Preparation of amphiphilic copolymers via base-catalyzed hydrolysis of quaternized poly[2-(dimethylamino)ethyl methacrylate]

文献情報

出版日 2022-02-11
DOI 10.1039/D1PY01697K
インパクトファクター 5.582
著者

Vladislav Y. Shevtsov, Ting-Yi Hsin, Yeong-Tarng Shieh


原文を見る

要旨

The multi-stimuli-responsiveness of tertiary amine-containing polyacrylates makes them highly attractive for use in a wide range of applications. In the last decade, poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) has received exceptionally great attention due to its versatility, accessibility, and biocompatibility. A process of quaternization of this polymer has already been widely established predominantly because quaternized PDMAEMA (qPDMAEMA) surfaces have been shown to possess an effective antibacterial activity. While studies on the hydrolytic stability of PDMAEMA can be found in the relevant literature, information about the hydrolysis of qPDMAEMA has been, to date, severely lacking. Here, we report the preparation of well-defined PDMAEMA via atom transfer radical polymerization (ATRP) and its partial and complete quaternization with iodomethane (CH3I). Our primary focus was on base-promoted hydrolysis; therefore over the course of two weeks, the reaction of PDMAEMA and three qPDMAEMA of different degrees of quaternization with a base in an aqueous medium was monitored by 1H NMR to obtain a comprehensive kinetic picture of hydrolysis. It was found that under mild conditions (25 °C, 0.25 M NaOD concentration), qPDMAEMA side groups slowly degrade to poly[methacrylic acid] (PMAA), meaning that via consecutive quaternization and hydrolysis, a large variety of desired, cationic, anionic, and zwitterionic copolymers can be synthesized with precise control. We showed that highly stable to hydrolysis PDMAEMA after transformation into qPDMAEMA can be easily hydrolyzed in an alkaline solution, and that opens an alternative, simple, and highly controllable way of preparation of PMAA. The rate and the degree of degradation of quaternized repeating units are dependent on their amount in the copolymer chains. A drastic difference between PDMAEMA and qPDMAEMA in terms of sensitivity to hydrolysis and unexpected rates of this reaction were suspected to be caused by the intramolecular interactions within the side groups and by electrostatic interactions, respectively.

関連文献

MTBE-friend or foe?

Paper

DOI: 10.1039/A908579C

News and Views

2001-10-15 News

DOI: 10.1039/B108144F

News

Paper

DOI: 10.1039/A908572F

Diary of conferences and courses

2003-06-16 Events/Conference Diary

DOI: 10.1039/B306608H

Editorial

Editorial

DOI: 10.1039/A908644D

Focus on-Professor John Hay

Paper

DOI: 10.1039/A908575K

News

Paper

DOI: 10.1039/B001760O

こちらもおすすめ

化合物よくある質問

H-Leu-Ser-Lys-Leu-OH trifluoroacetate saltに適用される法規ガイドラインは何ですか?

CAS番号162559-45-7のH-Leu-Ser-Lys-Leu-OH trifluoroacetate saltは、GHS( Chemicals Clas...

162559-45-7H-Leu-Ser-Lys-Leu-OH...
化合物よくある質問

Trimethyltin Chlorideの物理化学的性質は何ですか?

CAS番号1066-45-1のトリメチルチリドは、白色結晶性粉末で、分子量は297.77です。この化合物は水にわずかに溶けますが、酢酸、エタノール、ジエチルエー...

1066-45-1Trimethyltin Chlorid...
化合物よくある質問

ニコール酸化物水和物の主な用途は何ですか?

ニコール酸化物水和物は、主に金属分離、研磨剤、酸化剤、染料製造の原料として利用されます。また、電気化学製品、触媒、分析化学の分野でも広く使用されています。

7789-49-3Nickel(II) Bromide T...
化合物よくある質問

(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際の実験室安全事項は何ですか?

(2,3-二甲基-2H-吲唑-6-基)boronic acidを取り扱う際は、PPE(防護服、ゴーグル、マスク、手袋)を使用する必要があります。ドラフトチャンバ...

1253912-00-3(2,3-dimethyl-2H-ind...
化合物よくある質問

4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは安全ですか?

4-ブロモ-1-メトキシ-2-(2-メトキシエトオキシ)ベンゼンは一般的に安全とは言えません。取扱いには注意が必要で、直接的な皮膚接触や吸入は避けてください。

1132672-05-94-Bromo-1-methoxy-2-...
化合物よくある質問

4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯はどの業界で使用されていますか?

4,4-双(5-甲基-2-苯并噁唑基)二苯乙烯は医薬業界、ポリマー業界、センサー業界、半導体業界で使用されています。特に、光触媒や蛍光材料として利用されています...

2397-00-42,2'-(1,2-Ethenediyl...
化合物よくある質問

2,3,5,6-四氯-4-ピリジンスチオールを取り扱う際の実験室安全事項は何ですか?

2,3,5,6-四氯-4-ピリジンスチオールは非常に毒性があり、皮膚や粘膜に刺激を与える可能性があります。取り扱う際には、ゴーグル、ゴム手袋、防塵マスクを着用し...

10351-06-12,3,5,6-Tetrachloro-...
化合物よくある質問

替米沙坦ナトリウムとは何ですか?

替米沙坦ナトリウム(CAS番号: 515815-47-1)は、血管張力素II受容体拮抗薬として機能する医薬品で、高血圧症の治療に使用されます。

515815-47-1Telmisartan sodium
化合物よくある質問

TG 4-155はどのように合成されますか?

TG 4-155は、2-(2-メチル-1H-インドン-1-イル)エチルアミドと3,4,5-トリメトキシフェノールを反応させ、選択性的に合成できます。一般的には、...

1164462-05-8(2E)-N-[2-(2-Methyl-...
化合物よくある質問

エチルヒドロキシキニリン-6-カルボキシ酸は適用される法規ガイドラインは何ですか?

エチルヒドロキシキニリン-6-カルボキシ酸のCAS番号1261631-01-9は、GHS分類の第2クラスの腐食物質(皮膚に強い腐食性)に分類されます。また、EU...

1261631-01-9Ethyl 7-Hydroxyquino...

掲載誌

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自己引用率: 7.3%
年間論文数: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。