Bonding of C1 fragments on metal nanoclusters: a search for methane conversion catalysts with swarm intelligence
文献情報
Mikiya Hori, Yuta Tsuji, Kazunari Yoshizawa
There is a need for a catalyst that can directly convert methane into useful substances. The use of Ni as a catalyst for the steam reforming of methane has led us to look at Ni nanoclusters as potential candidates for the direct conversion of methane. Fe, Co, Cu, and Zn nanoclusters are also focused on. How the type of C1 fragments (CH4, CH3, CH2, CH, and C) stabilized by the metal nanoclusters as adsorbed species varies with metal species is theoretically investigated. The particle swarm optimization algorithm, which is based on swarm intelligence, as well as density functional theory, is used for this calculation. The Ni nanoclusters are found to preferentially adsorb C as a stable species, the Fe and the Co nanoclusters both CH and CH3, and the Cu nanoclusters CH3; the Zn nanoclusters are found not to chemisorb any C1 fragment. The methane activation capacity can be ranked in the order of Ni > Fe > Co > Cu > Zn. The highest methane activation capacity of Ni is due to the strongest covalent nature of the interaction between Ni and the adsorbed species. The ionicity of the bond between Fe and the adsorbed species is higher than that between Co and the adsorbed species, while the covalent nature of the bonds is comparable for both. The weak methane activation ability of Cu compared to Fe, Co, and Ni is found to be due to the fact that both the covalent and ionic bond strengths between Cu and the adsorbed species are weak. Zn and the adsorbed species form neither ionic nor covalent bonds. These results indicate that the Fe and the Co nanoclusters as well as the Ni may lead to the over-oxidation of methane, whereas the Zn nanoclusters cannot activate methane in the first place; therefore, their application to direct methane conversion catalysts is unlikely. Since the Cu nanoclusters do not adsorb C and CH as stable species, but CH3 stably, the Cu nanoclusters are expected to work as a catalyst for the direct conversion of methane.
おすすめジャーナル

Russian Journal of Bioorganic Chemistry

Current Opinion in Colloid & Interface Science

Journal of Natural Medicines

Chemistry Education Research and Practice

New Journal of Chemistry

Russian Journal of General Chemistry

Organic Process Research & Development

Journal of Saudi Chemical Society

Russian Journal of Coordination Chemistry

Nature Medicine
関連文献
Transformable fluorescent nanoparticles (TFNs) of amphiphilic block copolymers for visual detection of aromatic amines in water
Yuhan Cui, Yusheng Zhou, Guodong Liang
DOI: 10.1039/D1PY00919B
Aluminum-catalyzed statistical copolymerization of mono-, tri- and penta-fluorophenyl glycidyl ether with ethylene oxide and epichlorohydrin
Fang Guo, Ming Deng, Fan Li, Shoulong Chen
DOI: 10.1039/D1PY00938A
Dicarboxylic acid-epoxy vitrimers: influence of the off-stoichiometric acid content on cure reactions and thermo-mechanical properties
Jonny J. Blaker, Constantinos Soutis, François Tournilhac, Matthieu Gresil
DOI: 10.1039/D0PY00342E
General approach to prepare polymers bearing pendant isocyanate groups
Rodrigo Navarro, Carolina García, Juan Rodríguez-Hernández, Carlos Elvira, Angel Marcos-Fernández, Alberto Gallardo, Helmut Reinecke
DOI: 10.1039/D0PY00989J
Tailoring polymer dispersity by mixing ATRP initiators
Kostas Parkatzidis, Manon Rolland, Nghia P. Truong, Athina Anastasaki
DOI: 10.1039/D1PY01044A
Structure–property relations of amphiphilic poly(furfuryl glycidyl ether)-block-poly(ethylene glycol) macromonomers at the air–water interface
Alexander Holm, Alexander Southan, Curtis W. Frank
DOI: 10.1039/D0PY00697A
Identifying competitive tin- or metal-free catalyst combinations to tailor polyurethane prepolymer and network properties
Priscilla Arnould, Lionel Bosco, Federico Sanz, Frédéric N. Simon, Stéphane Fouquay, Guillaume Michaud, Jean Raynaud, Vincent Monteil
DOI: 10.1039/D0PY00864H
Nanoengineering with RAFT polymers: from nanocomposite design to applications
Wentao Peng, Yingying Cai, Luise Fanslau, Philipp Vana
DOI: 10.1039/D1PY01172C
こちらもおすすめ
3-イチチルビフェニルはどのように合成されますか?
3-イチチルビフェニルは、ビフェニルとイチプロピオニトリルを回収率約90%で反応させて合成されます。触媒は通常、亜リチウムホウ素を用います。
8-溴-5-三氟甲基喹啉はどのように合成されますか?
8-溴-5-三氟甲基喹啉は、5-トリフルオロメチル-2-メチル-1,3-ベンゼンジオールをブロモエタノールと反応させて生成します。この反応は塩基性条件下で行われ...
ジメチル4-(4,4,5,5-テトラメチル-1,3,2-ドioxaborolan-2-基)-2,6-ピリジンジカルボイル酸フェニルアミニドの代替品はありますか?
ジメチル4-(4,4,5,5-テトラメチル-1,3,2-ドioxaborolan-2-基)-2,6-ピリジンジカルボイル酸フェニルアミニドの代替品としては、4-...
N-(3,5-ヘキサクロロ-4-ピリドインイル)-8-メチオキシ-5-キノリンカーボン酸の市場動向や研究トレンドはどのようなものでしょうか?
N-(3,5-ヘキサクロロ-4-ピリドインイル)-8-メチオキシ-5-キノリンカーボン酸の市場動向は、主に産業用途での需要により影響を受けます。研究トレンドとし...
イソステアロイルグリセリルは安全ですか?
イソステアロイルグリセリルは一般的に安全性が高いとされていますが、過度な使用や個人差により皮�owsん炎などの反応が起こる可能性があります。使用前に医師に相談す...
1-(二苯甲基)-3,3-二氟-氮杂环丁烷の市場動向や研究トレンドはどうですか?
1-(二苯甲基)-3,3-二氟-氮杂环丁烷の市場動向は、医薬品や合成化学の研究分野で注目を集めています。新興研究は、該当化合物の合成改良と生体内での作用メカニズ...
3-チオフェンスチオールの物理化学的性質は何ですか?
3-チオフェンスチオールのCAS番号は7774-73-4です。結晶性の白色粉末で、分子量は122.17です。この化合物は水に微溶解し、エタノールやジクロロメタン...
2-Methyl-2-propanyl (2S)-2-(aminomethyl)-1-piperidinecarboxylateは安全ですか?
2-Methyl-2-propanyl (2S)-2-(aminomethyl)-1-piperidinecarboxylateは一定の安全性基準を満たしていま...
CAS番号1316822-90-8の化合物は安全ですか?
CAS番号1316822-90-8の化合物は安全性に関しては評価が不足していますが、一般的には生物学的に活性な物質であり、取り扱いには適切な安全防護措置が必要で...
Tert-butyl 2-(2-羟基乙基)哌嗪-1-羧酸はどのように保存すればよいですか?
Tert-butyl 2-(2-羟基乙基)哌嗪-1-羧酸は、冷暗所で保存し、直射日光から遠ざけてください。容器は密閉し、高湿度や高温を避けて保管してください。
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.


![1-[6-(1H-Imidazol-1-yl)-3-pyridinyl]methanamine structure 1-[6-(1H-Imidazol-1-yl)-3-pyridinyl]methanamine structure](https://static.chemtradehub.com/structs/914/914637-08-4-8825.webp)

