Two-dimensional organic–inorganic hybrid Ruddlesden–Popper perovskite materials: preparation, enhanced stability, and applications in photodetection
文献情報
Xiangxin Tian, Yongzhuan Zhang, Rongkun Zheng, Di Wei, Jingquan Liu
Three-dimensional (3D) inorganic–organic hybrid perovskites have attracted considerable attention during the past decade because of their superior optoelectronic properties and broad application prospects, especially in energy-related fields. However, the applications of 3D perovskites, for example, the well-studied CH3NH3PbI3, are severely restrained by their environmental instability, photoinstability, and crystal processing difficulties. In contrast to their 3D counterparts, Ruddlesden–Popper phases, which are layered two-dimensional (2D) perovskites, have shown promising stability and excellent performance in photodetection and solar cell applications, which can be achieved through appropriate selection of organic spacer cations and artificial tuning of the number of perovskite-like layers. Because of their decreased dimensions, novel properties also appear in Ruddlesden–Popper perovskites, such as large exciton binding energy, sensitive photodetection, high photoluminescence quantum yield, and a wide bandgap. In light of this, 2D Ruddlesden–Popper perovskites have garnered much interest in recent years and various methods have been developed for their synthesis, property evaluation, and device fabrication. In this review, recent progress in the synthesis and enhanced ambient stability of 2D Ruddlesden–Popper perovskites is summarized. The applications of these materials in advanced photodetectors are emphasized and challenges limiting their ongoing development are also discussed.
関連文献
Coordination number model to quantify packing morphology of aligned nanowire arrays
Itai Y. Stein, Brian L. Wardle
DOI: 10.1039/C3CP43762K
Polyallylamine-directed green synthesis of platinum nanocubes. Shape and electronic effect codependent enhanced electrocatalytic activity
Gengtao Fu, Ke Wu, Xian Jiang, Lin Tao, Yu Chen, Jun Lin, Yiming Zhou, Shaohua Wei, Yawen Tang, Tianhong Lu, Xinghua Xia
DOI: 10.1039/C3CP44191A
Formation of an electron hole doped film in the α-Fe2O3 photoanode upon electrochemical oxidation‡
Rita Toth, Michael Grätzel, Edwin C. Constable, Artur Braun
DOI: 10.1039/C2CP42597A
Effect of multilayer structure on cyclic performance of Si/Fe anode electrode in Lithium-ion secondary batteries
Hee-Kook Kang, Seong-Rae Lee, Won Il Cho, Byung Won Cho
DOI: 10.1039/C2CP42824E
On the inclusion of alkanes into the monolayer of aliphatic alcohols at the water/alkane vapor interface: a quantum chemical approach
Yuri B. Vysotsky, Elena S. Fomina, Elena A. Belyaeva, Valentin B. Fainerman, Dieter Vollhardt
DOI: 10.1039/C2CP43713A
Possible presence of hydrophilic SO3H nanoclusters on the surface of dry ultrathin Nafion® films: a positron annihilation study
Hamdy F. M. Mohamed, S. Kuroda, Y. Kobayashi, N. Oshima, R. Suzuki
DOI: 10.1039/C2CP43727A
Sophorolipids-functionalized iron oxide nanoparticles
Lorenzo Stievano, Inge Van Bogaert
DOI: 10.1039/C2CP41977G
A new type of low-cost counter electrode catalyst based on platinum nanoparticles loaded onto silicon carbide (Pt/SiC) for dye-sensitized solar cells
Sining Yun, Liang Wang, Chunyu Zhao, Yanxiang Wang, Tingli Ma
DOI: 10.1039/C3CP44048F
Clarifying the role of sodium in the silica oligomerization reaction
Anna Pavlova, Thuat T. Trinh, Rutger A. van Santen, Evert Jan Meijer
DOI: 10.1039/C2CP42436C
こちらもおすすめ
N-乙酰基-L-精氨酸はどのように合成されますか?
N-乙酰基-L-精氨酸は、L-精氨酸をエタノールと酸化アクリル酸で反応させて得られます。この合成過程では、酸化アクリル酸がL-精氨酸のN-アミノグループに結合す...
カウウェルパリミタートを含む廃棄物はどのように処理すべきですか?
カウウェルパリミタートの廃棄物は、化学廃棄物として適切に収集し、専門的な廃棄処理業者に委託します。処理には、有害物質の除去と環境への影響最小化が重要です。温度は...
タテライル1,4,8,11-テトラエチルアセートの代替品はありますか?
タテライル1,4,8,11-テトラエチルアセートの代替品として、他のエチルエステル化合物や、有機窒素化合物が考えられます。ただし、代替品の選択は目的や使用条件に...
異丁卡因を取り扱う際の実験室安全事項は何ですか?
異丁卡因は毒性があり、皮膚や目を刺激する可能性があります。作業中は保護目鏡、防護手袋、防護マスクを使用し、ドラフトチャンバーで扱うべきです。漏えいした場合、その...
4-氯-2-丙基吡啶を取り扱う際の実験室安全事項は何ですか?
4-氯-2-丙基吡啶は有毒で、吸入や皮膚接触を避けることが重要です。PPEとしてゴーグル、マスク、長袖のガウン、手袋を使用し、ドラフトチャンバーを用いて操作しま...
9,10-脱水阿霉素について適用される法規ガイドラインは何ですか?
CAS番号80996-23-2の9,10-脱水阿霉素は、GHS分類においては第3類毒性物質に分類され、REACH規則においてはカテゴリー1の急性毒性物質とされて...
4-(3-溴苯基)噻唑-2-甲酸の物理化学的性質は何ですか?
4-(3-溴苯基)噻唑-2-甲酸の分子量は265.01です。この化合物は水に微溶です。反応性は中程度で、酸性やアルカリ性の条件下で分解する可能性があります。
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩はどの業界で使用されていますか?
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩は、医薬業界、ポリマー業界、センサー業界、半導体業界などで使用されています。この化合物は薬物開発の一部として...
氮卓斯汀杂质Eを取り扱う際の実験室安全事項は何ですか?
氮卓斯汀杂质E(CAS番号: 20526-97-0)を扱う際は、ゴーグルとシールド付きの手袋を使用し、漏洩がある場合はドラフトチャンバーを使用して処理することを...
デシシボチル-n-ブチルボルテゾミブはどのように保存すればよいですか?
デシシボチル-n-ブチルボルテゾミブは室温で保管し、直日光から遠ざけて密栓容器に保管することが推奨されます。















