES-mS (9.5 ± 0.33 mM). The coulombic efficiency (CE%) in MES-C/CeO2@mS was 76%, and it was 42% and 34% for MES-mS and MES-C, respectively. The maximum current generation (0.48 ± 0.21 mA cm−2) was obtained with MES-C/CeO2@mS at a relatively higher cathode potential (−0.61 mV) as compared with the other cathodes. MES-C/CeO2@mS showed a lower Tafel slope of 220 mV dec−1, which was 2.71 times lower than that of abiotic MES-C/CeO2@mS (598 mV dec−1) suggesting enhanced electrokinetics with exoelectrogenic biofilm development on the cathode electrode. This study clearly demonstrates that the C/CeO2@mS catalyst can be successfully used for highly efficient bioelectrochemical conversion of CO2 to value added products via a MES route.
関連文献
An ab initio insight into the Cu(111)-mediated Ullmann reaction
Manh-Thuong Nguyen, Carlo A. Pignedoli, Daniele Passerone
DOI: 10.1039/C0CP00759E
A sublattice-model isotherm for the competitive coadsorption of hydrogen and bromide on a Pt(100)electrode
M. T. M Koper
DOI: 10.1039/B912091B
Zero-point vibrational corrections to isotropic hyperfine coupling constants in polyatomic molecules
Zilvinas Rinkevicius, Kenneth Ruud, Hans Ågren
DOI: 10.1039/C0CP01443E
Autonomous folding in the membrane proximal HIV peptide gp41659–671: pH tuneability at micelle interfaces
Craig R. Gregor, Eleonora Cerasoli, Paul R. Tulip, Maxim G. Ryadnov, Glenn J. Martyna
DOI: 10.1039/C0CP01502D
Multidimensional steric effect for the XeF* (B, C) formation in the oriented Xe* (3P2, MJ = 2) + oriented NF3 reaction
H. Ohoyama
DOI: 10.1039/C0CP00648C
Incorporation of Pd into Au(111): enhanced electrocatalytic activity for the hydrogen evolution reaction
Peter J. Schäfer, Ludwig A. Kibler
DOI: 10.1039/C0CP00780C
On the role of mercury in the non-covalent stabilisation of consecutive U–HgII–U metal-mediated nucleic acid base pairs: metallophilic attraction enters the world of nucleic acids
Ladislav Benda, Michal Straka, Yoshiyuki Tanaka, Vladimír Sychrovský
DOI: 10.1039/C0CP01534B
Coherent excitation phenomena in time-resolved experiments
A. Peralta Conde, R. Montero, A. Longarte, F. Castaño
DOI: 10.1039/C0CP00805B
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Reaction Chemistry & Engineering

Reaction Chemistry & Engineering is an interdisciplinary journal reporting cutting-edge research focused on enhancing the understanding and efficiency of reactions. Reaction engineering leverages the interface where fundamental molecular chemistry meets chemical engineering and technology. Challenges in chemistry can be overcome by the application of new technologies, while engineers may find improved solutions for process development from the latest developments in reaction chemistry. Reaction Chemistry & Engineering is a unique forum for researchers whose interests span the broad areas of chemical engineering and chemical sciences to come together in solving problems of importance to wider society. All papers should be written to be approachable by readers across the engineering and chemical sciences. Papers that consider multiple scales, from the laboratory up to and including plant scale, are particularly encouraged.














![5-Bromo-1H-pyrrolo[2,3-b]pyridine structure 5-Bromo-1H-pyrrolo[2,3-b]pyridine structure](https://static.chemtradehub.com/structs/183/183208-35-7-2d72.webp)