Concepts for flow chemistry with whole-cell biocatalysts
文献情報
Niklas Adebar, Alina Nastke, Harald Gröger
By combining two fields in chemistry – continuous flow processing and biocatalysis – efficient, stable and cost-effective processes can be realised. On the biocatalyst side, tremendous progress in the rational design of recombinant whole-cell catalysts could be achieved in the past years. Meanwhile, the combination of these powerful catalysts with continuous reactor concepts is beginning to flourish as well. Many processes have been reported in the past years applying such whole-cell catalysts immobilised in packed bed reactors, on walls of microchannels or as living and growing cells in biofilm reactors. In this review, we aim to present and discuss the current state of the art of these different and at the same time often complementary tools.
関連文献
Empirically corrected DFT and semi-empirical methods for non-bonding interactions
Michael E. Foster, Karl Sohlberg
DOI: 10.1039/B912859J
Coherent excitation phenomena in time-resolved experiments
A. Peralta Conde, R. Montero, A. Longarte, F. Castaño
DOI: 10.1039/C0CP00805B
Synergistic effect of crystal and electronic structures on the visible-light-driven photocatalytic performances of Bi2O3 polymorphs
Hefeng Cheng, Baibiao Huang, Jibao Lu, Zeyan Wang, Bing Xu, Xiaoyan Qin, Xiaoyang Zhang, Ying Dai
DOI: 10.1039/C0CP01189D
Quantification of surface species present on a nickel/alumina methane reformingcatalyst
Ian P. Silverwood, Neil G. Hamilton, Christian J. Laycock, John Z. Staniforth, R. Mark Ormerod, Christopher D. Frost, Stewart F. Parker, David Lennon
DOI: 10.1039/B919977B
51V NMR parameters of VOCl3: static and dynamic density functional study from the gas phase to the bulk
Ragnar Bjornsson, Herbert Früchtl, Michael Bühl
DOI: 10.1039/C0CP01176B
Making gold nanoparticles fluorescent for simultaneous absorption and fluorescence detection on the single particle level
Alexander Gaiduk, Paul V. Ruijgrok, Mustafa Yorulmaz, Michel Orrit
DOI: 10.1039/C0CP01389G
The role of molecular modeling in confined systems: impact and prospects
Keith E. Gubbins, Joshua D. Moore, Jeremy C. Palmer
DOI: 10.1039/C0CP01475C
Synthesis and transverse electromechanical characterization of single crystalline ZnO nanoleaves
Ya Yang, Qingliang Liao, Junjie Qi, Wen Guo
DOI: 10.1039/B918326D
Symmetry breaking in the cyclic C3C2H radical
Benjamin Mintz, T. Daniel Crawford
DOI: 10.1039/C0CP00864H
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Reaction Chemistry & Engineering

Reaction Chemistry & Engineering is an interdisciplinary journal reporting cutting-edge research focused on enhancing the understanding and efficiency of reactions. Reaction engineering leverages the interface where fundamental molecular chemistry meets chemical engineering and technology. Challenges in chemistry can be overcome by the application of new technologies, while engineers may find improved solutions for process development from the latest developments in reaction chemistry. Reaction Chemistry & Engineering is a unique forum for researchers whose interests span the broad areas of chemical engineering and chemical sciences to come together in solving problems of importance to wider society. All papers should be written to be approachable by readers across the engineering and chemical sciences. Papers that consider multiple scales, from the laboratory up to and including plant scale, are particularly encouraged.














